Warne Scope Mounts114461671
Warne MSR Extended Skeletonized 30mm Mount Gen 2 - Dark Earth$149.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne MSR Extended Skeletonized 30mm Mount Gen 2 is a lightweight scope mount built for modern MSR-pattern rifles and similar platforms. This is Warne's second-generation take on the skeletonized mounting solution, engineered to cut weight while maintaining the rock-solid return-to-zero performance the brand is known for. If you're running a mid-range optic on a tactical or hunting rifle and want to shed ounces without compromising strength or repeatability, this mount earns its place on your gun.
The Gen 2 design starts with 6061 aluminum CNC-machined to remove over 30% of the weight found in Warne's original R.A.M.P. Mount platform—the savings come from a skeletonized body and ring caps that don't cut corners on durability. What sets this Extended version apart is the extra inch of forward cantilever compared to the original skeletonized mount. That additional reach is genuinely useful: it gives you proper eye relief when you're running scopes with larger eye boxes, and it buys you precious rail space behind the optic for accessories like Warne's 45° side-mount adaptor. The 1-piece side clamp design adds rigidity where it matters most.
Hardware is #8 Torx fasteners paired with steel threaded inserts—a detail that matters if you plan to re-torque or service the mount over the life of your rifle. The Mil-Spec OD Green finish fits right in with modern tactical or hunting setups. Attach it with the dual 1/2" tactical nuts (torque to 65 in/lb), and you've got a mount that sits at the ideal height for MSR platforms while keeping your rifle's overall weight in check.
| Ring Diameter | 30mm |
| Material | 6061 Aluminum (CNC machined) |
| Mount Type | 1-piece side clamp |
| Cantilever Extension | Extended (1 inch forward vs. original SKEL mount) |
| Fastener Type | #8 Torx with steel threaded inserts |
| Attachment | Dual 1/2" tactical nuts |
| Recommended Torque | 65 in/lb |
| Finish | Mil-Spec OD Green |
| Platform | MSR and similar platforms |
The Warne MSR Extended Skeletonized 30mm Mount Gen 2 is built for MSR-pattern rifles and similar platforms. It places your optic at the ideal height for these systems.
The Gen 2 Extended Skeletonized design reduces weight by over 30% compared to Warne's R.A.M.P. Mount through the use of a skeletonized aluminum body and ring caps.
The extended 1-inch forward cantilever compared to the original skeletonized mount provides better eye relief when using scopes with large eye boxes and creates additional rail space behind the mount for accessories like the Warne 45° side-mount adaptor.
The mount uses dual 1/2" tactical nuts for attachment. Warne recommends torquing to 65 in/lb. The #8 Torx fasteners include steel threaded inserts to prevent stripping during installation and future service.
SKU: 114463059 • Width: 6.5in • Height: 2.75in • Depth: 7.25in • Weight: 0.56oz
Availability: In Stock
The Warne MSR Extended Skeletonized 30mm Mount Gen 2 is a lightweight scope mount built for modern MSR-pattern rifles and similar platforms. This is Warne's second-generation take on the skeletonized mounting solution, engineered to cut weight while maintaining the rock-solid return-to-zero performance the brand is known for. If you're running a mid-range optic on a tactical or hunting rifle and want to shed ounces without compromising strength or repeatability, this mount earns its place on your gun.
The Gen 2 design starts with 6061 aluminum CNC-machined to remove over 30% of the weight found in Warne's original R.A.M.P. Mount platform—the savings come from a skeletonized body and ring caps that don't cut corners on durability. What sets this Extended version apart is the extra inch of forward cantilever compared to the original skeletonized mount. That additional reach is genuinely useful: it gives you proper eye relief when you're running scopes with larger eye boxes, and it buys you precious rail space behind the optic for accessories like Warne's 45° side-mount adaptor. The 1-piece side clamp design adds rigidity where it matters most.
Hardware is #8 Torx fasteners paired with steel threaded inserts—a detail that matters if you plan to re-torque or service the mount over the life of your rifle. The Mil-Spec OD Green finish fits right in with modern tactical or hunting setups. Attach it with the dual 1/2" tactical nuts (torque to 65 in/lb), and you've got a mount that sits at the ideal height for MSR platforms while keeping your rifle's overall weight in check.
| Ring Diameter | 30mm |
| Material | 6061 Aluminum (CNC machined) |
| Mount Type | 1-piece side clamp |
| Cantilever Extension | Extended (1 inch forward vs. original SKEL mount) |
| Fastener Type | #8 Torx with steel threaded inserts |
| Attachment | Dual 1/2" tactical nuts |
| Recommended Torque | 65 in/lb |
| Finish | Mil-Spec OD Green |
| Platform | MSR and similar platforms |
The Warne MSR Extended Skeletonized 30mm Mount Gen 2 is built for MSR-pattern rifles and similar platforms. It places your optic at the ideal height for these systems.
The Gen 2 Extended Skeletonized design reduces weight by over 30% compared to Warne's R.A.M.P. Mount through the use of a skeletonized aluminum body and ring caps.
The extended 1-inch forward cantilever compared to the original skeletonized mount provides better eye relief when using scopes with large eye boxes and creates additional rail space behind the mount for accessories like the Warne 45° side-mount adaptor.
The mount uses dual 1/2" tactical nuts for attachment. Warne recommends torquing to 65 in/lb. The #8 Torx fasteners include steel threaded inserts to prevent stripping during installation and future service.
SKU: 114463059 • Width: 6.5in • Height: 2.75in • Depth: 7.25in • Weight: 0.56oz