$8.49
Availability: In Stock
The Weaver #46 Top Mount Base is a gloss-finished precision scope mount designed to deliver rock-solid accuracy on a wide variety of classic and modern rifles. If you're mounting a scope on a vintage Winchester, Savage, Weatherby, or Mauser, or restoring an older sporting rifle to service, this top-mount base gives you the rock-solid platform that separates reliable shooting from frustration. Weaver's engineering centers on tight machining tolerances and a square-cut notch design that locks squarely into the cross bolt of every Weaver detachable ring—the result is zero play and consistent return to zero, shot after shot.
This base is built to absorb recoil without slipping or shifting. The gloss finish is durable and designed to hold up to field use while maintaining a clean, traditional appearance that suits both hunting rifles and range guns. Because the base is a permanent fixture on your rifle, Weaver machines each one to close tolerances to ensure a custom fit that pairs seamlessly with your specific rifle model.
Weaver #46 bases fit an extensive range of rifles spanning decades of manufacturing. Whether you're working with a Savage 110 series, Winchester 52, 54, or 70, a Weatherby Mark 5, or any of the other supported models listed below, you get the same precision engineering. This is the kind of foundation that lets you trust your optic setup in the field or on the bench.
| Brand | Weaver |
| Model | #46 Top Mount Base |
| Finish | Gloss |
| Mount Type | Top mount |
The #46 is designed to fit a wide range of rifles including Anschutz 1568, Beretta Mato (front), Browning BLT ACT Hi Power and BBR models, CIL 950/950C/972C, Colt 57, Cooey 71, H&R 300/301LA/330/370, Herters J9, High-Standard High-Power, Marlin 455, Mauser 95/98/99/FN/ZB, Musgrave Mark I–IV, Parker-Hale 1000/1000C/1100/1200/1700, Savage 110/110E/110S/111/112R/112V/112FV/116FSS, Sears 50/51/51L/53, Stevens 110E, Voere 2150/2165/1-4, Weatherby Mark 5 and FN, and Winchester 52/54/70LA/SA/670/770. Check the full list against your rifle's make and model before ordering.
This base is designed to pair with Weaver detachable rings that use a cross bolt. The square-cut notch on the base mates precisely with the bolt in every compatible Weaver ring, ensuring a secure, zero-play connection.
The gloss finish is engineered for durability in field conditions and resists corrosion. It also maintains a traditional aesthetic that works well on hunting and sport rifles.
The #46 is engineered as a top-mount base. On Winchester 52 rifles, the hole spacing allows it to serve in both front and rear positions, but compatibility varies by rifle model—verify fit for your specific application.
SKU: 114461791 • Width: 3.5in • Height: 0.5in • Depth: 8in • Weight: 0.06oz
Availability: In Stock
The Weaver #46 Top Mount Base is a gloss-finished precision scope mount designed to deliver rock-solid accuracy on a wide variety of classic and modern rifles. If you're mounting a scope on a vintage Winchester, Savage, Weatherby, or Mauser, or restoring an older sporting rifle to service, this top-mount base gives you the rock-solid platform that separates reliable shooting from frustration. Weaver's engineering centers on tight machining tolerances and a square-cut notch design that locks squarely into the cross bolt of every Weaver detachable ring—the result is zero play and consistent return to zero, shot after shot.
This base is built to absorb recoil without slipping or shifting. The gloss finish is durable and designed to hold up to field use while maintaining a clean, traditional appearance that suits both hunting rifles and range guns. Because the base is a permanent fixture on your rifle, Weaver machines each one to close tolerances to ensure a custom fit that pairs seamlessly with your specific rifle model.
Weaver #46 bases fit an extensive range of rifles spanning decades of manufacturing. Whether you're working with a Savage 110 series, Winchester 52, 54, or 70, a Weatherby Mark 5, or any of the other supported models listed below, you get the same precision engineering. This is the kind of foundation that lets you trust your optic setup in the field or on the bench.
| Brand | Weaver |
| Model | #46 Top Mount Base |
| Finish | Gloss |
| Mount Type | Top mount |
The #46 is designed to fit a wide range of rifles including Anschutz 1568, Beretta Mato (front), Browning BLT ACT Hi Power and BBR models, CIL 950/950C/972C, Colt 57, Cooey 71, H&R 300/301LA/330/370, Herters J9, High-Standard High-Power, Marlin 455, Mauser 95/98/99/FN/ZB, Musgrave Mark I–IV, Parker-Hale 1000/1000C/1100/1200/1700, Savage 110/110E/110S/111/112R/112V/112FV/116FSS, Sears 50/51/51L/53, Stevens 110E, Voere 2150/2165/1-4, Weatherby Mark 5 and FN, and Winchester 52/54/70LA/SA/670/770. Check the full list against your rifle's make and model before ordering.
This base is designed to pair with Weaver detachable rings that use a cross bolt. The square-cut notch on the base mates precisely with the bolt in every compatible Weaver ring, ensuring a secure, zero-play connection.
The gloss finish is engineered for durability in field conditions and resists corrosion. It also maintains a traditional aesthetic that works well on hunting and sport rifles.
The #46 is engineered as a top-mount base. On Winchester 52 rifles, the hole spacing allows it to serve in both front and rear positions, but compatibility varies by rifle model—verify fit for your specific application.
SKU: 114461791 • Width: 3.5in • Height: 0.5in • Depth: 8in • Weight: 0.06oz