True Precision115792816
True Precision 9MM Black Nitride Barrel for Sig P320 Compact$170.99
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
The True Precision Gold Titanium Nitride threaded barrel for Sig P320 Compact is a precision-engineered drop-in replacement that brings competition-grade accuracy and durability to your carry or range setup. Manufactured entirely in the USA from 416R stainless steel, this barrel is built to tighter tolerances than factory Sig barrels, with proprietary broach-cut rifling specifically designed to enhance accuracy potential while remaining safe for all ammunition types—including cast lead rounds. If you're running a P320 Compact, X-Carry, or M18, this threaded barrel offers the performance upgrade serious shooters demand without complicated installation.
The 1/10 RH twist rifling and competition-style 11-degree target crown work together to support precision shooting, whether you're fine-tuning at the range or relying on your pistol in the field. The threaded muzzle comes equipped with a Viton high-heat integral O-ring lock thread protector, so you're ready to mount a suppressor or accessory immediately—no separate parts to chase down. The barrel measures 4.64 inches from breechface to muzzle without the protector, fitting within the compact footprint of your platform. True Precision refined the chamber to SAAMI spec and added enhanced chamfers and radius cuts throughout, resulting in a noticeably better-than-factory fit that cycles reliably across different P320 variants. The Gold Titanium Nitride finish delivers corrosion resistance and a distinctive look while holding up to the wear of regular shooting.
Installation is straightforward—this is a genuine drop-in design with no gunsmithing required on Compact models (minor fitting may be necessary on some X-Carry variants, and note that this barrel does not fit the X-Compact). If you own multiple P320 frames, the barrel retains the M18 loaded chamber indicator cut, preserving cross-platform compatibility. For shooters looking to upgrade their P320 Compact's accuracy, durability, and threaded versatility without compromising reliability, this barrel delivers.
| Caliber | 9mm |
| Rifling | 1/10 RH twist, 6-groove broach cut |
| Length (breechface to muzzle) | 4.64 inches (without thread protector) |
| Muzzle Thread | 1/2x28 |
| Crown | 11-degree competition-style target crown |
| Material | 416R stainless steel, USA sourced |
| Finish | Gold Titanium Nitride |
| Chamber | SAAMI spec |
| Included Accessories | Viton high-heat integral O-ring lock thread protector |
| Fits | Sig P320 Compact, X-Carry (minor fitting may be required on some models), M18 |
| Does Not Fit | X-Compact |
| Installation | Drop-in design (no gunsmithing required on Compact) |
| Origin | 100% USA designed and manufactured |
Yes, this barrel is compatible with the P320 X-Carry, though minor fitting may be required on some X-Carry models. It does not fit the X-Compact. Installation is drop-in on the Compact; if you own an X-Carry, test fit carefully or contact True Precision before proceeding.
On the P320 Compact, this is a genuine drop-in with no gunsmithing required. Some X-Carry variants may need minor fitting, and the M18 is also compatible. The design prioritizes reliability and fit from the factory.
The muzzle is threaded 1/2x28, the industry standard for 9mm suppressors and muzzle devices. A Viton high-heat integral O-ring lock thread protector is included, so you can run it as-is or mount a suppressor without purchasing additional parts.
Yes. The 6-groove broach-cut rifling is specifically designed to handle all ammunition types safely, including cast lead rounds.
SKU: 115861029 • Width: 2.5in • Height: 1in • Depth: 6.5in • Weight: 0.31oz
Availability: In Stock
Current Stock: Out of stock
The True Precision Gold Titanium Nitride threaded barrel for Sig P320 Compact is a precision-engineered drop-in replacement that brings competition-grade accuracy and durability to your carry or range setup. Manufactured entirely in the USA from 416R stainless steel, this barrel is built to tighter tolerances than factory Sig barrels, with proprietary broach-cut rifling specifically designed to enhance accuracy potential while remaining safe for all ammunition types—including cast lead rounds. If you're running a P320 Compact, X-Carry, or M18, this threaded barrel offers the performance upgrade serious shooters demand without complicated installation.
The 1/10 RH twist rifling and competition-style 11-degree target crown work together to support precision shooting, whether you're fine-tuning at the range or relying on your pistol in the field. The threaded muzzle comes equipped with a Viton high-heat integral O-ring lock thread protector, so you're ready to mount a suppressor or accessory immediately—no separate parts to chase down. The barrel measures 4.64 inches from breechface to muzzle without the protector, fitting within the compact footprint of your platform. True Precision refined the chamber to SAAMI spec and added enhanced chamfers and radius cuts throughout, resulting in a noticeably better-than-factory fit that cycles reliably across different P320 variants. The Gold Titanium Nitride finish delivers corrosion resistance and a distinctive look while holding up to the wear of regular shooting.
Installation is straightforward—this is a genuine drop-in design with no gunsmithing required on Compact models (minor fitting may be necessary on some X-Carry variants, and note that this barrel does not fit the X-Compact). If you own multiple P320 frames, the barrel retains the M18 loaded chamber indicator cut, preserving cross-platform compatibility. For shooters looking to upgrade their P320 Compact's accuracy, durability, and threaded versatility without compromising reliability, this barrel delivers.
| Caliber | 9mm |
| Rifling | 1/10 RH twist, 6-groove broach cut |
| Length (breechface to muzzle) | 4.64 inches (without thread protector) |
| Muzzle Thread | 1/2x28 |
| Crown | 11-degree competition-style target crown |
| Material | 416R stainless steel, USA sourced |
| Finish | Gold Titanium Nitride |
| Chamber | SAAMI spec |
| Included Accessories | Viton high-heat integral O-ring lock thread protector |
| Fits | Sig P320 Compact, X-Carry (minor fitting may be required on some models), M18 |
| Does Not Fit | X-Compact |
| Installation | Drop-in design (no gunsmithing required on Compact) |
| Origin | 100% USA designed and manufactured |
Yes, this barrel is compatible with the P320 X-Carry, though minor fitting may be required on some X-Carry models. It does not fit the X-Compact. Installation is drop-in on the Compact; if you own an X-Carry, test fit carefully or contact True Precision before proceeding.
On the P320 Compact, this is a genuine drop-in with no gunsmithing required. Some X-Carry variants may need minor fitting, and the M18 is also compatible. The design prioritizes reliability and fit from the factory.
The muzzle is threaded 1/2x28, the industry standard for 9mm suppressors and muzzle devices. A Viton high-heat integral O-ring lock thread protector is included, so you can run it as-is or mount a suppressor without purchasing additional parts.
Yes. The 6-groove broach-cut rifling is specifically designed to handle all ammunition types safely, including cast lead rounds.
SKU: 115861029 • Width: 2.5in • Height: 1in • Depth: 6.5in • Weight: 0.31oz