Warne Scope Mounts114463399
Warne 7240M Mountain Tech Low 35mm Scope Ring Set for Rifle Picatinny/Weaver - Black Anodized Aluminum$159.99
Availability: In Stock
The Warne 7200M Mountain Tech Low 1" scope ring set brings serious weight savings to long-range rifle builds without compromising strength or precision. Built for hunters and shooters who count every ounce—whether you're glassing from a ridge at 10,000 feet or running a dedicated precision rifle at the range—these rings deliver the rigidity you need to keep zero solid while keeping your total system weight down. The low height profile works with modern optics and rifle geometry on AR-pattern, bolt-action, and other Picatinny or Weaver-railed systems.
Construction starts with 7075-T6 aluminum, a material choice that balances strength with minimal mass. All fasteners are stainless steel, so salt air, rain, and seasonal weather won't cause rust or corrosion issues. The mil-spec hardcoat anodizing adds a tough, abrasion-resistant finish that protects against the bumps and scuffs that come with field use. These aren't just pretty—they're built to survive.
The rings use mil-spec 65 in/lb. torque-spec 1/2" tactical nuts that clamp directly to Picatinny or Weaver rails with genuine locking authority. NATO-STANAG compatibility means they'll mate with any standard rail system you're running. Installation is straightforward with common gunsmithing tools, and once torqued properly, they stay put through recoil, temperature swings, and rough handling.
If your hunting or shooting setup demands reliability without excess weight, or if you're building a precision rifle where ounces matter, the Mountain Tech rings deliver proven performance in a lightweight package.
| Product Name | Warne 7200M Mountain Tech Low 1" Scope Ring Set |
| Brand | Warne Scope Mounts |
| Ring Diameter | 1 inch |
| Height | Low |
| Material | 7075-T6 aluminum |
| Finish | Mil-spec hardcoat anodized (black) |
| Hardware | Stainless steel |
| Rail Compatibility | Picatinny and Weaver |
| Tactical Nut Size | 1/2 inch |
| Torque Specification | 65 in/lb. (mil-spec) |
| NATO Compatibility | NATO-STANAG compatible |
The Warne 7200M works with both Picatinny and Weaver rail systems, and they are NATO-STANAG compatible. They attach via 1/2" tactical nuts that clamp directly to the rail.
Yes. The Mountain Tech rings are purpose-built for backcountry hunting and field use. The lightweight 7075-T6 aluminum construction helps reduce overall rifle weight, while stainless steel hardware and mil-spec anodizing provide weather resistance and durability for harsh conditions.
The rings use a mil-spec torque specification of 65 in/lb. for the 1/2" tactical nut attachments. Proper torquing is important for maintaining zero and ring security.
Yes, the 1" ring diameter fits standard 1-inch scope tubes. The low profile height is designed for modern rifle geometry and optics systems, making them suitable for AR-platform rifles, bolt guns, and other Picatinny- or Weaver-railed firearms.
SKU: 114461294 • Width: 4.5in • Height: 1.5in • Depth: 4.5in • Weight: 0.31oz
Availability: In Stock
The Warne 7200M Mountain Tech Low 1" scope ring set brings serious weight savings to long-range rifle builds without compromising strength or precision. Built for hunters and shooters who count every ounce—whether you're glassing from a ridge at 10,000 feet or running a dedicated precision rifle at the range—these rings deliver the rigidity you need to keep zero solid while keeping your total system weight down. The low height profile works with modern optics and rifle geometry on AR-pattern, bolt-action, and other Picatinny or Weaver-railed systems.
Construction starts with 7075-T6 aluminum, a material choice that balances strength with minimal mass. All fasteners are stainless steel, so salt air, rain, and seasonal weather won't cause rust or corrosion issues. The mil-spec hardcoat anodizing adds a tough, abrasion-resistant finish that protects against the bumps and scuffs that come with field use. These aren't just pretty—they're built to survive.
The rings use mil-spec 65 in/lb. torque-spec 1/2" tactical nuts that clamp directly to Picatinny or Weaver rails with genuine locking authority. NATO-STANAG compatibility means they'll mate with any standard rail system you're running. Installation is straightforward with common gunsmithing tools, and once torqued properly, they stay put through recoil, temperature swings, and rough handling.
If your hunting or shooting setup demands reliability without excess weight, or if you're building a precision rifle where ounces matter, the Mountain Tech rings deliver proven performance in a lightweight package.
| Product Name | Warne 7200M Mountain Tech Low 1" Scope Ring Set |
| Brand | Warne Scope Mounts |
| Ring Diameter | 1 inch |
| Height | Low |
| Material | 7075-T6 aluminum |
| Finish | Mil-spec hardcoat anodized (black) |
| Hardware | Stainless steel |
| Rail Compatibility | Picatinny and Weaver |
| Tactical Nut Size | 1/2 inch |
| Torque Specification | 65 in/lb. (mil-spec) |
| NATO Compatibility | NATO-STANAG compatible |
The Warne 7200M works with both Picatinny and Weaver rail systems, and they are NATO-STANAG compatible. They attach via 1/2" tactical nuts that clamp directly to the rail.
Yes. The Mountain Tech rings are purpose-built for backcountry hunting and field use. The lightweight 7075-T6 aluminum construction helps reduce overall rifle weight, while stainless steel hardware and mil-spec anodizing provide weather resistance and durability for harsh conditions.
The rings use a mil-spec torque specification of 65 in/lb. for the 1/2" tactical nut attachments. Proper torquing is important for maintaining zero and ring security.
Yes, the 1" ring diameter fits standard 1-inch scope tubes. The low profile height is designed for modern rifle geometry and optics systems, making them suitable for AR-platform rifles, bolt guns, and other Picatinny- or Weaver-railed firearms.
SKU: 114461294 • Width: 4.5in • Height: 1.5in • Depth: 4.5in • Weight: 0.31oz