Warne Scope Mounts114465928
Warne Mountain Tech 1-Piece Picatinny Base Matte for Winchester 70 Long Action, 20 MOA$67.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne Mountain Tech 1-Piece Picatinny Base for Winchester 70 Long Action is engineered for hunters who count every ounce on the pack in and every shot on the mountain. A rifle scope mounting system lives or dies by its ability to repeatably hold zero while staying light enough that you're not paying for those extra grams in your legs at 10,000 feet. This single-piece base delivers on that promise: precision machined from 7075-T6 aluminum for high strength without bulk, with a mil-spec hardcoat anodized finish in matte to handle the wear and weather of serious backcountry hunting.
The base mounts directly to Winchester 70 Long Action receiver drilled-and-tapped holes and accepts standard Picatinny rail rings and optics. Hardware is black zinc-coated for corrosion resistance in wet conditions, and the self-centering tapered T-15 Torx screws ensure consistent, repeatable assembly—no guessing whether your scope is straight when you're breaking camp in the dark.
Warne Mountain Tech mounts are built on the principle that every component serves lightweight precision. For hunters running a modern long-range hunting rifle or a traditional Winchester 70 with a quality optic, this base provides the foundation that won't shift and won't weigh you down. If you're serious about the shot when it matters most, the base is where precision starts.
| Manufacturer | Warne Scope Mounts |
| Product Line | Mountain Tech |
| Type | 1-Piece Picatinny Base |
| Material | 7075-T6 Aluminum |
| Finish | Mil-Spec Hardcoat Anodized Matte |
| Hardware | Black Zinc Coated |
| Compatibility | Winchester 70 Long Action |
| Rail Type | Picatinny; Weaver-compatible |
| Fasteners | Self-Centering Tapered T-15 Torx |
Yes—this base is designed specifically for Winchester 70 Long Action receivers with factory drilled-and-tapped holes. Verify your rifle's action length before ordering.
The base accepts any Picatinny-rail rings or Weaver-compatible rings. You'll supply your own scope rings to complete the mounting system.
The finish is matte (non-reflective), which reduces glint and is standard for field hunting rifles.
Warne Mountain Tech uses 7075-T6 aluminum, mil-spec hardcoat anodized finish, and self-centering Torx screws to deliver repeatable zero and corrosion resistance while minimizing weight—essential for backcountry and long-range hunting where every ounce and every shot count.
SKU: 114464498 • Width: 3.3in • Height: 0.7in • Depth: 8.4in • Weight: 0.19oz
Availability: In Stock
The Warne Mountain Tech 1-Piece Picatinny Base for Winchester 70 Long Action is engineered for hunters who count every ounce on the pack in and every shot on the mountain. A rifle scope mounting system lives or dies by its ability to repeatably hold zero while staying light enough that you're not paying for those extra grams in your legs at 10,000 feet. This single-piece base delivers on that promise: precision machined from 7075-T6 aluminum for high strength without bulk, with a mil-spec hardcoat anodized finish in matte to handle the wear and weather of serious backcountry hunting.
The base mounts directly to Winchester 70 Long Action receiver drilled-and-tapped holes and accepts standard Picatinny rail rings and optics. Hardware is black zinc-coated for corrosion resistance in wet conditions, and the self-centering tapered T-15 Torx screws ensure consistent, repeatable assembly—no guessing whether your scope is straight when you're breaking camp in the dark.
Warne Mountain Tech mounts are built on the principle that every component serves lightweight precision. For hunters running a modern long-range hunting rifle or a traditional Winchester 70 with a quality optic, this base provides the foundation that won't shift and won't weigh you down. If you're serious about the shot when it matters most, the base is where precision starts.
| Manufacturer | Warne Scope Mounts |
| Product Line | Mountain Tech |
| Type | 1-Piece Picatinny Base |
| Material | 7075-T6 Aluminum |
| Finish | Mil-Spec Hardcoat Anodized Matte |
| Hardware | Black Zinc Coated |
| Compatibility | Winchester 70 Long Action |
| Rail Type | Picatinny; Weaver-compatible |
| Fasteners | Self-Centering Tapered T-15 Torx |
Yes—this base is designed specifically for Winchester 70 Long Action receivers with factory drilled-and-tapped holes. Verify your rifle's action length before ordering.
The base accepts any Picatinny-rail rings or Weaver-compatible rings. You'll supply your own scope rings to complete the mounting system.
The finish is matte (non-reflective), which reduces glint and is standard for field hunting rifles.
Warne Mountain Tech uses 7075-T6 aluminum, mil-spec hardcoat anodized finish, and self-centering Torx screws to deliver repeatable zero and corrosion resistance while minimizing weight—essential for backcountry and long-range hunting where every ounce and every shot count.
SKU: 114464498 • Width: 3.3in • Height: 0.7in • Depth: 8.4in • Weight: 0.19oz