Tricer200188168
Tricer X1-Stri-1 Tricer-X1$999.00
Availability: In Stock
The Tricer-GC is a precision-machined rifle clamp purpose-built for hunters who demand rock-solid stability from a tripod rest. Milled from billet aluminum, this gun clamp locks your rifle down with zero flex—critical whether you're glassing from a distance, settling into a prone position, or making a long-range shot. The Arca-Swiss interface gives you seamless compatibility with modern tripod ecosystems, while the 3/8-16 threaded base works with virtually any standard tripod head on the market. At 9.2 ounces, it's light enough to pack deep into the backcountry but rigid enough to eliminate wobble that could cost you a clean shot.
Hunters running dedicated tripod setups—whether for Western mule deer, plains rifle work, or precision hunting from established glassing points—know that a rest is only as good as what clamps the rifle. The Tricer-GC eliminates the guesswork. Its billet construction and clean design reflect the philosophy that a hunting tool should work hard, look clean, and last. No plastic quick-detach mechanisms or lightweight gimcrackery; just solid metal doing what it's made to do.
The clamp's maximum width of 2 inches accommodates standard hunting rifle fore-ends and chassis systems. The Arca-Swiss slot opens compatibility to a growing universe of tripod heads, rail systems, and modular gear, so your investment scales with your kit as you upgrade. Whether you're running a carbon-fiber hunting tripod, a surveyor's model adapted for field shooting, or a compact backcountry platform, the Tricer-GC threads on and locks in.
| Weight | 9.2 oz |
| Maximum Width | 2 inches |
| Threading | 3/8-16 |
| Interface | Arca-Swiss compatible |
| Material | Billet machined aluminum |
The 3/8-16 threads fit any standard tripod head with a 3/8-16 stud. The Arca-Swiss slot adds compatibility with modern tripod platforms and heads that use the Arca interface, giving you broad options across hunting and precision shooting tripods.
The Tricer-GC has a maximum width of 2 inches, which accommodates standard hunting rifle fore-ends and modern chassis systems. If your rifle has an unusually thick or wide fore-end, verify against that dimension.
At 9.2 ounces, it's designed as a lightweight solution for hunters who pack tripod rests into remote terrain. The billet aluminum construction is rigid without unnecessary bulk.
The Tricer-GC is the clamp itself. Mounting hardware and threaded adaptors are not specified in the product information; verify what fasteners or adapters you may need for your specific tripod setup.
SKU: 200188653 • Width: 4.5in • Height: 3.9in • Depth: 5.6in • Weight: 0.75oz
Availability: In Stock
The Tricer-GC is a precision-machined rifle clamp purpose-built for hunters who demand rock-solid stability from a tripod rest. Milled from billet aluminum, this gun clamp locks your rifle down with zero flex—critical whether you're glassing from a distance, settling into a prone position, or making a long-range shot. The Arca-Swiss interface gives you seamless compatibility with modern tripod ecosystems, while the 3/8-16 threaded base works with virtually any standard tripod head on the market. At 9.2 ounces, it's light enough to pack deep into the backcountry but rigid enough to eliminate wobble that could cost you a clean shot.
Hunters running dedicated tripod setups—whether for Western mule deer, plains rifle work, or precision hunting from established glassing points—know that a rest is only as good as what clamps the rifle. The Tricer-GC eliminates the guesswork. Its billet construction and clean design reflect the philosophy that a hunting tool should work hard, look clean, and last. No plastic quick-detach mechanisms or lightweight gimcrackery; just solid metal doing what it's made to do.
The clamp's maximum width of 2 inches accommodates standard hunting rifle fore-ends and chassis systems. The Arca-Swiss slot opens compatibility to a growing universe of tripod heads, rail systems, and modular gear, so your investment scales with your kit as you upgrade. Whether you're running a carbon-fiber hunting tripod, a surveyor's model adapted for field shooting, or a compact backcountry platform, the Tricer-GC threads on and locks in.
| Weight | 9.2 oz |
| Maximum Width | 2 inches |
| Threading | 3/8-16 |
| Interface | Arca-Swiss compatible |
| Material | Billet machined aluminum |
The 3/8-16 threads fit any standard tripod head with a 3/8-16 stud. The Arca-Swiss slot adds compatibility with modern tripod platforms and heads that use the Arca interface, giving you broad options across hunting and precision shooting tripods.
The Tricer-GC has a maximum width of 2 inches, which accommodates standard hunting rifle fore-ends and modern chassis systems. If your rifle has an unusually thick or wide fore-end, verify against that dimension.
At 9.2 ounces, it's designed as a lightweight solution for hunters who pack tripod rests into remote terrain. The billet aluminum construction is rigid without unnecessary bulk.
The Tricer-GC is the clamp itself. Mounting hardware and threaded adaptors are not specified in the product information; verify what fasteners or adapters you may need for your specific tripod setup.
SKU: 200188653 • Width: 4.5in • Height: 3.9in • Depth: 5.6in • Weight: 0.75oz