Tyrant Cnc152746473
Tyrant Cnc Tdechetrigblk/Gold I.T.T.S Black/Gold Springfield Echelon$76.46
Availability: In Stock
The Tyrant CNC I.T.T.S. trigger for Springfield Armory Echelon pistols is a precision-machined upgrade designed for shooters who want a refined, responsive trigger without the guesswork. Built from 6000-series aluminum with a stainless steel safety blade, this trigger replaces the factory unit with a drop-in that cuts pre-travel by 20%, delivering faster lock time and sharper feedback when it counts. If you shoot an Echelon and find the stock trigger sluggish or spongy, this is a direct answer.
What sets the Tyrant apart is attention to detail: a custom heat-treated stainless spring keeps performance consistent across thousands of rounds, while the factory-standard 4-pound pull weight balances control with safety. The hybrid ergonomic profile—straight blade with a curved lip—fits the web of your hand naturally, and the fully enclosed safety blade eliminates pinching and fumbling. Assembly is simpler than the OEM design too; Tyrant ditched the roll pin in favor of a custom screw mechanism, so maintenance and takedown are more intuitive.
The firmer reset compared to factory triggers gives you unmistakable tactile confirmation with each break, which tightens your groups and sharpens your shot placement. Finished in your choice of gold or black anodize, it's as much a statement of intent as it is a functional upgrade. Whether you run your Echelon at the range, in competition, or for defensive carry, a lighter, crisper trigger makes you faster and more accurate.
| Brand | Tyrant CNC |
| Model | I.T.T.S. (Improved Tactical Trigger System) |
| Firearm Compatibility | Springfield Armory Echelon |
| Pull Weight | 4 pounds |
| Pre-Travel Reduction | 20% reduction vs. OEM |
| Material (Body) | 6000-series aluminum |
| Material (Safety Blade) | Stainless steel |
| Spring | Custom heat-treated stainless steel |
| Assembly Method | Custom screw (replaces roll pin) |
| Finish Options | Gold or Black anodize |
| Ergonomic Profile | Hybrid: straight blade with curved lip |
| Safety Blade | Fully enclosed (pinch-proof) |
Yes. The Tyrant CNC I.T.T.S. trigger is specifically engineered for the Springfield Armory Echelon platform. It uses a custom screw assembly instead of the factory roll pin, which simplifies installation.
The pull weight is a consistent 4 pounds—the same as the factory Echelon trigger. This is a proven safe weight that balances ease of use with security, and the enclosed safety blade prevents accidental discharge from pinching or snagging.
You'll notice a 20% reduction in pre-travel, meaning less dead space before the trigger breaks. Combined with a firmer reset than OEM, you get faster shot-to-shot capability and clearer feedback for precision shooting and follow-up accuracy.
Both finishes are functionally identical; the choice is purely aesthetic. Gold has a distinctive look that stands out, while black blends with most frame colors and finishes.
SKU: 152747428 • Width: 4in • Height: 0.8in • Depth: 4.5in • Weight: 0.035oz
Availability: In Stock
The Tyrant CNC I.T.T.S. trigger for Springfield Armory Echelon pistols is a precision-machined upgrade designed for shooters who want a refined, responsive trigger without the guesswork. Built from 6000-series aluminum with a stainless steel safety blade, this trigger replaces the factory unit with a drop-in that cuts pre-travel by 20%, delivering faster lock time and sharper feedback when it counts. If you shoot an Echelon and find the stock trigger sluggish or spongy, this is a direct answer.
What sets the Tyrant apart is attention to detail: a custom heat-treated stainless spring keeps performance consistent across thousands of rounds, while the factory-standard 4-pound pull weight balances control with safety. The hybrid ergonomic profile—straight blade with a curved lip—fits the web of your hand naturally, and the fully enclosed safety blade eliminates pinching and fumbling. Assembly is simpler than the OEM design too; Tyrant ditched the roll pin in favor of a custom screw mechanism, so maintenance and takedown are more intuitive.
The firmer reset compared to factory triggers gives you unmistakable tactile confirmation with each break, which tightens your groups and sharpens your shot placement. Finished in your choice of gold or black anodize, it's as much a statement of intent as it is a functional upgrade. Whether you run your Echelon at the range, in competition, or for defensive carry, a lighter, crisper trigger makes you faster and more accurate.
| Brand | Tyrant CNC |
| Model | I.T.T.S. (Improved Tactical Trigger System) |
| Firearm Compatibility | Springfield Armory Echelon |
| Pull Weight | 4 pounds |
| Pre-Travel Reduction | 20% reduction vs. OEM |
| Material (Body) | 6000-series aluminum |
| Material (Safety Blade) | Stainless steel |
| Spring | Custom heat-treated stainless steel |
| Assembly Method | Custom screw (replaces roll pin) |
| Finish Options | Gold or Black anodize |
| Ergonomic Profile | Hybrid: straight blade with curved lip |
| Safety Blade | Fully enclosed (pinch-proof) |
Yes. The Tyrant CNC I.T.T.S. trigger is specifically engineered for the Springfield Armory Echelon platform. It uses a custom screw assembly instead of the factory roll pin, which simplifies installation.
The pull weight is a consistent 4 pounds—the same as the factory Echelon trigger. This is a proven safe weight that balances ease of use with security, and the enclosed safety blade prevents accidental discharge from pinching or snagging.
You'll notice a 20% reduction in pre-travel, meaning less dead space before the trigger breaks. Combined with a firmer reset than OEM, you get faster shot-to-shot capability and clearer feedback for precision shooting and follow-up accuracy.
Both finishes are functionally identical; the choice is purely aesthetic. Gold has a distinctive look that stands out, while black blends with most frame colors and finishes.
SKU: 152747428 • Width: 4in • Height: 0.8in • Depth: 4.5in • Weight: 0.035oz