Loading...
Loading...
Loading...
Availability: In Stock
Weaver Six Hole Tactical 1" rings deliver the rigid, no-slip mounting your optics demand whether you're dialing in at the range, hunting hard country, or running precision drills. Built from aircraft-grade aluminum, these matte-finish tactical rings use a six-point contact design to clamp your scope or red dot with zero flex. The engineering here is straightforward: more contact points mean more clamping surface, which means your zero stays put through recoil, rough handling, and the kind of field abuse that separates gear that works from gear that fails.
The 1" ring diameter accommodates the most common scope tube size in hunting and tactical rifles, and the matte finish resists glare without the fragility of gloss coatings. Six-hole design isn't flashy marketing—it's a practical approach to load distribution. Instead of relying on four or fewer bearing points, Weaver spreads the clamping force across a larger footprint, which reduces stress concentration on the ring body and the scope tube itself. That matters when you're expecting your optic to hold zero under demanding conditions.
Fit and finish reflect Weaver's reputation for no-nonsense mounting hardware. If you're building a duty rifle, assembling a hunter's rig, or setting up a precision platform that needs to handle both range work and field use without ceremony, tactical rings that prioritize contact area and material quality are foundational. These rings are purpose-built to earn your confidence, not to be the flashiest thing on your gun.
| Tube Diameter | 1" |
| Material | Aircraft-Grade Aluminum |
| Finish | Matte |
| Contact Points | Six |
| Style | Tactical |
These are 1" rings, which fit the vast majority of hunting and tactical rifle scopes. If you're unsure of your scope's tube diameter, check your optic's manual or measure the tube itself—it'll be clearly marked on most scopes.
Six contact points distribute the clamping force over a larger area, reducing stress on any single bearing point. This approach improves zero stability and can extend the lifespan of both the rings and your scope tube, especially under recoil and rough handling.
These are Weaver-style rings designed for Weaver bases and rails. If your firearm uses Picatinny, you'll need Picatinny rings instead. Weaver and Picatinny are similar but not interchangeable.
Matte anodized aluminum resists corrosion and fingerprints better than gloss finishes. The finish will show use over time, but that's part of the character of working gear. For best longevity, wipe down your rifle after exposure to heavy moisture.
SKU: 114465650 • Width: 5in • Height: 1.25in • Depth: 5.75in • Weight: 0.38oz
Availability: In Stock
Weaver Six Hole Tactical 1" rings deliver the rigid, no-slip mounting your optics demand whether you're dialing in at the range, hunting hard country, or running precision drills. Built from aircraft-grade aluminum, these matte-finish tactical rings use a six-point contact design to clamp your scope or red dot with zero flex. The engineering here is straightforward: more contact points mean more clamping surface, which means your zero stays put through recoil, rough handling, and the kind of field abuse that separates gear that works from gear that fails.
The 1" ring diameter accommodates the most common scope tube size in hunting and tactical rifles, and the matte finish resists glare without the fragility of gloss coatings. Six-hole design isn't flashy marketing—it's a practical approach to load distribution. Instead of relying on four or fewer bearing points, Weaver spreads the clamping force across a larger footprint, which reduces stress concentration on the ring body and the scope tube itself. That matters when you're expecting your optic to hold zero under demanding conditions.
Fit and finish reflect Weaver's reputation for no-nonsense mounting hardware. If you're building a duty rifle, assembling a hunter's rig, or setting up a precision platform that needs to handle both range work and field use without ceremony, tactical rings that prioritize contact area and material quality are foundational. These rings are purpose-built to earn your confidence, not to be the flashiest thing on your gun.
| Tube Diameter | 1" |
| Material | Aircraft-Grade Aluminum |
| Finish | Matte |
| Contact Points | Six |
| Style | Tactical |
These are 1" rings, which fit the vast majority of hunting and tactical rifle scopes. If you're unsure of your scope's tube diameter, check your optic's manual or measure the tube itself—it'll be clearly marked on most scopes.
Six contact points distribute the clamping force over a larger area, reducing stress on any single bearing point. This approach improves zero stability and can extend the lifespan of both the rings and your scope tube, especially under recoil and rough handling.
These are Weaver-style rings designed for Weaver bases and rails. If your firearm uses Picatinny, you'll need Picatinny rings instead. Weaver and Picatinny are similar but not interchangeable.
Matte anodized aluminum resists corrosion and fingerprints better than gloss finishes. The finish will show use over time, but that's part of the character of working gear. For best longevity, wipe down your rifle after exposure to heavy moisture.
SKU: 114465650 • Width: 5in • Height: 1.25in • Depth: 5.75in • Weight: 0.38oz
