Tyrant Cnc144597707
Tyrant Cnc I.T.T.S Tdgtrig5Blackblack Glk G5 Triggr Shoe$67.46
Availability: In Stock
The Tyrant CNC I.T.T.S. trigger for Glock Gen 3/4 is a purpose-built upgrade for shooters who want a sharper, more responsive trigger break without sacrificing reliability. Whether you're running your carry gun at the range, on the clock at a match, or in duty use, a better trigger matters—and the I.T.T.S. delivers a noticeable improvement over factory Glock internals. Tyrant CNC engineered this trigger system to prioritize reset speed and ergonomic comfort, especially for shooters with larger hands who find standard Glock triggers cramped or awkward.
The I.T.T.S. uses a 30% power spring that cycles faster than OEM, helping you get back on target quicker between shots. The curved trigger profile is taller than stock, giving your finger a more natural purchase and reducing fatigue during extended shooting sessions. Construction relies on set screws rather than pins, a design choice that increases rigidity and durability under repeated firing cycles. Installation is straightforward for anyone comfortable with basic Glock trigger group takedown—no gunsmithing required.
Compatibility spans a broad range of Glock platforms: all Gen 3 and Gen 4 models in 9mm, .40 S&W, .357 SIG, and 10mm, including the full-size 17/22/31/37, compact 19/23/32/38, subcompact 26/27/33/39, and long-slide variants (24/34/35). If your carry or range gun is any of these models, the I.T.T.S. is a direct fit.
| Brand | Tyrant CNC |
| Product Line | I.T.T.S. (Improved Tyrant Trigger System) |
| Compatibility | Glock Gen 3 & Gen 4 (Models 17, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, 35, 37, 38, 39) |
| Spring Weight | 30% lighter than OEM |
| Trigger Profile | Curved, taller than standard |
| Retention Method | Set screws |
| Finish | Black |
Yes, if you own a Glock Gen 3 or Gen 4 in any of these models: 17, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, 35, 37, 38, or 39. This covers most common carry, duty, and range Glocks in 9mm, .40 S&W, .357 SIG, and 10mm.
The I.T.T.S. is a direct drop-in replacement for your OEM trigger and shoe. Anyone comfortable field-stripping a Glock can install it; no special tools or gunsmithing required.
The 30% lighter trigger spring produces a faster reset, allowing you to re-engage the trigger and fire the next shot more quickly. This makes for snappier shot-to-shot performance, especially useful for rapid-fire practice or competition shooting.
The curved, taller profile is designed with shooters who have larger hands in mind. It provides more surface area and a more natural angle, reducing finger strain and improving control compared to the stock Glock trigger.
SKU: 144600219 • Width: 4in • Height: 0.25in • Depth: 4in • Weight: 0.06oz
Availability: In Stock
The Tyrant CNC I.T.T.S. trigger for Glock Gen 3/4 is a purpose-built upgrade for shooters who want a sharper, more responsive trigger break without sacrificing reliability. Whether you're running your carry gun at the range, on the clock at a match, or in duty use, a better trigger matters—and the I.T.T.S. delivers a noticeable improvement over factory Glock internals. Tyrant CNC engineered this trigger system to prioritize reset speed and ergonomic comfort, especially for shooters with larger hands who find standard Glock triggers cramped or awkward.
The I.T.T.S. uses a 30% power spring that cycles faster than OEM, helping you get back on target quicker between shots. The curved trigger profile is taller than stock, giving your finger a more natural purchase and reducing fatigue during extended shooting sessions. Construction relies on set screws rather than pins, a design choice that increases rigidity and durability under repeated firing cycles. Installation is straightforward for anyone comfortable with basic Glock trigger group takedown—no gunsmithing required.
Compatibility spans a broad range of Glock platforms: all Gen 3 and Gen 4 models in 9mm, .40 S&W, .357 SIG, and 10mm, including the full-size 17/22/31/37, compact 19/23/32/38, subcompact 26/27/33/39, and long-slide variants (24/34/35). If your carry or range gun is any of these models, the I.T.T.S. is a direct fit.
| Brand | Tyrant CNC |
| Product Line | I.T.T.S. (Improved Tyrant Trigger System) |
| Compatibility | Glock Gen 3 & Gen 4 (Models 17, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, 35, 37, 38, 39) |
| Spring Weight | 30% lighter than OEM |
| Trigger Profile | Curved, taller than standard |
| Retention Method | Set screws |
| Finish | Black |
Yes, if you own a Glock Gen 3 or Gen 4 in any of these models: 17, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, 35, 37, 38, or 39. This covers most common carry, duty, and range Glocks in 9mm, .40 S&W, .357 SIG, and 10mm.
The I.T.T.S. is a direct drop-in replacement for your OEM trigger and shoe. Anyone comfortable field-stripping a Glock can install it; no special tools or gunsmithing required.
The 30% lighter trigger spring produces a faster reset, allowing you to re-engage the trigger and fire the next shot more quickly. This makes for snappier shot-to-shot performance, especially useful for rapid-fire practice or competition shooting.
The curved, taller profile is designed with shooters who have larger hands in mind. It provides more surface area and a more natural angle, reducing finger strain and improving control compared to the stock Glock trigger.
SKU: 144600219 • Width: 4in • Height: 0.25in • Depth: 4in • Weight: 0.06oz