$26.36
Loading...
Loading...
Loading...
Availability: In Stock
The Truglo Picatinny 3/4" riser mount is a straightforward way to boost your optic line higher on an AR-15 or any modern rifle with a Picatinny rail. If you're running a scope, red dot, or other sighting system and need to clear a rail-mounted foregrip, handguard, or just prefer a cheekweld closer to your scope tube, this two-piece aluminum mount does exactly that—no gunsmithing, no drilling, no permanent modifications. Drop it onto your existing rail, tighten it down, and you're done.
Built from CNC-machined aluminum, it's light and tough enough to take whatever you're throwing downrange. At roughly 1.36 inches long, it's compact and doesn't eat up much rail real estate. The 3/4-inch rise is enough to gain clearance on most setups without pushing your sight height so high that it feels awkward or loses rigidity. Works equally well for hunters stacking a magnified scope, shooters running a compact reflex sight, or anyone mixing optics with tight rail configurations.
Installation is straightforward: slide it onto your Picatinny rail, snug the mounting bolts, mount your optic on top, and you're ready to zero. No special tools needed. If you ever want to remove it, the gun is unharmed—that's the beauty of a picatinny accessory. Whether you're building an AR platform, re-configuring a modern rifle, or experimenting with optic heights, this mount is a no-fuss solution that actually works.
| Brand | Truglo |
| Mount Type | Picatinny Riser, 2-Piece |
| Height Increase | 3/4 inch |
| Length | Approximately 1.36 inches |
| Material | CNC-Machined Aluminum |
| Finish | Black |
| Rail Compatibility | Picatinny-style rails |
Yes. If your rifle has a Picatinny rail on the upper receiver (the flat-top common on modern AR-15s) or on any other component, this mount will fit and function.
Either one. The mount works with any optic or sight that features Picatinny mounting slots, including red dot sights, magnified scopes, and other rail-mounted optics.
No. This is a non-permanent accessory. It clamps onto your existing Picatinny rail and can be removed at any time without modification to the gun. Installation requires no drilling, cutting, or gunsmithing.
That depends on your foregrip and your specific setup. The 3/4-inch rise works for most common rail-mounted grips and handguards, but measure your own configuration to be sure.
SKU: 114464002 • Width: 5.1in • Height: 0.4in • Depth: 5.8in • Weight: 0.2oz
Availability: In Stock
The Truglo Picatinny 3/4" riser mount is a straightforward way to boost your optic line higher on an AR-15 or any modern rifle with a Picatinny rail. If you're running a scope, red dot, or other sighting system and need to clear a rail-mounted foregrip, handguard, or just prefer a cheekweld closer to your scope tube, this two-piece aluminum mount does exactly that—no gunsmithing, no drilling, no permanent modifications. Drop it onto your existing rail, tighten it down, and you're done.
Built from CNC-machined aluminum, it's light and tough enough to take whatever you're throwing downrange. At roughly 1.36 inches long, it's compact and doesn't eat up much rail real estate. The 3/4-inch rise is enough to gain clearance on most setups without pushing your sight height so high that it feels awkward or loses rigidity. Works equally well for hunters stacking a magnified scope, shooters running a compact reflex sight, or anyone mixing optics with tight rail configurations.
Installation is straightforward: slide it onto your Picatinny rail, snug the mounting bolts, mount your optic on top, and you're ready to zero. No special tools needed. If you ever want to remove it, the gun is unharmed—that's the beauty of a picatinny accessory. Whether you're building an AR platform, re-configuring a modern rifle, or experimenting with optic heights, this mount is a no-fuss solution that actually works.
| Brand | Truglo |
| Mount Type | Picatinny Riser, 2-Piece |
| Height Increase | 3/4 inch |
| Length | Approximately 1.36 inches |
| Material | CNC-Machined Aluminum |
| Finish | Black |
| Rail Compatibility | Picatinny-style rails |
Yes. If your rifle has a Picatinny rail on the upper receiver (the flat-top common on modern AR-15s) or on any other component, this mount will fit and function.
Either one. The mount works with any optic or sight that features Picatinny mounting slots, including red dot sights, magnified scopes, and other rail-mounted optics.
No. This is a non-permanent accessory. It clamps onto your existing Picatinny rail and can be removed at any time without modification to the gun. Installation requires no drilling, cutting, or gunsmithing.
That depends on your foregrip and your specific setup. The 3/4-inch rise works for most common rail-mounted grips and handguards, but measure your own configuration to be sure.
SKU: 114464002 • Width: 5.1in • Height: 0.4in • Depth: 5.8in • Weight: 0.2oz