Availability: In Stock
The TriggerTech Special single-stage flat trigger for Remington 700 right-hand rifles delivers the precision and consistency that long-range and competitive shooters demand. This drop-in trigger upgrades your accuracy potential with a true zero-creep break, minimal overtravel, and pull weights you can fine-tune from 1 to 3.5 lbs using an external set screw—no gunsmithing required. Most shooters report the break feeling roughly half a pound lighter than friction-based triggers at the same measured weight, making follow-up shots faster and more predictable.
Built on TriggerTech's Frictionless Release Technology, the Special uses hardened 440C stainless steel internals that resist corrosion and deliver shot-to-shot consistency that doesn't degrade over thousands of rounds. Because this design eliminates reliance on coatings, polishing, or lubrication at the critical engagement surfaces, you get reliability in harsh field conditions—whether you're on a cold mountain hunt or a hot range day—without the creep and inconsistency that plague traditional designs.
The externally accessible adjustment screw lets you dial in your preferred pull weight in roughly 1-ounce increments, giving you flexibility to match your shooting style or competitive requirements. This is a serious upgrade for Remington 700 shooters serious about accuracy.
| Manufacturer | TriggerTech |
| Model | Special Single-Stage Flat Trigger |
| Platform | Remington 700 (right-hand) |
| Part Number | R70SBB13TBF |
| Pull Weight Range | 1.0–3.5 lbs |
| Adjustment Increments | Approximately 1 oz |
| Trigger Type | Single-stage flat |
| Internal Material | Hardened 440C stainless steel |
| Installation | Drop-in (no gunsmithing required) |
Yes—the TriggerTech Special is designed as a drop-in replacement for right-hand Remington 700 rifles. No gunsmithing or modifications are needed.
Yes. The external set screw allows you to adjust pull weight from 1.0 to 3.5 lbs in roughly 1-ounce increments without disassembling the rifle.
The Special offers a crisp, zero-creep break with minimal overtravel. Most shooters report the break feeling approximately 0.5 lbs lighter than friction-based triggers at the same measured pull weight, making it noticeably faster and more predictable for follow-up shots and competitive shooting.
Overweight firing pin springs can cause pull weights to vary above the advertised range. If you're using a heavier-than-standard firing pin spring, verify compatibility or consult TriggerTech's guidelines for your specific setup.
SKU: 115817295 • Width: 5in • Height: 1.7in • Depth: 5.5in • Weight: 0.38oz
Availability: In Stock
The TriggerTech Special single-stage flat trigger for Remington 700 right-hand rifles delivers the precision and consistency that long-range and competitive shooters demand. This drop-in trigger upgrades your accuracy potential with a true zero-creep break, minimal overtravel, and pull weights you can fine-tune from 1 to 3.5 lbs using an external set screw—no gunsmithing required. Most shooters report the break feeling roughly half a pound lighter than friction-based triggers at the same measured weight, making follow-up shots faster and more predictable.
Built on TriggerTech's Frictionless Release Technology, the Special uses hardened 440C stainless steel internals that resist corrosion and deliver shot-to-shot consistency that doesn't degrade over thousands of rounds. Because this design eliminates reliance on coatings, polishing, or lubrication at the critical engagement surfaces, you get reliability in harsh field conditions—whether you're on a cold mountain hunt or a hot range day—without the creep and inconsistency that plague traditional designs.
The externally accessible adjustment screw lets you dial in your preferred pull weight in roughly 1-ounce increments, giving you flexibility to match your shooting style or competitive requirements. This is a serious upgrade for Remington 700 shooters serious about accuracy.
| Manufacturer | TriggerTech |
| Model | Special Single-Stage Flat Trigger |
| Platform | Remington 700 (right-hand) |
| Part Number | R70SBB13TBF |
| Pull Weight Range | 1.0–3.5 lbs |
| Adjustment Increments | Approximately 1 oz |
| Trigger Type | Single-stage flat |
| Internal Material | Hardened 440C stainless steel |
| Installation | Drop-in (no gunsmithing required) |
Yes—the TriggerTech Special is designed as a drop-in replacement for right-hand Remington 700 rifles. No gunsmithing or modifications are needed.
Yes. The external set screw allows you to adjust pull weight from 1.0 to 3.5 lbs in roughly 1-ounce increments without disassembling the rifle.
The Special offers a crisp, zero-creep break with minimal overtravel. Most shooters report the break feeling approximately 0.5 lbs lighter than friction-based triggers at the same measured pull weight, making it noticeably faster and more predictable for follow-up shots and competitive shooting.
Overweight firing pin springs can cause pull weights to vary above the advertised range. If you're using a heavier-than-standard firing pin spring, verify compatibility or consult TriggerTech's guidelines for your specific setup.
SKU: 115817295 • Width: 5in • Height: 1.7in • Depth: 5.5in • Weight: 0.38oz