AeroPrecision115670878
VG6 Precision Gamma 300 BLK Muzzle Brake 7.62mm 5/8"-24 Thread Stainless Steel$80.99
Availability: In Stock
Current Stock: Out of stock
The VG6 Precision Lambda PRS 30 muzzle brake is a precision-engineered recoil reduction system built for shooters who need to stay behind the scope and call their shots downrange. Chambered for .30 caliber rifles up to .300 Win Mag and threaded 5/8"-24, this two-piece design combines simplicity with serious performance—no tools required for installation. The jam nut self-tightens with every shot, keeping everything secure without extra hardware or fastegging.
What sets the Lambda PRS 30 apart is its four-chamber design and 11° target crown, engineered using computational fluid dynamics to manage gas flow strategically. The first chamber vents gas equally left and right, keeping concussion off the shooter while the three rear chambers redirect gas backward to work as a recoil buffer. The result is dramatically reduced muzzle rise and recoil impulse, letting you track impacts and make fast follow-up shots from prone or bench.
Built from 17-4PH heat-treated stainless steel and finished in Blacknitride satin, the Lambda PRS 30 is tough enough for serious competition and field use. Every component is CNC machined to tight tolerances, and at 4.8 ounces, it adds minimal weight to your setup. Whether you're tuning a long-range PRS rifle, building a .300 Win Mag hunting rig, or setting up a precision 7.62 bolt gun, this brake delivers the recoil management and accuracy hold needed to shoot better groups and faster splits.
| Caliber | .30 cal (.300 Win Mag and below) |
| Thread Pattern | 5/8"-24 RH |
| Material | 17-4PH heat-treated stainless steel |
| Finish | Blacknitride satin (68RC surface hardness) |
| Weight | 4.8 oz |
| Design | Two-piece with jam nut; four-chamber configuration |
| Installation | Tool-less; jam nut self-tightens |
The Lambda PRS 30 is designed for .30 caliber rifles chambered in .300 Win Mag and smaller cartridges. It has a 5/8"-24 right-hand thread, so your barrel must be cut to that specification. Always verify thread compatibility with your rifle or gunsmith before purchase.
The four-chamber design and backward-directed gas management significantly reduce recoil and muzzle rise, allowing shooters to stay behind the scope and track impacts. The exact reduction depends on your rifle's recoil profile, load, and barrel length, but the design is optimized for precision shooting where follow-up shot capability matters.
No. The two-piece design features tool-less installation. The jam nut included with the brake self-tightens with each shot, eliminating the need for wrenches or rocksett—just thread it on and shoot.
The 11° target crown is engineered to protect your barrel crown from damage and support consistency in bullet release. It's a feature built into the brake specifically for precision rifle work.
SKU: 115785601 • Width: 3.8in • Height: 1.5in • Depth: 7.3in • Weight: 0.38oz
Availability: In Stock
Current Stock: Out of stock
The VG6 Precision Lambda PRS 30 muzzle brake is a precision-engineered recoil reduction system built for shooters who need to stay behind the scope and call their shots downrange. Chambered for .30 caliber rifles up to .300 Win Mag and threaded 5/8"-24, this two-piece design combines simplicity with serious performance—no tools required for installation. The jam nut self-tightens with every shot, keeping everything secure without extra hardware or fastegging.
What sets the Lambda PRS 30 apart is its four-chamber design and 11° target crown, engineered using computational fluid dynamics to manage gas flow strategically. The first chamber vents gas equally left and right, keeping concussion off the shooter while the three rear chambers redirect gas backward to work as a recoil buffer. The result is dramatically reduced muzzle rise and recoil impulse, letting you track impacts and make fast follow-up shots from prone or bench.
Built from 17-4PH heat-treated stainless steel and finished in Blacknitride satin, the Lambda PRS 30 is tough enough for serious competition and field use. Every component is CNC machined to tight tolerances, and at 4.8 ounces, it adds minimal weight to your setup. Whether you're tuning a long-range PRS rifle, building a .300 Win Mag hunting rig, or setting up a precision 7.62 bolt gun, this brake delivers the recoil management and accuracy hold needed to shoot better groups and faster splits.
| Caliber | .30 cal (.300 Win Mag and below) |
| Thread Pattern | 5/8"-24 RH |
| Material | 17-4PH heat-treated stainless steel |
| Finish | Blacknitride satin (68RC surface hardness) |
| Weight | 4.8 oz |
| Design | Two-piece with jam nut; four-chamber configuration |
| Installation | Tool-less; jam nut self-tightens |
The Lambda PRS 30 is designed for .30 caliber rifles chambered in .300 Win Mag and smaller cartridges. It has a 5/8"-24 right-hand thread, so your barrel must be cut to that specification. Always verify thread compatibility with your rifle or gunsmith before purchase.
The four-chamber design and backward-directed gas management significantly reduce recoil and muzzle rise, allowing shooters to stay behind the scope and track impacts. The exact reduction depends on your rifle's recoil profile, load, and barrel length, but the design is optimized for precision shooting where follow-up shot capability matters.
No. The two-piece design features tool-less installation. The jam nut included with the brake self-tightens with each shot, eliminating the need for wrenches or rocksett—just thread it on and shoot.
The 11° target crown is engineered to protect your barrel crown from damage and support consistency in bullet release. It's a feature built into the brake specifically for precision rifle work.
SKU: 115785601 • Width: 3.8in • Height: 1.5in • Depth: 7.3in • Weight: 0.38oz