Warne Scope Mounts114462165
Warne 7242M Mountain Tech 35mm High Scope Ring Set for Picatinny/Weaver - Black Anodized Aluminum$159.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne 7202M Mountain Tech High Scope Ring Set brings serious engineering to your rifle's optics platform without the weight penalty of steel. These one-inch tube rings are CNC machined from 7075-T6 aluminum—a material choice that cuts roughly 60 percent off the heft you'd carry with conventional steel rings while preserving the clamping rigidity that Warne has built its reputation on. Whether you're glassing a ridge at elevation, setting up for a long-range hunt, or dialing in at the bench, these lightweight aluminum scope rings deliver the secure, repeatable hold your scope needs.
Built to handle Picatinny and Weaver rails—including NATO-STANAG compatibility—the 7202M offers genuine flexibility across most modern tactical and hunting platforms. The high ring height is engineered to clear larger objective lenses and turrets, making these rings a natural fit for scope-heavy setups where clearance matters. Black anodized aluminum construction resists wear and corrosion, while black oxide-coated stainless steel hardware adds another layer of durability. The 1/2" tactical nut design locks firmly to your rail without fuss, and each ring is torqued to Mil-Spec 65 in/lbs for consistent, predictable performance shot after shot.
If you're building a rifle where every ounce counts—whether that's a mountain hunter who measures elevation gain or an overlander stacking gear for weeks in the backcountry—the Mountain Tech line rewrites the weight-versus-strength equation. Warne doesn't skimp on materials or machining; these rings simply prove that aluminum done right beats steel when it comes to the balance sheet between durability and pack weight.
| Ring Diameter | 1 inch |
| Height | High |
| Rail Compatibility | Picatinny and Weaver |
| Material | 7075-T6 aluminum (rings); black oxide-coated stainless steel (hardware) |
| Finish | Black anodized aluminum, Mil-Spec hard coat |
| Attachment Style | 1/2" tactical nut |
| Torque Specification | Mil-Spec 65 in/lb |
| NATO Compatibility | NATO-STANAG compatible |
The Warne 7202M is designed for one-inch tube scopes. Warne also makes the Mountain Tech line in 30mm and 34mm sizes if you're running a larger tube.
Yes. The 7202M is compatible with both Picatinny and Weaver-style rails, and it meets NATO-STANAG standards, so it will fit the vast majority of modern rifle platforms.
The aluminum construction of the Mountain Tech line is approximately 60 percent lighter than equivalent steel rings, making it an excellent choice for hunters and shooters who prioritize reducing overall rifle weight.
These are high-height rings, designed to provide superior clearance for scopes with large objective lenses or elevated turret systems. If you're unsure whether high rings are right for your specific scope and rifle combo, measure your objective bell diameter and check for turret interference before ordering.
SKU: 114461148 • Width: 5.4in • Height: 1.6in • Depth: 5.9in • Weight: 0.38oz
Availability: In Stock
The Warne 7202M Mountain Tech High Scope Ring Set brings serious engineering to your rifle's optics platform without the weight penalty of steel. These one-inch tube rings are CNC machined from 7075-T6 aluminum—a material choice that cuts roughly 60 percent off the heft you'd carry with conventional steel rings while preserving the clamping rigidity that Warne has built its reputation on. Whether you're glassing a ridge at elevation, setting up for a long-range hunt, or dialing in at the bench, these lightweight aluminum scope rings deliver the secure, repeatable hold your scope needs.
Built to handle Picatinny and Weaver rails—including NATO-STANAG compatibility—the 7202M offers genuine flexibility across most modern tactical and hunting platforms. The high ring height is engineered to clear larger objective lenses and turrets, making these rings a natural fit for scope-heavy setups where clearance matters. Black anodized aluminum construction resists wear and corrosion, while black oxide-coated stainless steel hardware adds another layer of durability. The 1/2" tactical nut design locks firmly to your rail without fuss, and each ring is torqued to Mil-Spec 65 in/lbs for consistent, predictable performance shot after shot.
If you're building a rifle where every ounce counts—whether that's a mountain hunter who measures elevation gain or an overlander stacking gear for weeks in the backcountry—the Mountain Tech line rewrites the weight-versus-strength equation. Warne doesn't skimp on materials or machining; these rings simply prove that aluminum done right beats steel when it comes to the balance sheet between durability and pack weight.
| Ring Diameter | 1 inch |
| Height | High |
| Rail Compatibility | Picatinny and Weaver |
| Material | 7075-T6 aluminum (rings); black oxide-coated stainless steel (hardware) |
| Finish | Black anodized aluminum, Mil-Spec hard coat |
| Attachment Style | 1/2" tactical nut |
| Torque Specification | Mil-Spec 65 in/lb |
| NATO Compatibility | NATO-STANAG compatible |
The Warne 7202M is designed for one-inch tube scopes. Warne also makes the Mountain Tech line in 30mm and 34mm sizes if you're running a larger tube.
Yes. The 7202M is compatible with both Picatinny and Weaver-style rails, and it meets NATO-STANAG standards, so it will fit the vast majority of modern rifle platforms.
The aluminum construction of the Mountain Tech line is approximately 60 percent lighter than equivalent steel rings, making it an excellent choice for hunters and shooters who prioritize reducing overall rifle weight.
These are high-height rings, designed to provide superior clearance for scopes with large objective lenses or elevated turret systems. If you're unsure whether high rings are right for your specific scope and rifle combo, measure your objective bell diameter and check for turret interference before ordering.
SKU: 114461148 • Width: 5.4in • Height: 1.6in • Depth: 5.9in • Weight: 0.38oz