Trijicon126512346
Trijicon Bolt Mount Static 30mm 1.125" Precision Scope Ring$238.01
Availability: In Stock
The Trijicon 30mm Bolt Mount Static Scope Ring is a low-profile mounting solution built for hunters and precision riflemen who demand reliability without bulk. Engineered to position your optic as close to the bore axis as possible, this 1.06" height ring lets you run a compact cheek weld and faster sight picture—especially valuable on bolt-action rifles where every ounce and inch of clearance counts. The design keeps your rifle's profile sleek and snag-free, which matters in the field or on the bench.
Built from 6061-T6 aluminum and rated to Mil-Spec drop-test standards, this mount delivers the durability Trijicon is known for without unnecessary weight. The bolt-down configuration provides a fixed, rock-solid hold once torqued properly—no quick-release levers or automated retention systems to hunt for in the dark. If your scope zero matters (and it does), the Trijicon mount returns to zero reliably shot after shot, season after season.
The flush mounting bolts keep the ring's profile low and snag-resistant, a detail that matters when you're moving through brush, crawling into a shooting position, or just carrying the rifle in tight quarters. Compatible with any Mil-Spec or NATO Picatinny rail, this ring works across a wide range of bolt-action platforms—whether you're building a long-range hunting rig, a competition precision rifle, or upgrading an existing system.
| Tube Diameter | 30mm |
| Ring Height | 1.06 inches |
| Material | 6061-T6 aluminum |
| Mount Type | Bolt-down static ring |
| Rail Compatibility | Mil-Spec and NATO Picatinny |
The mount is compatible with any Mil-Spec or NATO Picatinny rail, covering the vast majority of modern bolt-action rifles and receivers on the market today.
At 1.06" height, the Trijicon ring sits your optic closer to the bore axis than standard medium or high rings, giving you a lower cheek weld and faster target acquisition. This is especially useful on hunting rifles and precision rifles where every bit of ergonomics counts.
This is a static, bolt-down ring. It doesn't feature a quick-release mechanism—once properly torqued to your rail, it provides a fixed, permanent mounting point rated for consistent return to zero.
Any scope with a 30mm main tube will fit. The ring's 1.06" height works well with most modern optics, though final fitment and clearance should be verified with your specific rifle and scope combination.
SKU: 126513757 • Width: 5in • Height: 3in • Depth: 8.25in • Weight: 0.63oz
Availability: In Stock
The Trijicon 30mm Bolt Mount Static Scope Ring is a low-profile mounting solution built for hunters and precision riflemen who demand reliability without bulk. Engineered to position your optic as close to the bore axis as possible, this 1.06" height ring lets you run a compact cheek weld and faster sight picture—especially valuable on bolt-action rifles where every ounce and inch of clearance counts. The design keeps your rifle's profile sleek and snag-free, which matters in the field or on the bench.
Built from 6061-T6 aluminum and rated to Mil-Spec drop-test standards, this mount delivers the durability Trijicon is known for without unnecessary weight. The bolt-down configuration provides a fixed, rock-solid hold once torqued properly—no quick-release levers or automated retention systems to hunt for in the dark. If your scope zero matters (and it does), the Trijicon mount returns to zero reliably shot after shot, season after season.
The flush mounting bolts keep the ring's profile low and snag-resistant, a detail that matters when you're moving through brush, crawling into a shooting position, or just carrying the rifle in tight quarters. Compatible with any Mil-Spec or NATO Picatinny rail, this ring works across a wide range of bolt-action platforms—whether you're building a long-range hunting rig, a competition precision rifle, or upgrading an existing system.
| Tube Diameter | 30mm |
| Ring Height | 1.06 inches |
| Material | 6061-T6 aluminum |
| Mount Type | Bolt-down static ring |
| Rail Compatibility | Mil-Spec and NATO Picatinny |
The mount is compatible with any Mil-Spec or NATO Picatinny rail, covering the vast majority of modern bolt-action rifles and receivers on the market today.
At 1.06" height, the Trijicon ring sits your optic closer to the bore axis than standard medium or high rings, giving you a lower cheek weld and faster target acquisition. This is especially useful on hunting rifles and precision rifles where every bit of ergonomics counts.
This is a static, bolt-down ring. It doesn't feature a quick-release mechanism—once properly torqued to your rail, it provides a fixed, permanent mounting point rated for consistent return to zero.
Any scope with a 30mm main tube will fit. The ring's 1.06" height works well with most modern optics, though final fitment and clearance should be verified with your specific rifle and scope combination.
SKU: 126513757 • Width: 5in • Height: 3in • Depth: 8.25in • Weight: 0.63oz