Warne Scope Mounts114462627
Warne Maxima 2-Piece Steel Weaver-Style Scope Base for Kimber 8400 Rifles$33.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne Maxima 2 Piece Base Matte for Winchester 70 style rifles is a steel scope mounting solution built on the proven Weaver-pattern design—one of the most durable and adaptable systems in rifle optics. If you're mounting glass on a Winchester 70, Enfield, or compatible rifle with .860 rear hole spacing, these bases deliver the strength and low-profile fit serious shooters expect without the bulk that gets in the way of your irons.
Built tough means built smart. Warne's Maxima bases feature full-width recoil slots in each piece that work with Warne Maxima QD rings to maximize bearing surface where it matters most—under recoil. That engineering translates to rock-solid zero retention and the confidence that comes with knowing your optic is going nowhere. The low-profile footprint also means you can remove your scope and still use your rifle's iron sights without obstruction, a practical edge for hunters and range shooters who value backup aiming options.
Installation is straightforward: the bases mount with Torx-style T-15 socket cap screws secured to 25 in/lb of torque. Matte finish matches the aesthetic of most rifles and resists glare, keeping you focused on the task at hand rather than reflections.
| Brand | Warne Scope Mounts |
| Product | Maxima 2 Piece Base Matte |
| Fit | Winchester 70 style rifles with .860 rear hole spacing |
| Design | Weaver pattern |
| Material | Steel |
| Finish | Matte |
| Mounting Hardware | Torx-style T-15 socket cap screws |
| Recommended Torque | 25 in/lb |
| Piece Count | 2 |
Yes, if your rifle has .860 rear hole spacing. These are specifically designed for Winchester 70 and Enfield style rifles with that dimension. Verify your rifle's hole spacing before purchasing.
Yes. The low-profile design allows you to look over the tops of the bases and use your iron sights when your scope is removed, giving you a backup aiming system.
Warne Maxima QD rings are designed to pair with these bases and take full advantage of the recoil slot design. The rings engage the full-width recoil slots for maximum bearing surface.
The bases mount with Torx-style T-15 socket cap screws. Warne recommends torquing these screws to 25 in/lb. Use an appropriate torque wrench and socket for proper installation.
SKU: 114462344 • Width: 2.1in • Height: 0.6in • Depth: 5.5in • Weight: 0.19oz
Availability: In Stock
The Warne Maxima 2 Piece Base Matte for Winchester 70 style rifles is a steel scope mounting solution built on the proven Weaver-pattern design—one of the most durable and adaptable systems in rifle optics. If you're mounting glass on a Winchester 70, Enfield, or compatible rifle with .860 rear hole spacing, these bases deliver the strength and low-profile fit serious shooters expect without the bulk that gets in the way of your irons.
Built tough means built smart. Warne's Maxima bases feature full-width recoil slots in each piece that work with Warne Maxima QD rings to maximize bearing surface where it matters most—under recoil. That engineering translates to rock-solid zero retention and the confidence that comes with knowing your optic is going nowhere. The low-profile footprint also means you can remove your scope and still use your rifle's iron sights without obstruction, a practical edge for hunters and range shooters who value backup aiming options.
Installation is straightforward: the bases mount with Torx-style T-15 socket cap screws secured to 25 in/lb of torque. Matte finish matches the aesthetic of most rifles and resists glare, keeping you focused on the task at hand rather than reflections.
| Brand | Warne Scope Mounts |
| Product | Maxima 2 Piece Base Matte |
| Fit | Winchester 70 style rifles with .860 rear hole spacing |
| Design | Weaver pattern |
| Material | Steel |
| Finish | Matte |
| Mounting Hardware | Torx-style T-15 socket cap screws |
| Recommended Torque | 25 in/lb |
| Piece Count | 2 |
Yes, if your rifle has .860 rear hole spacing. These are specifically designed for Winchester 70 and Enfield style rifles with that dimension. Verify your rifle's hole spacing before purchasing.
Yes. The low-profile design allows you to look over the tops of the bases and use your iron sights when your scope is removed, giving you a backup aiming system.
Warne Maxima QD rings are designed to pair with these bases and take full advantage of the recoil slot design. The rings engage the full-width recoil slots for maximum bearing surface.
The bases mount with Torx-style T-15 socket cap screws. Warne recommends torquing these screws to 25 in/lb. Use an appropriate torque wrench and socket for proper installation.
SKU: 114462344 • Width: 2.1in • Height: 0.6in • Depth: 5.5in • Weight: 0.19oz