Triggertech115730621
TriggerTech Mil-Spec AR-15 Single Stage Curved Bow Trigger - Black$134.99
Loading...
Loading...
Loading...
Availability: In Stock
The Triggertech Diamond AR-15 Curved Trigger in black brings 1911-style trigger control to your modern rifle. Built around Triggertech's Zero Creep Technology, this drop-in AR trigger delivers the crisp, predictable break that serious shooters demand—whether you're running a precision build, competing in 3-gun, or hunting at distance. The curved lever design fits naturally under your finger and pairs smooth two-stage staging with virtually no creep and minimal overtravel, giving you the trigger control you've tuned your shooting around.
What sets the Diamond apart is engineering that refuses to compromise. The short two-stage action is tuned to feel like a fine 1911, with a sub-0.030" tactical reset that lets you stay on target between shots. Hardened 440C stainless steel internals resist corrosion even in harsh conditions, and Triggertech's approach—relying on precision machining rather than coatings or lubrication—means your trigger pull stays consistent shot after shot, thousands of rounds deep. Pull weight ranges from 1.5 to 4.0 lbs, and because adjusting weight doesn't change hammer strike force, you get reliable primer ignition at any setting you choose.
This is a straightforward, honest trigger: mil-spec pinned, 7075 aluminum housing, and built to last. No gimmicks, no marketing noise—just the mechanical reliability and predictable performance that separates a trigger you trust from one you merely tolerate. Drop it in and shoot.
| Trigger Type | Two-Stage Short Action |
| Lever Style | Curved |
| Platform Compatibility | AR-15 and pump-action AR |
| Pull Weight Range | 1.5–4.0 lbs |
| First Stage Pull Weight | 0.25 lbs |
| Second Stage Pull Weight | 1.25–3.75 lbs |
| Creep | 0.000" |
| Overtravel | < 0.015" |
| Reset | < 0.030" (tactile mid-force) |
| Pin Size | Standard mil-spec 0.154" |
| Housing Material | 7075 Aluminum (anodized) |
| Internal Components | Hardened 440C Stainless Steel |
| Hammer Strike | Full |
| Warranty | Lifetime |
Yes, the Triggertech Diamond is a drop-in fit for standard AR-15 rifles and pump-action AR platforms. It uses mil-spec 0.154" pins (not included) and installs in minutes.
The trigger itself is included. Trigger pins are not included; you'll need standard mil-spec AR trigger pins to install it.
Yes. The Diamond's pull weight is adjustable from 1.5 to 4.0 lbs. Importantly, changing the pull weight does not affect hammer strike force, so you maintain reliable primer ignition at any weight you set.
Instead of relying on coatings, polishing, or lubrication, Triggertech uses precision machining of the trigger engagement surfaces to eliminate creep. This approach keeps your trigger pull consistent shot after shot, even after thousands of rounds, because there's nothing to wear, settle, or degrade over time.
SKU: 121687796 • Width: 4.2in • Height: 1.8in • Depth: 5.4in • Weight: 0.34oz
Availability: In Stock
The Triggertech Diamond AR-15 Curved Trigger in black brings 1911-style trigger control to your modern rifle. Built around Triggertech's Zero Creep Technology, this drop-in AR trigger delivers the crisp, predictable break that serious shooters demand—whether you're running a precision build, competing in 3-gun, or hunting at distance. The curved lever design fits naturally under your finger and pairs smooth two-stage staging with virtually no creep and minimal overtravel, giving you the trigger control you've tuned your shooting around.
What sets the Diamond apart is engineering that refuses to compromise. The short two-stage action is tuned to feel like a fine 1911, with a sub-0.030" tactical reset that lets you stay on target between shots. Hardened 440C stainless steel internals resist corrosion even in harsh conditions, and Triggertech's approach—relying on precision machining rather than coatings or lubrication—means your trigger pull stays consistent shot after shot, thousands of rounds deep. Pull weight ranges from 1.5 to 4.0 lbs, and because adjusting weight doesn't change hammer strike force, you get reliable primer ignition at any setting you choose.
This is a straightforward, honest trigger: mil-spec pinned, 7075 aluminum housing, and built to last. No gimmicks, no marketing noise—just the mechanical reliability and predictable performance that separates a trigger you trust from one you merely tolerate. Drop it in and shoot.
| Trigger Type | Two-Stage Short Action |
| Lever Style | Curved |
| Platform Compatibility | AR-15 and pump-action AR |
| Pull Weight Range | 1.5–4.0 lbs |
| First Stage Pull Weight | 0.25 lbs |
| Second Stage Pull Weight | 1.25–3.75 lbs |
| Creep | 0.000" |
| Overtravel | < 0.015" |
| Reset | < 0.030" (tactile mid-force) |
| Pin Size | Standard mil-spec 0.154" |
| Housing Material | 7075 Aluminum (anodized) |
| Internal Components | Hardened 440C Stainless Steel |
| Hammer Strike | Full |
| Warranty | Lifetime |
Yes, the Triggertech Diamond is a drop-in fit for standard AR-15 rifles and pump-action AR platforms. It uses mil-spec 0.154" pins (not included) and installs in minutes.
The trigger itself is included. Trigger pins are not included; you'll need standard mil-spec AR trigger pins to install it.
Yes. The Diamond's pull weight is adjustable from 1.5 to 4.0 lbs. Importantly, changing the pull weight does not affect hammer strike force, so you maintain reliable primer ignition at any weight you set.
Instead of relying on coatings, polishing, or lubrication, Triggertech uses precision machining of the trigger engagement surfaces to eliminate creep. This approach keeps your trigger pull consistent shot after shot, even after thousands of rounds, because there's nothing to wear, settle, or degrade over time.
SKU: 121687796 • Width: 4.2in • Height: 1.8in • Depth: 5.4in • Weight: 0.34oz