Tyrant Cnc144599079
Tyrant Cnc Extended Mag Release Tdp365Eblack Sig P365$29.66
Availability: In Stock
The Tyrant CNC Extended Mag Release for SIG P365 is a precision-engineered upgrade that turns one of the P365's smallest controls into a faster, more ergonomic operation point. If you're carrying or running a P365, P365-X, P365-XL, P365 MACRO, or SPECTRE SERIES, this extended magazine release cuts down the manual dexterity needed to drop a mag under pressure or speed. Tyrant CNC manufactured this piece using metal injection molding in 17-4 stainless steel—a material that handles corrosion and repeated use without degradation. The result is a component that's both rugged and precise, scaled to fit your carry rig without snagging inside-the-waistband holsters.
What sets this release apart is the design philosophy behind it. The extended and raised profile gives your thumb or trigger finger a bigger, faster target when you need it most, whether you're at the range, in a match, or executing a defensive drill. Deep grooves across the surface deliver confident purchase even when your hands are wet or gloved, but without the aggressive bite that makes everyday carry uncomfortable. The tactile feedback is intentional—enough to guide your finger, not so much that it feels punishing.
Tyrant CNC finishes the release with a bead-blasted matte base and then applies a PVD (physical vapor deposition) coating for additional protection against wear and corrosion. This extended mag release comes in stealth black or gold, letting you match your aesthetic without sacrificing durability. It's the kind of upgrade that doesn't redesign your gun—it refines the experience of running it.
| Brand | Tyrant CNC |
| Product Type | Extended Magazine Release |
| Firearm Fit | SIG SAUER P365, P365-X, P365-XL, P365 MACRO, P365 SPECTRE SERIES (including California-compliant versions) |
| Material | 17-4 Stainless Steel |
| Manufacturing Process | Metal Injection Molding (MIM) |
| Finish | Bead-blasted matte with PVD coating |
| Available Finishes | Black, Gold |
| Holster Compatibility | IWB (Inside-the-Waistband) compatible |
Yes. The Tyrant CNC Extended Mag Release fits the P365, P365-X, P365-XL, P365 MACRO, and SPECTRE SERIES platforms, including California-compliant versions.
No. The design was engineered to remain compatible with inside-the-waistband (IWB) holsters, so you don't sacrifice carry comfort or functionality for the extended profile.
The release is manufactured from 17-4 stainless steel via metal injection molding, a process that ensures high precision and uniform quality. The material resists corrosion and is built to withstand regular use. A PVD coating adds an additional protective layer against wear.
The Tyrant CNC extended mag release is available in black or gold, both applied over the bead-blasted matte base for a durable, professional appearance.
SKU: 144597714 • Width: 4in • Height: 0.25in • Depth: 4in • Weight: 0.06oz
Availability: In Stock
The Tyrant CNC Extended Mag Release for SIG P365 is a precision-engineered upgrade that turns one of the P365's smallest controls into a faster, more ergonomic operation point. If you're carrying or running a P365, P365-X, P365-XL, P365 MACRO, or SPECTRE SERIES, this extended magazine release cuts down the manual dexterity needed to drop a mag under pressure or speed. Tyrant CNC manufactured this piece using metal injection molding in 17-4 stainless steel—a material that handles corrosion and repeated use without degradation. The result is a component that's both rugged and precise, scaled to fit your carry rig without snagging inside-the-waistband holsters.
What sets this release apart is the design philosophy behind it. The extended and raised profile gives your thumb or trigger finger a bigger, faster target when you need it most, whether you're at the range, in a match, or executing a defensive drill. Deep grooves across the surface deliver confident purchase even when your hands are wet or gloved, but without the aggressive bite that makes everyday carry uncomfortable. The tactile feedback is intentional—enough to guide your finger, not so much that it feels punishing.
Tyrant CNC finishes the release with a bead-blasted matte base and then applies a PVD (physical vapor deposition) coating for additional protection against wear and corrosion. This extended mag release comes in stealth black or gold, letting you match your aesthetic without sacrificing durability. It's the kind of upgrade that doesn't redesign your gun—it refines the experience of running it.
| Brand | Tyrant CNC |
| Product Type | Extended Magazine Release |
| Firearm Fit | SIG SAUER P365, P365-X, P365-XL, P365 MACRO, P365 SPECTRE SERIES (including California-compliant versions) |
| Material | 17-4 Stainless Steel |
| Manufacturing Process | Metal Injection Molding (MIM) |
| Finish | Bead-blasted matte with PVD coating |
| Available Finishes | Black, Gold |
| Holster Compatibility | IWB (Inside-the-Waistband) compatible |
Yes. The Tyrant CNC Extended Mag Release fits the P365, P365-X, P365-XL, P365 MACRO, and SPECTRE SERIES platforms, including California-compliant versions.
No. The design was engineered to remain compatible with inside-the-waistband (IWB) holsters, so you don't sacrifice carry comfort or functionality for the extended profile.
The release is manufactured from 17-4 stainless steel via metal injection molding, a process that ensures high precision and uniform quality. The material resists corrosion and is built to withstand regular use. A PVD coating adds an additional protective layer against wear.
The Tyrant CNC extended mag release is available in black or gold, both applied over the bead-blasted matte base for a durable, professional appearance.
SKU: 144597714 • Width: 4in • Height: 0.25in • Depth: 4in • Weight: 0.06oz