$34.70
Loading...
Loading...
Loading...
Availability: In Stock
The Weaver No Gunsmith Saddle Mount is a straightforward way to add an optic or laser sight to your shotgun—no drilling, tapping, or permanent modifications required. Unlike traditional mounting solutions that demand a trip to the gunsmith, this no-gunsmith saddle mount uses your existing receiver pins to secure itself in place. Simply remove the trigger group pins (on Remington models) or the ejector screw and trigger pin (on Mossberg models), slide the mount into position, align the holes, and reinstall the replacement pins that come in the box. You're done.
The low-profile design hugs the receiver, keeping the sight close to the bore axis for a natural sight picture and minimal height over bore. Its form-fitting profile looks like it belongs there—no ungainly add-on appearance. The mount's 5-inch rail features seven cross-slots, giving you genuine flexibility to position Weaver top-mount rings, optics, or laser accessories at the eye relief distance that works best for your shooting style and optic choice.
Built from reinforced molded polymer, this mount is surprisingly tough. It won't rattle or flex, and it's rated to handle temperature extremes from -40°F to 150°F, whether you're hunting in a Manitoba winter or a Texas summer. The matte finish resists glare and blends into any shotgun finish. Lightweight design means it adds minimal bulk to your gun.
| Mount Style | Saddle Mount |
| Material | Reinforced Molded Polymer |
| Finish | Matte |
| Rail Length | 5 inches |
| Cross-Slots | 7 |
| Temperature Range | -40°F to 150°F |
| Installation Method | Pin-based (no gunsmithing) |
The no gunsmith saddle mount is designed for Remington and Mossberg shotguns. For Remington, you'll remove the two trigger group pins; for Mossberg, you'll remove the ejector screw and trigger pin. If you own a different shotgun brand, check the product details or contact us to confirm compatibility.
The mount's 5-inch rail with seven cross-slots accepts Weaver top-mount rings and other standard Weaver-compatible accessories. This gives you flexibility to install rifle scopes, red dots, or laser sights depending on your hunting or shooting needs.
The mount comes with replacement pins needed for installation. You'll use these pins to secure the saddle mount to your shotgun's receiver in place of the original pins you remove.
No. This is a reversible installation—no drilling, tapping, or welding. You simply swap out the existing receiver pins temporarily. If you ever want to remove the mount, you can reinstall the original pins and return your shotgun to its unmodified state.
SKU: 114461342 • Width: 4in • Height: 1.7in • Depth: 9.1in • Weight: 0.3oz
Availability: In Stock
The Weaver No Gunsmith Saddle Mount is a straightforward way to add an optic or laser sight to your shotgun—no drilling, tapping, or permanent modifications required. Unlike traditional mounting solutions that demand a trip to the gunsmith, this no-gunsmith saddle mount uses your existing receiver pins to secure itself in place. Simply remove the trigger group pins (on Remington models) or the ejector screw and trigger pin (on Mossberg models), slide the mount into position, align the holes, and reinstall the replacement pins that come in the box. You're done.
The low-profile design hugs the receiver, keeping the sight close to the bore axis for a natural sight picture and minimal height over bore. Its form-fitting profile looks like it belongs there—no ungainly add-on appearance. The mount's 5-inch rail features seven cross-slots, giving you genuine flexibility to position Weaver top-mount rings, optics, or laser accessories at the eye relief distance that works best for your shooting style and optic choice.
Built from reinforced molded polymer, this mount is surprisingly tough. It won't rattle or flex, and it's rated to handle temperature extremes from -40°F to 150°F, whether you're hunting in a Manitoba winter or a Texas summer. The matte finish resists glare and blends into any shotgun finish. Lightweight design means it adds minimal bulk to your gun.
| Mount Style | Saddle Mount |
| Material | Reinforced Molded Polymer |
| Finish | Matte |
| Rail Length | 5 inches |
| Cross-Slots | 7 |
| Temperature Range | -40°F to 150°F |
| Installation Method | Pin-based (no gunsmithing) |
The no gunsmith saddle mount is designed for Remington and Mossberg shotguns. For Remington, you'll remove the two trigger group pins; for Mossberg, you'll remove the ejector screw and trigger pin. If you own a different shotgun brand, check the product details or contact us to confirm compatibility.
The mount's 5-inch rail with seven cross-slots accepts Weaver top-mount rings and other standard Weaver-compatible accessories. This gives you flexibility to install rifle scopes, red dots, or laser sights depending on your hunting or shooting needs.
The mount comes with replacement pins needed for installation. You'll use these pins to secure the saddle mount to your shotgun's receiver in place of the original pins you remove.
No. This is a reversible installation—no drilling, tapping, or welding. You simply swap out the existing receiver pins temporarily. If you ever want to remove the mount, you can reinstall the original pins and return your shotgun to its unmodified state.
SKU: 114461342 • Width: 4in • Height: 1.7in • Depth: 9.1in • Weight: 0.3oz