Warne Scope Mounts114462978
Warne 7204M Mountain Tech Ultra High 1" Scope Ring Set for MSR Picatinny/Weaver - Black Anodized Aluminum$141.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne 7217M Mountain Tech Ultra High 30mm scope ring set is engineered for hunters and shooters who refuse to compromise between precision and weight. Built from 7075-T6 aluminum and finished with mil-spec hardcoat anodizing, these Picatinny/Weaver-compatible rings deliver the rigidity needed for long-range accuracy while keeping ounces off your pack—critical when every step counts in the backcountry. The ultra-high configuration suits modern tactical and hunting rifles where scope height and cowitness matter, and the 30mm tube diameter accommodates today's larger-objective hunting and precision optics.
Construction throughout prioritizes durability in the field. Stainless steel hardware resists corrosion from weather and sweat, while the hardcoat anodized aluminum body handles abrasion without sacrificing finish. Mil-spec 65 in/lb. torque spec on the 1/2-inch tactical nuts ensures a rock-solid clamp to your rail—no creep, no shift between shots or season transitions. NATO-STANAG compatibility means these rings work with any true Picatinny or Weaver-profile receiver, rail, or handguard.
Whether you're dialing in a long-range hunting rig, building a competition setup, or mounting glass on an AR platform, the Mountain Tech rings combine lightweight design with the repeatability that separates clean shots from misses. No frills, no marketing fluff—just precision engineering where it matters.
| Tube Diameter | 30mm |
| Ring Height | Ultra High |
| Material | 7075-T6 Aluminum |
| Finish | Black Anodized (Mil-Spec Hardcoat) |
| Hardware | Stainless Steel |
| Picatinny/Weaver Compatible | Yes |
| NATO-STANAG Compatible | Yes |
| Torque Specification | 65 in/lb. |
| Nut Type | 1/2-inch Tactical |
Yes. The Warne 7217M rings fit any Picatinny or Weaver-profile rail, including standard AR receiver tops, picatinny rails, and handguard-mounted systems. They're NATO-STANAG compatible.
These are 30mm rings, designed for scopes with 30mm main tubes. They are not suitable for 1-inch or 34mm tube optics.
Ultra-high rings elevate your scope further above the rail than standard rings. This height works well for modern optics with larger objectives, allows clearance for magnifier rings or backup sights, and can help achieve proper eye relief with certain scope and gun configurations.
Torque the 1/2-inch tactical nuts to 65 in/lb. using a calibrated torque wrench. This mil-spec specification ensures the rings clamp evenly and securely without over-tightening, which can crack aluminum rings or distort scope tubes.
SKU: 114460983 • Width: 5.4in • Height: 1.4in • Depth: 5.7in • Weight: 0.44oz
Availability: In Stock
The Warne 7217M Mountain Tech Ultra High 30mm scope ring set is engineered for hunters and shooters who refuse to compromise between precision and weight. Built from 7075-T6 aluminum and finished with mil-spec hardcoat anodizing, these Picatinny/Weaver-compatible rings deliver the rigidity needed for long-range accuracy while keeping ounces off your pack—critical when every step counts in the backcountry. The ultra-high configuration suits modern tactical and hunting rifles where scope height and cowitness matter, and the 30mm tube diameter accommodates today's larger-objective hunting and precision optics.
Construction throughout prioritizes durability in the field. Stainless steel hardware resists corrosion from weather and sweat, while the hardcoat anodized aluminum body handles abrasion without sacrificing finish. Mil-spec 65 in/lb. torque spec on the 1/2-inch tactical nuts ensures a rock-solid clamp to your rail—no creep, no shift between shots or season transitions. NATO-STANAG compatibility means these rings work with any true Picatinny or Weaver-profile receiver, rail, or handguard.
Whether you're dialing in a long-range hunting rig, building a competition setup, or mounting glass on an AR platform, the Mountain Tech rings combine lightweight design with the repeatability that separates clean shots from misses. No frills, no marketing fluff—just precision engineering where it matters.
| Tube Diameter | 30mm |
| Ring Height | Ultra High |
| Material | 7075-T6 Aluminum |
| Finish | Black Anodized (Mil-Spec Hardcoat) |
| Hardware | Stainless Steel |
| Picatinny/Weaver Compatible | Yes |
| NATO-STANAG Compatible | Yes |
| Torque Specification | 65 in/lb. |
| Nut Type | 1/2-inch Tactical |
Yes. The Warne 7217M rings fit any Picatinny or Weaver-profile rail, including standard AR receiver tops, picatinny rails, and handguard-mounted systems. They're NATO-STANAG compatible.
These are 30mm rings, designed for scopes with 30mm main tubes. They are not suitable for 1-inch or 34mm tube optics.
Ultra-high rings elevate your scope further above the rail than standard rings. This height works well for modern optics with larger objectives, allows clearance for magnifier rings or backup sights, and can help achieve proper eye relief with certain scope and gun configurations.
Torque the 1/2-inch tactical nuts to 65 in/lb. using a calibrated torque wrench. This mil-spec specification ensures the rings clamp evenly and securely without over-tightening, which can crack aluminum rings or distort scope tubes.
SKU: 114460983 • Width: 5.4in • Height: 1.4in • Depth: 5.7in • Weight: 0.44oz