Triggertech115714552
TriggerTech Special Trigger for Remington 700 - Single Stage with Bolt Release Safety$244.99
Availability: In Stock
The TriggerTech Primary Trigger for Remington 700 is a single-stage drop-in replacement designed to tighten up shot-to-shot consistency and deliver a cleaner break than your factory trigger. If you're running a Rem 700 and want to sharpen your accuracy without replacing the whole action, this trigger leverages TriggerTech's Frictionless Release Technology to eliminate the creep and mushy feel that comes standard on most hunting and precision rifles. The result is a crisp, predictable let-off that most shooters feel is noticeably lighter than its measured pull weight—a real advantage when you're trying to drive a precise shot at distance or on the bench.
What makes the Primary stand out is the engineering behind that clean break. Instead of relying on polishing, coating, or lubrication to reduce friction—techniques that degrade over time and accumulate debris—TriggerTech's Frictionless Release Technology keeps the firing pin engagement surfaces mechanically optimized. That means your trigger feel stays consistent shot after shot, even after thousands of rounds, and even in mud, dust, or harsh field conditions. The hardened 440C stainless steel internals resist corrosion, so you get reliability and repeatability without the performance drift you'd see in lesser triggers.
Pull weight adjustment is external and tool-free: a single set screw lets you dial in anywhere from 1.5 to 4.0 pounds in 1-ounce increments with confidence. The bolt release safety is integrated, keeping the controls familiar if you're upgrading from a factory setup. One caveat worth knowing: pull weight can shift slightly if your rifle is running a heavier-than-stock firing pin spring, so keep that in mind if you're tuning for a specific let-off.
| Brand | TriggerTech |
| Model | Primary Trigger for Remington 700 |
| Type | Single Stage |
| Safety | Bolt Release Safety |
| Adjustable Pull Weight Range | 1.5–4.0 lbs |
| Adjustment Increments | 1 oz |
| Adjustment Method | External set screw (tool-free) |
| Internal Material | Hardened 440C stainless steel |
| Installation | Drop-in |
Yes, the TriggerTech Primary is designed as a drop-in replacement for Remington 700 models. No gunsmithing or modification should be required for installation.
Absolutely. Pull weight is adjusted via an externally accessible set screw and can be tuned anywhere from 1.5 to 4.0 pounds in 1-ounce increments without special tools.
The TriggerTech Primary delivers a crisper, cleaner break with zero creep and minimal over-travel. Most shooters report the pull feeling approximately 0.5 pounds lighter than the measured weight, thanks to the Frictionless Release Technology and the complete absence of creep.
Because TriggerTech's Frictionless Release Technology relies on mechanical design rather than coatings or lubrication, the trigger maintains consistent shot-to-shot feel even after thousands of rounds. The hardened 440C stainless steel components also resist corrosion in harsh conditions.
SKU: 115720581 • Width: 5in • Height: 1.7in • Depth: 5.3in • Weight: 0.38oz
Availability: In Stock
The TriggerTech Primary Trigger for Remington 700 is a single-stage drop-in replacement designed to tighten up shot-to-shot consistency and deliver a cleaner break than your factory trigger. If you're running a Rem 700 and want to sharpen your accuracy without replacing the whole action, this trigger leverages TriggerTech's Frictionless Release Technology to eliminate the creep and mushy feel that comes standard on most hunting and precision rifles. The result is a crisp, predictable let-off that most shooters feel is noticeably lighter than its measured pull weight—a real advantage when you're trying to drive a precise shot at distance or on the bench.
What makes the Primary stand out is the engineering behind that clean break. Instead of relying on polishing, coating, or lubrication to reduce friction—techniques that degrade over time and accumulate debris—TriggerTech's Frictionless Release Technology keeps the firing pin engagement surfaces mechanically optimized. That means your trigger feel stays consistent shot after shot, even after thousands of rounds, and even in mud, dust, or harsh field conditions. The hardened 440C stainless steel internals resist corrosion, so you get reliability and repeatability without the performance drift you'd see in lesser triggers.
Pull weight adjustment is external and tool-free: a single set screw lets you dial in anywhere from 1.5 to 4.0 pounds in 1-ounce increments with confidence. The bolt release safety is integrated, keeping the controls familiar if you're upgrading from a factory setup. One caveat worth knowing: pull weight can shift slightly if your rifle is running a heavier-than-stock firing pin spring, so keep that in mind if you're tuning for a specific let-off.
| Brand | TriggerTech |
| Model | Primary Trigger for Remington 700 |
| Type | Single Stage |
| Safety | Bolt Release Safety |
| Adjustable Pull Weight Range | 1.5–4.0 lbs |
| Adjustment Increments | 1 oz |
| Adjustment Method | External set screw (tool-free) |
| Internal Material | Hardened 440C stainless steel |
| Installation | Drop-in |
Yes, the TriggerTech Primary is designed as a drop-in replacement for Remington 700 models. No gunsmithing or modification should be required for installation.
Absolutely. Pull weight is adjusted via an externally accessible set screw and can be tuned anywhere from 1.5 to 4.0 pounds in 1-ounce increments without special tools.
The TriggerTech Primary delivers a crisper, cleaner break with zero creep and minimal over-travel. Most shooters report the pull feeling approximately 0.5 pounds lighter than the measured weight, thanks to the Frictionless Release Technology and the complete absence of creep.
Because TriggerTech's Frictionless Release Technology relies on mechanical design rather than coatings or lubrication, the trigger maintains consistent shot-to-shot feel even after thousands of rounds. The hardened 440C stainless steel components also resist corrosion in harsh conditions.
SKU: 115720581 • Width: 5in • Height: 1.7in • Depth: 5.3in • Weight: 0.38oz