Warne Scope Mounts114464701
Warne 213M Maxima Low 30mm Rifle Scope Rings - Matte Black Steel for Weaver/Picatinny Rails$62.39
Availability: In Stock
The Warne 513M Maxima 30mm scope rings are a solid choice for hunters and shooters who want proven, no-nonsense optics mounting. These horizontal fixed rings fit standard 30mm scope tubes and work with both Weaver and Picatinny rail systems, making them adaptable to most modern rifle platforms. Built from sintered steel and finished in matte black, they're engineered to hold zero shot after shot without the fuss of adjustable systems.
Warne designed and manufactures the Maxima line in-house at their Oregon facility, and it shows in the build quality. Each ring uses four Torx T-15 cap screws—two per clamp—to lock your scope down with confidence. The permanent recoil keys are squared off for positive engagement between the ring and base, a detail that matters when you're counting on consistency. The STANAG 4694 interface standard enhances rigidity and supports Warne's return to zero guarantee, so if you ever need to remount or service your optic, it should settle back into the same point of aim.
Installation is straightforward: the four-screw cap design and integrated clamp system make setup faster than some competing rings. If you're building a hunting rifle, running a precision bolt gun, or setting up a tactical platform, the Maxima 513M delivers the holding strength and repeatability that serious shooters expect. Warne's reputation for domestic manufacturing and attention to detail is reflected in every detail of these rings.
| Brand | Warne Scope Mounts |
| Model | 513M Maxima |
| Scope Tube Diameter | 30mm |
| Mount Type | Horizontal fixed rings |
| Rail Compatibility | Weaver and Picatinny |
| Material | Sintered steel |
| Finish | Matte black |
| Fastener Type | Torx T-15 cap screws (4 total) |
| Recoil Key Design | Permanent, square engagement |
| Interface Standard | STANAG 4694 |
| Manufactured In | USA |
Yes. The 513M rings are designed to fit both Weaver and Picatinny style bases, so they'll secure to either system without adapters.
The 513M Maxima rings are built for 30mm scope tubes.
The rings use Torx T-15 cap screws. While no specific torque spec is provided in the available data, follow any torque recommendations included with your rings or consult Warne's documentation to avoid over-tightening and damaging the scope tube.
Warne backs the Maxima 513M with a return to zero guarantee, meaning your scope should return to the same point of aim if the rings are remounted on the same base.
SKU: 114461098 • Width: 5.4in • Height: 1.6in • Depth: 5.6in • Weight: 0.44oz
Availability: In Stock
The Warne 513M Maxima 30mm scope rings are a solid choice for hunters and shooters who want proven, no-nonsense optics mounting. These horizontal fixed rings fit standard 30mm scope tubes and work with both Weaver and Picatinny rail systems, making them adaptable to most modern rifle platforms. Built from sintered steel and finished in matte black, they're engineered to hold zero shot after shot without the fuss of adjustable systems.
Warne designed and manufactures the Maxima line in-house at their Oregon facility, and it shows in the build quality. Each ring uses four Torx T-15 cap screws—two per clamp—to lock your scope down with confidence. The permanent recoil keys are squared off for positive engagement between the ring and base, a detail that matters when you're counting on consistency. The STANAG 4694 interface standard enhances rigidity and supports Warne's return to zero guarantee, so if you ever need to remount or service your optic, it should settle back into the same point of aim.
Installation is straightforward: the four-screw cap design and integrated clamp system make setup faster than some competing rings. If you're building a hunting rifle, running a precision bolt gun, or setting up a tactical platform, the Maxima 513M delivers the holding strength and repeatability that serious shooters expect. Warne's reputation for domestic manufacturing and attention to detail is reflected in every detail of these rings.
| Brand | Warne Scope Mounts |
| Model | 513M Maxima |
| Scope Tube Diameter | 30mm |
| Mount Type | Horizontal fixed rings |
| Rail Compatibility | Weaver and Picatinny |
| Material | Sintered steel |
| Finish | Matte black |
| Fastener Type | Torx T-15 cap screws (4 total) |
| Recoil Key Design | Permanent, square engagement |
| Interface Standard | STANAG 4694 |
| Manufactured In | USA |
Yes. The 513M rings are designed to fit both Weaver and Picatinny style bases, so they'll secure to either system without adapters.
The 513M Maxima rings are built for 30mm scope tubes.
The rings use Torx T-15 cap screws. While no specific torque spec is provided in the available data, follow any torque recommendations included with your rings or consult Warne's documentation to avoid over-tightening and damaging the scope tube.
Warne backs the Maxima 513M with a return to zero guarantee, meaning your scope should return to the same point of aim if the rings are remounted on the same base.
SKU: 114461098 • Width: 5.4in • Height: 1.6in • Depth: 5.6in • Weight: 0.44oz