$33.56
Availability: In Stock
The Weaver 49042 Top Mount 1" High Quick Detach ring delivers reliable scope mounting without the hassle of permanent installation. Built for hunters and shooters who want to swap optics between rifles or simply remove a scope for safe storage or transport, this quick detach mount combines the simplicity of tool-free removal with the rock-solid repeatability you expect from Weaver quality. The 1" height suits standard-diameter optics and works across most rifle platforms where Weaver-pattern bases are already in place.
The design uses an aluminum saddle to keep overall weight down—something every distance shooter and backcountry hunter appreciates—while a steel strap reinforces the clamping area for the strength needed to handle recoil and rough handling in the field. The quick detach mechanism is genuinely quick: loosen the two thumb nuts and the ring lifts clear; tighten them again and you're back in zero (repeatability is a Weaver hallmark). No tools, no fuss, and no risk of cross-threading a fastener.
If you're running multiple scopes, testing optics before a hunt, or just prefer the option to remove your glass when the rifle gets packed, this mount earns its spot in your setup. Matte black anodized finish resists glare and blends with most modern rifle builds.
| Ring Height | 1" |
| Ring Diameter | 1" |
| Material | Aluminum saddle with steel strap |
| Finish | Matte black |
| Mount Type | Quick detach top mount |
| Mounting Standard | Weaver-pattern base |
Yes, the 49042 is designed for Weaver-pattern scope bases, which are standard on most modern rifles and many vintage platforms. If you're unsure whether your base is Weaver-compatible, check your rifle's manual or contact the base manufacturer.
No. The quick detach system uses only thumb nuts—loosen them by hand to remove the ring, and hand-tighten them again to remount. No screwdrivers, wrenches, or hex keys needed.
Weaver's design and manufacturing reputation for precision means that when installed correctly and thumb nuts are tightened snugly each time, the ring should return to zero reliably. As with any scope mount, proper initial setup and consistent installation technique matter.
The 1" height refers to the vertical distance from the Weaver base to the center of the ring. This ring is designed for scopes with 1" diameter tubes—the standard size for most hunting and sport optics. Verify your scope's tube diameter before purchasing.
SKU: 114461127 • Width: 4.8in • Height: 1.2in • Depth: 4.9in • Weight: 0.31oz
Availability: In Stock
The Weaver 49042 Top Mount 1" High Quick Detach ring delivers reliable scope mounting without the hassle of permanent installation. Built for hunters and shooters who want to swap optics between rifles or simply remove a scope for safe storage or transport, this quick detach mount combines the simplicity of tool-free removal with the rock-solid repeatability you expect from Weaver quality. The 1" height suits standard-diameter optics and works across most rifle platforms where Weaver-pattern bases are already in place.
The design uses an aluminum saddle to keep overall weight down—something every distance shooter and backcountry hunter appreciates—while a steel strap reinforces the clamping area for the strength needed to handle recoil and rough handling in the field. The quick detach mechanism is genuinely quick: loosen the two thumb nuts and the ring lifts clear; tighten them again and you're back in zero (repeatability is a Weaver hallmark). No tools, no fuss, and no risk of cross-threading a fastener.
If you're running multiple scopes, testing optics before a hunt, or just prefer the option to remove your glass when the rifle gets packed, this mount earns its spot in your setup. Matte black anodized finish resists glare and blends with most modern rifle builds.
| Ring Height | 1" |
| Ring Diameter | 1" |
| Material | Aluminum saddle with steel strap |
| Finish | Matte black |
| Mount Type | Quick detach top mount |
| Mounting Standard | Weaver-pattern base |
Yes, the 49042 is designed for Weaver-pattern scope bases, which are standard on most modern rifles and many vintage platforms. If you're unsure whether your base is Weaver-compatible, check your rifle's manual or contact the base manufacturer.
No. The quick detach system uses only thumb nuts—loosen them by hand to remove the ring, and hand-tighten them again to remount. No screwdrivers, wrenches, or hex keys needed.
Weaver's design and manufacturing reputation for precision means that when installed correctly and thumb nuts are tightened snugly each time, the ring should return to zero reliably. As with any scope mount, proper initial setup and consistent installation technique matter.
The 1" height refers to the vertical distance from the Weaver base to the center of the ring. This ring is designed for scopes with 1" diameter tubes—the standard size for most hunting and sport optics. Verify your scope's tube diameter before purchasing.
SKU: 114461127 • Width: 4.8in • Height: 1.2in • Depth: 4.9in • Weight: 0.31oz
