$122.00
Availability: In Stock
The Weaver Premium MSR Optics Mount is a one-piece 30mm scope mount purpose-built for modern sporting rifles. If you run an AR or similar MSR platform and need a solid, American-made foundation for your optics, this integral mount handles the job without compromise. The single-piece aluminum construction eliminates the wobble and misalignment that can creep in with two-piece rings, while the forward cantilever design positions your scope at the ideal sight line for MSR ergonomics.
Built from 7075-T6 aircraft-grade aluminum and finished in Type III hardcoat anodized black, this mount is built to take punishment. The dual recoil lugs lock firmly into your receiver, and the Torx-head screws deliver 3,600 lbs of clamping force—more than lever-mounting systems offer. At just 6 oz, the weight penalty is negligible, and the slightly radiused edges mean no snagging on gear or during transitions. This is the kind of mount that works hard and stays out of your way.
Weaver backs this build with domestic manufacturing, so you're supporting US production while getting a mount that'll hold zero through thousands of rounds. Whether you're setting up a competition rifle, a home-defense AR, or a hunting build, the Premium MSR mount delivers the stability and durability serious shooters expect.
| Material | 7075-T6 aircraft-grade aluminum |
| Finish | Type III hardcoat anodized black matte |
| Mount Type | One-piece integral |
| Ring Diameter | 30mm |
| Height (centerline) | 1.5" from bottom of base to ring centerline |
| Ring-to-Base Drop | .912" from bottom of ring to bottom of base |
| Clamping Force | 3,600 lbs |
| Fastener Type | Torx-head screws |
| Weight | 6 oz |
| Origin | Made in USA |
Yes. The Weaver Premium MSR Optics Mount is designed specifically for MSR platforms. The dual recoil lugs lock into standard MSR receiver dimensions, and the cantilever design positions your optics at the correct height for AR ergonomics.
The 30mm dimension refers to the diameter of the scope tube that fits inside the rings. Check your scope's specifications to confirm it has a 30mm tube. Most modern tactical and hunting scopes use either 30mm or 1-inch tubes.
The entire mount weighs just 6 oz—barely noticeable on any MSR platform. The 7075-T6 aluminum keeps it light without sacrificing strength or rigidity.
A one-piece integral design eliminates the potential for ring misalignment and eliminates the need for a separate base. The result is a more stable platform with fewer components to maintain zero.
SKU: 167523177 • Width: 3.1in • Height: 2.6in • Depth: 13in • Weight: 1.2688oz
Availability: In Stock
The Weaver Premium MSR Optics Mount is a one-piece 30mm scope mount purpose-built for modern sporting rifles. If you run an AR or similar MSR platform and need a solid, American-made foundation for your optics, this integral mount handles the job without compromise. The single-piece aluminum construction eliminates the wobble and misalignment that can creep in with two-piece rings, while the forward cantilever design positions your scope at the ideal sight line for MSR ergonomics.
Built from 7075-T6 aircraft-grade aluminum and finished in Type III hardcoat anodized black, this mount is built to take punishment. The dual recoil lugs lock firmly into your receiver, and the Torx-head screws deliver 3,600 lbs of clamping force—more than lever-mounting systems offer. At just 6 oz, the weight penalty is negligible, and the slightly radiused edges mean no snagging on gear or during transitions. This is the kind of mount that works hard and stays out of your way.
Weaver backs this build with domestic manufacturing, so you're supporting US production while getting a mount that'll hold zero through thousands of rounds. Whether you're setting up a competition rifle, a home-defense AR, or a hunting build, the Premium MSR mount delivers the stability and durability serious shooters expect.
| Material | 7075-T6 aircraft-grade aluminum |
| Finish | Type III hardcoat anodized black matte |
| Mount Type | One-piece integral |
| Ring Diameter | 30mm |
| Height (centerline) | 1.5" from bottom of base to ring centerline |
| Ring-to-Base Drop | .912" from bottom of ring to bottom of base |
| Clamping Force | 3,600 lbs |
| Fastener Type | Torx-head screws |
| Weight | 6 oz |
| Origin | Made in USA |
Yes. The Weaver Premium MSR Optics Mount is designed specifically for MSR platforms. The dual recoil lugs lock into standard MSR receiver dimensions, and the cantilever design positions your optics at the correct height for AR ergonomics.
The 30mm dimension refers to the diameter of the scope tube that fits inside the rings. Check your scope's specifications to confirm it has a 30mm tube. Most modern tactical and hunting scopes use either 30mm or 1-inch tubes.
The entire mount weighs just 6 oz—barely noticeable on any MSR platform. The 7075-T6 aluminum keeps it light without sacrificing strength or rigidity.
A one-piece integral design eliminates the potential for ring misalignment and eliminates the need for a separate base. The result is a more stable platform with fewer components to maintain zero.
SKU: 167523177 • Width: 3.1in • Height: 2.6in • Depth: 13in • Weight: 1.2688oz