Trijicon114464574
Trijicon Compact ACOG Q-LOC Rifle Scope Mount - Matte Black$165.99
Availability: In Stock
Current Stock: Out of stock
The Trijicon ACOG & VCOG Q-LOC rifle scope mount is a purpose-built solution for shooters who demand rock-solid retention and repeatable zero without unnecessary complexity. Built from mil-spec 6061-T6 aluminum and drop-test rated to military standards, this mount locks your ACOG or VCOG to any Picatinny rail—tactical rifle, patrol carbine, or competition build—with a one-handed, tool-free clamping system. The Q-LOC design uses spring tension to maintain constant pressure on your optic, so even if you forget to fully cinch the knobs, your zero stays put. That matters when you're sling-switching between positions or running a rifle hard in training.
Low profile and lightweight without sacrificing strength, the Q-LOC mount sits 1.535 inches above the rail, keeping your sight picture natural and your setup balanced. The matte black anodized finish blends seamlessly with modern rifle platforms and won't telegraph your position. Whether you're mounting a compact ACOG on a patrol rifle, DMR build, or dedicated optic platform, this mount is engineered for the job and made in the USA.
Setup is genuinely fast: position the mount on your rail, hand-tighten the Q-LOC knobs, and you're done. Spring tension does the heavy lifting. If you need maximum clamping force for a heavy recoil gun or extreme environment, the torque spec allows up to 66 in./lbs., but the design won't let you lose zero chasing higher numbers.
| Material | 6061-T6 Aluminum |
| Finish | Matte Black Anodized |
| Mounting Interface | Mil-Spec/NATO Picatinny Rail |
| Optical Axis Height | 1.535" above rail |
| Clamping System | Q-LOC Spring-Loaded (Tool-Free) |
| Torque Specification (Spring Tension) | 12–16 in./lbs. |
| Maximum Torque | 44–66 in./lbs. |
| Country of Origin | USA |
Yes—this mount is designed specifically for Trijicon ACOG and VCOG optics and works with any Mil-Spec or NATO Picatinny rail.
No. The Q-LOC system is tool-free and one-handed. Hand-tighten the spring-loaded knobs and you're done. You can optionally apply torque up to 66 in./lbs. with a wrench if you prefer maximum clamping force.
The Q-LOC mount uses spring tension to apply constant, even pressure on your optic. This means your zero remains secure even if the knobs aren't fully tightened—a feature that helps in field conditions or fast setups.
The optical axis sits 1.535 inches above the Picatinny rail, providing a low-profile sight picture suitable for most rifle builds.
SKU: 114465029 • Width: 4in • Height: 2in • Depth: 6.75in • Weight: 0.31oz
Availability: In Stock
Current Stock: Out of stock
The Trijicon ACOG & VCOG Q-LOC rifle scope mount is a purpose-built solution for shooters who demand rock-solid retention and repeatable zero without unnecessary complexity. Built from mil-spec 6061-T6 aluminum and drop-test rated to military standards, this mount locks your ACOG or VCOG to any Picatinny rail—tactical rifle, patrol carbine, or competition build—with a one-handed, tool-free clamping system. The Q-LOC design uses spring tension to maintain constant pressure on your optic, so even if you forget to fully cinch the knobs, your zero stays put. That matters when you're sling-switching between positions or running a rifle hard in training.
Low profile and lightweight without sacrificing strength, the Q-LOC mount sits 1.535 inches above the rail, keeping your sight picture natural and your setup balanced. The matte black anodized finish blends seamlessly with modern rifle platforms and won't telegraph your position. Whether you're mounting a compact ACOG on a patrol rifle, DMR build, or dedicated optic platform, this mount is engineered for the job and made in the USA.
Setup is genuinely fast: position the mount on your rail, hand-tighten the Q-LOC knobs, and you're done. Spring tension does the heavy lifting. If you need maximum clamping force for a heavy recoil gun or extreme environment, the torque spec allows up to 66 in./lbs., but the design won't let you lose zero chasing higher numbers.
| Material | 6061-T6 Aluminum |
| Finish | Matte Black Anodized |
| Mounting Interface | Mil-Spec/NATO Picatinny Rail |
| Optical Axis Height | 1.535" above rail |
| Clamping System | Q-LOC Spring-Loaded (Tool-Free) |
| Torque Specification (Spring Tension) | 12–16 in./lbs. |
| Maximum Torque | 44–66 in./lbs. |
| Country of Origin | USA |
Yes—this mount is designed specifically for Trijicon ACOG and VCOG optics and works with any Mil-Spec or NATO Picatinny rail.
No. The Q-LOC system is tool-free and one-handed. Hand-tighten the spring-loaded knobs and you're done. You can optionally apply torque up to 66 in./lbs. with a wrench if you prefer maximum clamping force.
The Q-LOC mount uses spring tension to apply constant, even pressure on your optic. This means your zero remains secure even if the knobs aren't fully tightened—a feature that helps in field conditions or fast setups.
The optical axis sits 1.535 inches above the Picatinny rail, providing a low-profile sight picture suitable for most rifle builds.
SKU: 114465029 • Width: 4in • Height: 2in • Depth: 6.75in • Weight: 0.31oz