Warne Scope Mounts114464378
Warne Maxima Fixed 30mm Rings Matte Medium for CZ550 (19mm Dovetail)$75.99
Availability: In Stock
The Warne Maxima Fixed 1" Rings in Matte finish offer a direct, no-nonsense mounting solution built specifically for the CZ 550 rifle platform. Rather than requiring a separate mounting base, these medium-height rings attach directly to your CZ 550's 19mm dovetail receiver — a design choice that simplifies your setup, reduces part count, and gets you hunting-ready faster. Warne engineered these rings to fit the CZ 550's unique dovetail profile with precision tolerances, so you're not forcing a generic solution onto a fine rifle.
If you're building or upgrading a CZ 550 with a quality scope, these fixed rings deliver solid, repeatable clamping without the complexity of a separate base. The matte finish plays well with modern tactical setups and older-school hunting rigs alike. The CZ-specific recoil pin locks the ring securely into your dovetail, and four T-15 Torx socket cap screws (tightened to 25 in/lb.) handle all the actual scope-to-ring clamping — a durable, time-tested fastening scheme that won't work loose in the field.
Whether you're mounting a scout-style optic, a traditional hunting scope, or something in between, the medium height keeps you in the sweet spot for most CZ 550 configurations. Fixed rings mean no leveling adjustment, so once they're torqued down, you're committed — that trade-off buys you rock-solid dependability and nothing to wear or fail.
| Manufacturer | Warne Scope Mounts |
| Ring Type | Fixed |
| Ring Diameter | 1 inch |
| Height | Medium |
| Finish | Matte |
| Rifle Compatibility | CZ 550 (19mm dovetail) |
| Fastening Method | 4× T-15 Torx socket cap screws |
| Recommended Torque | 25 in/lb. |
| Dovetail Engagement | Integral CZ-specific recoil pin |
Yes. These Warne Maxima rings are machined to fit directly onto the CZ 550's 19mm dovetail receiver. No mounting base is required—the rings attach straight to the rifle.
These are 1" rings, designed to clamp scopes with a 1" tube diameter.
Warne recommends 25 in/lb. of torque on the four T-15 Torx socket cap screws that secure the scope to the rings.
No. These are fixed rings with no leveling or cant adjustment. Once mounted and torqued, they hold your scope in a permanent position relative to your rifle.
SKU: 114461418 • Width: 4.4in • Height: 0.9in • Depth: 5.7in • Weight: 0.44oz
Availability: In Stock
The Warne Maxima Fixed 1" Rings in Matte finish offer a direct, no-nonsense mounting solution built specifically for the CZ 550 rifle platform. Rather than requiring a separate mounting base, these medium-height rings attach directly to your CZ 550's 19mm dovetail receiver — a design choice that simplifies your setup, reduces part count, and gets you hunting-ready faster. Warne engineered these rings to fit the CZ 550's unique dovetail profile with precision tolerances, so you're not forcing a generic solution onto a fine rifle.
If you're building or upgrading a CZ 550 with a quality scope, these fixed rings deliver solid, repeatable clamping without the complexity of a separate base. The matte finish plays well with modern tactical setups and older-school hunting rigs alike. The CZ-specific recoil pin locks the ring securely into your dovetail, and four T-15 Torx socket cap screws (tightened to 25 in/lb.) handle all the actual scope-to-ring clamping — a durable, time-tested fastening scheme that won't work loose in the field.
Whether you're mounting a scout-style optic, a traditional hunting scope, or something in between, the medium height keeps you in the sweet spot for most CZ 550 configurations. Fixed rings mean no leveling adjustment, so once they're torqued down, you're committed — that trade-off buys you rock-solid dependability and nothing to wear or fail.
| Manufacturer | Warne Scope Mounts |
| Ring Type | Fixed |
| Ring Diameter | 1 inch |
| Height | Medium |
| Finish | Matte |
| Rifle Compatibility | CZ 550 (19mm dovetail) |
| Fastening Method | 4× T-15 Torx socket cap screws |
| Recommended Torque | 25 in/lb. |
| Dovetail Engagement | Integral CZ-specific recoil pin |
Yes. These Warne Maxima rings are machined to fit directly onto the CZ 550's 19mm dovetail receiver. No mounting base is required—the rings attach straight to the rifle.
These are 1" rings, designed to clamp scopes with a 1" tube diameter.
Warne recommends 25 in/lb. of torque on the four T-15 Torx socket cap screws that secure the scope to the rings.
No. These are fixed rings with no leveling or cant adjustment. Once mounted and torqued, they hold your scope in a permanent position relative to your rifle.
SKU: 114461418 • Width: 4.4in • Height: 0.9in • Depth: 5.7in • Weight: 0.44oz