Tyrant Cnc144600234
Tyrant Cnc Tdhcategrey Mag Release Springfield Hellcat Pro Gray$29.66
Availability: In Stock
The Tyrant CNC Hellcat mag release for Springfield Armory Hellcat and Hellcat Pro pistols is a purpose-built upgrade that transforms how you interact with your carry gun. This extended magazine release gives you a larger, more accessible paddle—roughly 1.95mm higher than the factory part—making magazine drops faster and more intuitive under stress or during rapid reloads at the range.
Built from 7075 aerospace-grade aluminum and finished with a bead-blasted, anodized surface, the Tyrant CNC release is engineered to handle repeated cycles without premature wear. The material composition resists degradation from constant contact with steel magazines, a common failure point in lesser aftermarket releases. Tactical serrations cut into the extended surface improve grip and control, whether you're running competitions, defensive drills, or just want a more refined feel than the factory polymer.
Ambidextrous design means you can flip the release 180 degrees to operate from either side of the frame—critical for left-handed shooters or those training both-hands-on transitions. The black anodized finish blends seamlessly with the Hellcat platform while the precision CNC machining ensures a tight, rattle-free fit. If you're carrying a Hellcat or Hellcat Pro and want your mag changes to be as smooth and deliberate as the rest of your trigger press, this is the upgrade worth making.
| Material | 7075 Aerospace-Grade Aluminum |
| Finish | Black Anodized, Bead Blasted |
| Extension Height | ~1.95mm raised surface |
| Ambidextrous | Yes (180-degree reversible) |
| Compatibility | Springfield Armory Hellcat, Springfield Armory Hellcat Pro |
Yes. The Tyrant CNC extended mag release is designed to fit both the Springfield Armory Hellcat and Hellcat Pro models.
Absolutely. The release is fully ambidextrous—you can flip it 180 degrees to operate from either the right or left side of the frame, making it ideal for left-handed shooters or training both-hands operation.
The raised surface (approximately 1.95mm higher than factory) gives you more real estate to press with your thumb or trigger finger, allowing faster, more reliable magazine drops—especially useful during high-stress drills or competitions.
Tyrant CNC machines this from 7075 aerospace-grade aluminum, a material with composition and hardness similar to steel. It's designed to resist the wear that comes from repeated contact with steel magazines, potentially outlasting lesser aluminum alternatives.
SKU: 144597738 • Width: 4in • Height: 0.3in • Depth: 4.5in • Weight: 0.015oz
Availability: In Stock
The Tyrant CNC Hellcat mag release for Springfield Armory Hellcat and Hellcat Pro pistols is a purpose-built upgrade that transforms how you interact with your carry gun. This extended magazine release gives you a larger, more accessible paddle—roughly 1.95mm higher than the factory part—making magazine drops faster and more intuitive under stress or during rapid reloads at the range.
Built from 7075 aerospace-grade aluminum and finished with a bead-blasted, anodized surface, the Tyrant CNC release is engineered to handle repeated cycles without premature wear. The material composition resists degradation from constant contact with steel magazines, a common failure point in lesser aftermarket releases. Tactical serrations cut into the extended surface improve grip and control, whether you're running competitions, defensive drills, or just want a more refined feel than the factory polymer.
Ambidextrous design means you can flip the release 180 degrees to operate from either side of the frame—critical for left-handed shooters or those training both-hands-on transitions. The black anodized finish blends seamlessly with the Hellcat platform while the precision CNC machining ensures a tight, rattle-free fit. If you're carrying a Hellcat or Hellcat Pro and want your mag changes to be as smooth and deliberate as the rest of your trigger press, this is the upgrade worth making.
| Material | 7075 Aerospace-Grade Aluminum |
| Finish | Black Anodized, Bead Blasted |
| Extension Height | ~1.95mm raised surface |
| Ambidextrous | Yes (180-degree reversible) |
| Compatibility | Springfield Armory Hellcat, Springfield Armory Hellcat Pro |
Yes. The Tyrant CNC extended mag release is designed to fit both the Springfield Armory Hellcat and Hellcat Pro models.
Absolutely. The release is fully ambidextrous—you can flip it 180 degrees to operate from either the right or left side of the frame, making it ideal for left-handed shooters or training both-hands operation.
The raised surface (approximately 1.95mm higher than factory) gives you more real estate to press with your thumb or trigger finger, allowing faster, more reliable magazine drops—especially useful during high-stress drills or competitions.
Tyrant CNC machines this from 7075 aerospace-grade aluminum, a material with composition and hardness similar to steel. It's designed to resist the wear that comes from repeated contact with steel magazines, potentially outlasting lesser aluminum alternatives.
SKU: 144597738 • Width: 4in • Height: 0.3in • Depth: 4.5in • Weight: 0.015oz