Warne Scope Mounts144597536
Warne 6110Ml Red-Dot Riser 45 Degree Offset Reflex Black Anodized Left Hand$55.99
Loading...
Loading...
Loading...
Availability: In Stock
The Warne 6110MR is a 45-degree offset red dot riser mount built for right-hand shooters who want to run a reflex sight alongside a primary rifle scope without losing sight radius or dealing with sight obstruction. If you're running a magnified optic on a flat-top rail and need a cowitness solution that doesn't interfere with your scope's eyepiece or turrets, this aluminum mount positions your dot sight at an angle that supports fast target transitions while keeping your setup clean and balanced.
The real advantage here is compatibility. Rather than buying optic-specific mounts for every red dot platform, Warne engineered the 6110MR to accept a wide range of reflex sight footprints. Whether you're mounting a Sig Romeo 3, Holosun 507c/407c, Vortex Viper or Razor, Doctor sight, or any number of other common patterns, the modular design lets you swap optics without replacing the base. The riser itself is machined aluminum with a durable black anodized finish that matches modern rifle aesthetics and stands up to field use.
Height and angle are critical to usability, and Warne positioned this mount to let you get behind your primary scope while maintaining a repeatable, ergonomic sight picture on the dot. Built in the USA, the 6110MR pairs a robust mounting base with a top engineered for the specific reflex patterns it supports. It's the kind of thoughtful design that saves you frustration when you're trying to run dual optics on a rifle without compromise.
| Mount Type | 45-degree offset reflex sight riser |
| Hand Orientation | Right hand |
| Material | Anodized aluminum |
| Finish | Black anodized |
| Compatibility | Burris FastFire 2 & 3 (with included hardware), C-More RTS & STS, Doctor, EOTech MRDS, Holosun 507c/407c V1 & V2, Insight MRDS, Leupold Delta Point & Delta Point Pro, Shield RMS, Sig Romeo 3/3 Max/3 XL, Trijicon RMR, TrueGlo UTG Reflex Micro Dot, Vortex Razor/Venom/Viper, and others with compatible mounting patterns |
| Manufacture | USA |
The 6110MR is designed to accommodate most popular reflex sight mounting patterns, including Sig Romeo 3 (all versions), Holosun 507c/407c, Vortex Viper/Razor/Venom, Doctor sights, Trijicon RMR, Burris FastFire, and many others that share the same footprint hole pattern. Burris FastFire 2 & 3 require included hardware for installation.
Yes. The 45-degree offset design is specifically engineered to position your reflex sight alongside a magnified optic. The height and angle keep the red dot clear of your scope's eyepiece and turret adjustments, allowing you to maintain a repeatable sight picture through the scope while having quick access to the dot for close-quarters or transitional shots.
No. The 6110MR is designed for right-hand and right-eye-dominant shooters. If you need a left-hand offset option, contact us to discuss alternatives.
The 6110MR includes the anodized aluminum riser base and mounting hardware. If you're installing a Burris FastFire 2 or 3, the necessary adapter hardware is included in the box.
SKU: 144605344 • Width: 4.7in • Height: 1.2in • Depth: 6.4in • Weight: 0.17oz
Availability: In Stock
The Warne 6110MR is a 45-degree offset red dot riser mount built for right-hand shooters who want to run a reflex sight alongside a primary rifle scope without losing sight radius or dealing with sight obstruction. If you're running a magnified optic on a flat-top rail and need a cowitness solution that doesn't interfere with your scope's eyepiece or turrets, this aluminum mount positions your dot sight at an angle that supports fast target transitions while keeping your setup clean and balanced.
The real advantage here is compatibility. Rather than buying optic-specific mounts for every red dot platform, Warne engineered the 6110MR to accept a wide range of reflex sight footprints. Whether you're mounting a Sig Romeo 3, Holosun 507c/407c, Vortex Viper or Razor, Doctor sight, or any number of other common patterns, the modular design lets you swap optics without replacing the base. The riser itself is machined aluminum with a durable black anodized finish that matches modern rifle aesthetics and stands up to field use.
Height and angle are critical to usability, and Warne positioned this mount to let you get behind your primary scope while maintaining a repeatable, ergonomic sight picture on the dot. Built in the USA, the 6110MR pairs a robust mounting base with a top engineered for the specific reflex patterns it supports. It's the kind of thoughtful design that saves you frustration when you're trying to run dual optics on a rifle without compromise.
| Mount Type | 45-degree offset reflex sight riser |
| Hand Orientation | Right hand |
| Material | Anodized aluminum |
| Finish | Black anodized |
| Compatibility | Burris FastFire 2 & 3 (with included hardware), C-More RTS & STS, Doctor, EOTech MRDS, Holosun 507c/407c V1 & V2, Insight MRDS, Leupold Delta Point & Delta Point Pro, Shield RMS, Sig Romeo 3/3 Max/3 XL, Trijicon RMR, TrueGlo UTG Reflex Micro Dot, Vortex Razor/Venom/Viper, and others with compatible mounting patterns |
| Manufacture | USA |
The 6110MR is designed to accommodate most popular reflex sight mounting patterns, including Sig Romeo 3 (all versions), Holosun 507c/407c, Vortex Viper/Razor/Venom, Doctor sights, Trijicon RMR, Burris FastFire, and many others that share the same footprint hole pattern. Burris FastFire 2 & 3 require included hardware for installation.
Yes. The 45-degree offset design is specifically engineered to position your reflex sight alongside a magnified optic. The height and angle keep the red dot clear of your scope's eyepiece and turret adjustments, allowing you to maintain a repeatable sight picture through the scope while having quick access to the dot for close-quarters or transitional shots.
No. The 6110MR is designed for right-hand and right-eye-dominant shooters. If you need a left-hand offset option, contact us to discuss alternatives.
The 6110MR includes the anodized aluminum riser base and mounting hardware. If you're installing a Burris FastFire 2 or 3, the necessary adapter hardware is included in the box.
SKU: 144605344 • Width: 4.7in • Height: 1.2in • Depth: 6.4in • Weight: 0.17oz