Availability: In Stock
The Traditions Pursuit XT 50 Cal Muzzleloader is a modern inline built for hunters who want straightforward accuracy and reliability without needless complexity. Chambered in 50 caliber and fitted with a 26-inch chromoly steel barrel, this muzzleloader balances weight—just 5.75 pounds—with the strength needed for consistent performance out to 200+ yards. The Burnt Bronze Cerakote finish on the barrel resists corrosion in field conditions, while the Veil Wideland synthetic stock offers a non-slip grip and wider forend for steady hand position whether you're shooting from a bench or in the field.
What sets the Pursuit XT apart is its VAPR 1:24 twist rifling, a faster twist than many mid-level muzzleloaders, designed to stabilize a wider range of modern projectiles and improve accuracy. The gun runs on 209 shotgun primers—a reliable ignition source that's easy to source—and the Accelerator Breech Plug works with both loose powder and pelletized powder, giving you flexibility in how you load. The Elite XT trigger system delivers a crisp, predictable pull without excessive take-up, and a dual safety setup (internal hammer block and trigger block) keeps things secure until you're ready to fire.
Loading is straightforward thanks to the Quick-T Ramrod Handle, which works like both a T-handle and palm saver rolled into one. The same ramrod handle screws on a brass jag and doubles as your cleaning rod, so you're not juggling multiple tools afield. The gun comes drilled and tapped for mounting an optic, and sling swivel studs are already installed. Recoil is managed by a Quick Relief Recoil Pad, and the fast-action release button makes getting to your powder charge quick and repeatable.
The Pursuit XT sits squarely in the middle ground of modern muzzleloading—enough features and refinement to support serious hunting, but simple enough that you're not troubleshooting gadgets instead of practicing. It's the kind of rifle that rewards fieldcraft and good shooting form rather than hype.
| Caliber | 50 caliber |
| Barrel Length | 26 inches |
| Barrel Material | Chromoly steel, ultralight tapered fluted |
| Barrel Finish | Burnt Bronze Cerakote |
| Rifling Twist | VAPR 1:24 |
| Ignition System | 209 shotgun primer |
| Breech Plug | Accelerator (accepts loose and pelletized powder) |
| Trigger | Elite XT with rebounding hammer and dual safety |
| Stock Material | Veil Wideland synthetic |
| Frame | LT-1 alloy |
| Weight | 5.75 pounds |
| Ramrod | Solid aluminum with Quick-T handle |
| Scope Mounting | Drilled and tapped |
| Sling Studs | Yes, ambidextrous |
| Recoil Pad | Quick Relief Recoil Pad |
The Accelerator Breech Plug handles both loose black powder and pelletized powder, so you can use whichever you prefer. The 1:24 twist rifling was designed to stabilize a wide range of modern 50-caliber projectiles. Traditions recommends trying the Smackdown Carnivore 250-grain bullet in this rifle.
Yes. The Pursuit XT is drilled and tapped for scope mounting, and comes ready to accept rings and rings of your choice.
The Pursuit XT is built for hunters. At 5.75 pounds, it's light enough to carry all day, and it's capable of accurate shots out to 200+ yards when properly loaded and sighted. The synthetic stock and Cerakote finish are suited to field use and are easy to clean and maintain.
The rifle comes with a solid aluminum ramrod fitted with the Quick-T Handle, a T-shaped grip that functions as both a palm saver and T-handle. The handle can be removed and a brass jag can be screwed on, converting the ramrod into a cleaning rod.
SKU: 115653821 • Width: 8.5in • Height: 3.5in • Depth: 46.5in • Weight: 7.74oz
Availability: In Stock
The Traditions Pursuit XT 50 Cal Muzzleloader is a modern inline built for hunters who want straightforward accuracy and reliability without needless complexity. Chambered in 50 caliber and fitted with a 26-inch chromoly steel barrel, this muzzleloader balances weight—just 5.75 pounds—with the strength needed for consistent performance out to 200+ yards. The Burnt Bronze Cerakote finish on the barrel resists corrosion in field conditions, while the Veil Wideland synthetic stock offers a non-slip grip and wider forend for steady hand position whether you're shooting from a bench or in the field.
What sets the Pursuit XT apart is its VAPR 1:24 twist rifling, a faster twist than many mid-level muzzleloaders, designed to stabilize a wider range of modern projectiles and improve accuracy. The gun runs on 209 shotgun primers—a reliable ignition source that's easy to source—and the Accelerator Breech Plug works with both loose powder and pelletized powder, giving you flexibility in how you load. The Elite XT trigger system delivers a crisp, predictable pull without excessive take-up, and a dual safety setup (internal hammer block and trigger block) keeps things secure until you're ready to fire.
Loading is straightforward thanks to the Quick-T Ramrod Handle, which works like both a T-handle and palm saver rolled into one. The same ramrod handle screws on a brass jag and doubles as your cleaning rod, so you're not juggling multiple tools afield. The gun comes drilled and tapped for mounting an optic, and sling swivel studs are already installed. Recoil is managed by a Quick Relief Recoil Pad, and the fast-action release button makes getting to your powder charge quick and repeatable.
The Pursuit XT sits squarely in the middle ground of modern muzzleloading—enough features and refinement to support serious hunting, but simple enough that you're not troubleshooting gadgets instead of practicing. It's the kind of rifle that rewards fieldcraft and good shooting form rather than hype.
| Caliber | 50 caliber |
| Barrel Length | 26 inches |
| Barrel Material | Chromoly steel, ultralight tapered fluted |
| Barrel Finish | Burnt Bronze Cerakote |
| Rifling Twist | VAPR 1:24 |
| Ignition System | 209 shotgun primer |
| Breech Plug | Accelerator (accepts loose and pelletized powder) |
| Trigger | Elite XT with rebounding hammer and dual safety |
| Stock Material | Veil Wideland synthetic |
| Frame | LT-1 alloy |
| Weight | 5.75 pounds |
| Ramrod | Solid aluminum with Quick-T handle |
| Scope Mounting | Drilled and tapped |
| Sling Studs | Yes, ambidextrous |
| Recoil Pad | Quick Relief Recoil Pad |
The Accelerator Breech Plug handles both loose black powder and pelletized powder, so you can use whichever you prefer. The 1:24 twist rifling was designed to stabilize a wide range of modern 50-caliber projectiles. Traditions recommends trying the Smackdown Carnivore 250-grain bullet in this rifle.
Yes. The Pursuit XT is drilled and tapped for scope mounting, and comes ready to accept rings and rings of your choice.
The Pursuit XT is built for hunters. At 5.75 pounds, it's light enough to carry all day, and it's capable of accurate shots out to 200+ yards when properly loaded and sighted. The synthetic stock and Cerakote finish are suited to field use and are easy to clean and maintain.
The rifle comes with a solid aluminum ramrod fitted with the Quick-T Handle, a T-shaped grip that functions as both a palm saver and T-handle. The handle can be removed and a brass jag can be screwed on, converting the ramrod into a cleaning rod.
SKU: 115653821 • Width: 8.5in • Height: 3.5in • Depth: 46.5in • Weight: 7.74oz