Triggertech115662400
TriggerTech R70SBS13TNC Single-Stage Curved Trigger for Remington 700 (1-3.5 lbs, No Bolt Release)$229.99
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
A TriggerTech R70SBB13TNC single-stage curved trigger brings match-grade precision to your right-handed Remington 700. Built with CLKR Technology and refined internals, this drop-in trigger delivers the crisp, predictable break that serious shooters demand—without the friction-induced creep that undermines accuracy. The pull weight adjusts from 1 to 3.5 pounds in 1-ounce increments via an external set screw, so you can dial in the exact break that works for your shooting style, whether you're behind a precision rifle at the range or hunting in unpredictable conditions.
What sets the Special model apart is how the break feels in your hand. Most shooters report that the actual pull sensation is roughly half a pound lighter than a friction-based trigger pulling the same weight—a genuine advantage when you're managing recoil and sight picture on a shot that counts. The curved bow sits naturally in the trigger finger, encouraging a consistent press straight back. Combined with zero creep and minimal overtravel, the result is repeatability you can build a load around.
Built tough: the housing is 7075-T6 aluminum, and the sear and firing pin components are 440C stainless steel. This trigger functions reliably in cold, dirt, and wet environments where other mechanisms might hesitate. It arrives ready to drop into any right-handed Rem 700 platform—tactical, hunting, or competition rifle—and the no-bolt-release design keeps the footprint simple and the trigger group proven.
| Trigger Type | Single-stage curved |
| Pull Weight Range | 1.0–3.5 lbs |
| Adjustment Increments | 1 oz |
| Adjustment Method | External set screw |
| Housing Material | 7075-T6 aluminum |
| Internal Components | 440C stainless steel |
| Compatibility | Right-handed Remington 700 |
| Bolt Release | None |
Yes. The TriggerTech R70SBB13TNC is engineered as a drop-in trigger for right-handed Remington 700 platform rifles, including tactical, hunting, and target variants.
Pull weight is adjusted using an external set screw. You can dial in any setting from 1 to 3.5 pounds in 1-ounce increments without removing the trigger from the rifle.
No. This is a no-bolt-release model. If your rifle requires a bolt-release trigger, this is not the right fit.
The CLKR Technology and precision internal refinement eliminate the friction and creep that typically make a trigger feel heavier than its actual pull weight. Shooters commonly report the subjective feel is around 0.5 lbs lighter than the set weight, which translates to better control and repeatability.
SKU: 115666445 • Width: 4.2in • Height: 1.7in • Depth: 5.3in • Weight: 0.38oz
Availability: In Stock
Current Stock: Out of stock
A TriggerTech R70SBB13TNC single-stage curved trigger brings match-grade precision to your right-handed Remington 700. Built with CLKR Technology and refined internals, this drop-in trigger delivers the crisp, predictable break that serious shooters demand—without the friction-induced creep that undermines accuracy. The pull weight adjusts from 1 to 3.5 pounds in 1-ounce increments via an external set screw, so you can dial in the exact break that works for your shooting style, whether you're behind a precision rifle at the range or hunting in unpredictable conditions.
What sets the Special model apart is how the break feels in your hand. Most shooters report that the actual pull sensation is roughly half a pound lighter than a friction-based trigger pulling the same weight—a genuine advantage when you're managing recoil and sight picture on a shot that counts. The curved bow sits naturally in the trigger finger, encouraging a consistent press straight back. Combined with zero creep and minimal overtravel, the result is repeatability you can build a load around.
Built tough: the housing is 7075-T6 aluminum, and the sear and firing pin components are 440C stainless steel. This trigger functions reliably in cold, dirt, and wet environments where other mechanisms might hesitate. It arrives ready to drop into any right-handed Rem 700 platform—tactical, hunting, or competition rifle—and the no-bolt-release design keeps the footprint simple and the trigger group proven.
| Trigger Type | Single-stage curved |
| Pull Weight Range | 1.0–3.5 lbs |
| Adjustment Increments | 1 oz |
| Adjustment Method | External set screw |
| Housing Material | 7075-T6 aluminum |
| Internal Components | 440C stainless steel |
| Compatibility | Right-handed Remington 700 |
| Bolt Release | None |
Yes. The TriggerTech R70SBB13TNC is engineered as a drop-in trigger for right-handed Remington 700 platform rifles, including tactical, hunting, and target variants.
Pull weight is adjusted using an external set screw. You can dial in any setting from 1 to 3.5 pounds in 1-ounce increments without removing the trigger from the rifle.
No. This is a no-bolt-release model. If your rifle requires a bolt-release trigger, this is not the right fit.
The CLKR Technology and precision internal refinement eliminate the friction and creep that typically make a trigger feel heavier than its actual pull weight. Shooters commonly report the subjective feel is around 0.5 lbs lighter than the set weight, which translates to better control and repeatability.
SKU: 115666445 • Width: 4.2in • Height: 1.7in • Depth: 5.3in • Weight: 0.38oz