$65.89
Availability: In Stock
Weaver Mounts 99690 Picatinny six-hole scope rings deliver the rugged, secure mounting foundation serious shooters need for precision rifles. Built from black anodized aluminum, these extra-high rings combine Weaver's proven six-screw design with a modern Picatinny crossbolt interface—giving you the flexibility to run your setup on any tactical or Picatinny rail system. Whether you're building a precision rifle platform for competition, duty, or long-range hunting, these rings hold zero and stay there.
The six-hole design isn't just traditional—it's tactical redundancy. Each screw point distributes clamping pressure evenly across the ring, preventing scope creep and ring slippage even under recoil or extended shooting sessions. The Type III hard coat anodized finish resists corrosion and abuse, so your rings will outlast most optics they carry. Torx fasteners eliminate the risk of stripping, ensuring repeatable torque every time you service or adjust your mount.
Height is everything in rifle building, and Weaver stepped up here: the extra-high profile opens your mounting options across a broader range of barrel profiles, receiver geometries, and co-witness requirements. Whether you're pairing them with a compact red dot, a full-size tactical scope, or running offset mounted backup optics, these rings give you the vertical real estate to make it work. Built for LE and military environments but equally at home on a dedicated range or hunting rifle, Weaver's six-hole Picatinny rings are the no-nonsense choice when proper mounting matters.
| Model | Weaver 99690 |
| Ring Type | Picatinny Six-Hole |
| Tube Diameter | 1 inch |
| Height | Extra High |
| Material | Aluminum |
| Finish | Type III Hard Coat Black Anodized |
| Fastener Type | Torx Screws |
| Mounting Interface | Picatinny/MIL-STD-1913 |
Yes. The 99690 features a Picatinny crossbolt design that interfaces with any Picatinny or MIL-STD-1913 rail system. They're also compatible with traditional Weaver-pattern rails.
These are 1-inch rings. They're designed for 1-inch scope tubes; they are not compatible with 30mm tubes.
Six contact points distribute clamping pressure more evenly across the scope tube, reducing the risk of ring slippage, tube deformation, and zero shift under recoil or heavy use. This redundancy is why they're favored in tactical and precision rifle applications.
Extra-high rings clear most standard barrels and high-mounted rail systems. They're designed for applications where standard or medium heights won't provide adequate clearance or co-witness. If you're unsure whether your specific setup will work, verify the barrel diameter and rail height against your scope's tube diameter and objective bell size.
SKU: 114462188 • Width: 4.5in • Height: 1.1in • Depth: 4.8in • Weight: 0.38oz
Availability: In Stock
Weaver Mounts 99690 Picatinny six-hole scope rings deliver the rugged, secure mounting foundation serious shooters need for precision rifles. Built from black anodized aluminum, these extra-high rings combine Weaver's proven six-screw design with a modern Picatinny crossbolt interface—giving you the flexibility to run your setup on any tactical or Picatinny rail system. Whether you're building a precision rifle platform for competition, duty, or long-range hunting, these rings hold zero and stay there.
The six-hole design isn't just traditional—it's tactical redundancy. Each screw point distributes clamping pressure evenly across the ring, preventing scope creep and ring slippage even under recoil or extended shooting sessions. The Type III hard coat anodized finish resists corrosion and abuse, so your rings will outlast most optics they carry. Torx fasteners eliminate the risk of stripping, ensuring repeatable torque every time you service or adjust your mount.
Height is everything in rifle building, and Weaver stepped up here: the extra-high profile opens your mounting options across a broader range of barrel profiles, receiver geometries, and co-witness requirements. Whether you're pairing them with a compact red dot, a full-size tactical scope, or running offset mounted backup optics, these rings give you the vertical real estate to make it work. Built for LE and military environments but equally at home on a dedicated range or hunting rifle, Weaver's six-hole Picatinny rings are the no-nonsense choice when proper mounting matters.
| Model | Weaver 99690 |
| Ring Type | Picatinny Six-Hole |
| Tube Diameter | 1 inch |
| Height | Extra High |
| Material | Aluminum |
| Finish | Type III Hard Coat Black Anodized |
| Fastener Type | Torx Screws |
| Mounting Interface | Picatinny/MIL-STD-1913 |
Yes. The 99690 features a Picatinny crossbolt design that interfaces with any Picatinny or MIL-STD-1913 rail system. They're also compatible with traditional Weaver-pattern rails.
These are 1-inch rings. They're designed for 1-inch scope tubes; they are not compatible with 30mm tubes.
Six contact points distribute clamping pressure more evenly across the scope tube, reducing the risk of ring slippage, tube deformation, and zero shift under recoil or heavy use. This redundancy is why they're favored in tactical and precision rifle applications.
Extra-high rings clear most standard barrels and high-mounted rail systems. They're designed for applications where standard or medium heights won't provide adequate clearance or co-witness. If you're unsure whether your specific setup will work, verify the barrel diameter and rail height against your scope's tube diameter and objective bell size.
SKU: 114462188 • Width: 4.5in • Height: 1.1in • Depth: 4.8in • Weight: 0.38oz