Tyrant Cnc144599094
Tyrant Cnc Tdhcattdlblk Takedown Lever Black Springfield Hellcat Pro$31.46
Loading...
Loading...
Loading...
Availability: In Stock
The Tyrant CNC Takedown Lever for Springfield Hellcat Pro is a precision-machined upgrade that transforms one of the smallest carry pistols' most-used control. If you run a Hellcat or Hellcat Pro and find the factory lever a bit slippery or stubborn when you're breaking down your gun for cleaning or maintenance, this grey steel replacement addresses both the ergonomics and durability of the original design.
Built from 17-4 stainless steel and finished with a bead-blast and PVD (Physical Vapor Deposition) coating, this lever is engineered to resist corrosion and wear far longer than the factory part. The real upgrade, though, is in the handling. Tyrant CNC increased the surface area and added vertical serrations that give your thumb or finger actual purchase—especially helpful when you're manipulating the lever under stress or with a firm grip. They also refined the radius geometry to smooth out the takedown stroke, so the lever moves without binding or feeling rough.
Because the Hellcat Pro is purpose-built for carry, Tyrant CNC kept compatibility in mind. Despite the larger, more textured profile, this lever works with standard OWB and IWB holsters, so you won't need to rethink your carry setup. It's the kind of modest but solid refinement that pays off every time you field-strip your gun—better control, better durability, zero hassle.
| Brand | Tyrant CNC |
| Component | Takedown Lever |
| Material | 17-4 Stainless Steel |
| Finish | Bead-blasted + PVD (Physical Vapor Deposition) |
| Color | Grey |
| Compatibility | Springfield Hellcat, Hellcat Pro, Hellcat RDP, and Hellcat series |
| Holster Compatibility | Most OWB and IWB holsters |
Yes. This Tyrant CNC lever is designed for all Springfield Armory Hellcat series firearms, including the Hellcat Pro, Hellcat, Hellcat RDP, and other variants in the line.
Most likely. Despite its larger surface area and enhanced profile, Tyrant CNC engineered it to work with standard OWB (outside the waistband) and IWB (inside the waistband) holsters. If you're using a custom or tight-fitting holster, verify fit before carry.
The factory Hellcat lever can feel slippery and stiff. This upgrade offers a 2x larger surface, vertical serrations for grip, and a polished radius that smooths the takedown stroke. The 17-4 stainless steel with PVD coating also outlasts the standard finish, resisting corrosion and wear far better over time.
It's constructed from 17-4 stainless steel, then bead-blasted for a uniform matte appearance, and topped with a PVD (Physical Vapor Deposition) coating for added durability and corrosion resistance.
SKU: 167513675 • Width: 4in • Height: 0.3in • Depth: 4.7in • Weight: 0.015oz
Availability: In Stock
The Tyrant CNC Takedown Lever for Springfield Hellcat Pro is a precision-machined upgrade that transforms one of the smallest carry pistols' most-used control. If you run a Hellcat or Hellcat Pro and find the factory lever a bit slippery or stubborn when you're breaking down your gun for cleaning or maintenance, this grey steel replacement addresses both the ergonomics and durability of the original design.
Built from 17-4 stainless steel and finished with a bead-blast and PVD (Physical Vapor Deposition) coating, this lever is engineered to resist corrosion and wear far longer than the factory part. The real upgrade, though, is in the handling. Tyrant CNC increased the surface area and added vertical serrations that give your thumb or finger actual purchase—especially helpful when you're manipulating the lever under stress or with a firm grip. They also refined the radius geometry to smooth out the takedown stroke, so the lever moves without binding or feeling rough.
Because the Hellcat Pro is purpose-built for carry, Tyrant CNC kept compatibility in mind. Despite the larger, more textured profile, this lever works with standard OWB and IWB holsters, so you won't need to rethink your carry setup. It's the kind of modest but solid refinement that pays off every time you field-strip your gun—better control, better durability, zero hassle.
| Brand | Tyrant CNC |
| Component | Takedown Lever |
| Material | 17-4 Stainless Steel |
| Finish | Bead-blasted + PVD (Physical Vapor Deposition) |
| Color | Grey |
| Compatibility | Springfield Hellcat, Hellcat Pro, Hellcat RDP, and Hellcat series |
| Holster Compatibility | Most OWB and IWB holsters |
Yes. This Tyrant CNC lever is designed for all Springfield Armory Hellcat series firearms, including the Hellcat Pro, Hellcat, Hellcat RDP, and other variants in the line.
Most likely. Despite its larger surface area and enhanced profile, Tyrant CNC engineered it to work with standard OWB (outside the waistband) and IWB (inside the waistband) holsters. If you're using a custom or tight-fitting holster, verify fit before carry.
The factory Hellcat lever can feel slippery and stiff. This upgrade offers a 2x larger surface, vertical serrations for grip, and a polished radius that smooths the takedown stroke. The 17-4 stainless steel with PVD coating also outlasts the standard finish, resisting corrosion and wear far better over time.
It's constructed from 17-4 stainless steel, then bead-blasted for a uniform matte appearance, and topped with a PVD (Physical Vapor Deposition) coating for added durability and corrosion resistance.
SKU: 167513675 • Width: 4in • Height: 0.3in • Depth: 4.7in • Weight: 0.015oz