$635.01
Loading...
Loading...
Loading...
Availability: In Stock
The Traditions NitroFire Pro .50 Cal Muzzleloader in Veil Alpine Camo brings modern engineering to in-line muzzleloading. Built on the NitroFire platform that partnered Federal Premium and Hodgdon to reimagine the category, this rifle combines innovative ignition technology with a genuinely customizable fit. If you hunt elk, deer, or other big game and want a muzzleloader that loads faster, shoots cleaner, and adapts to your frame, this is worth a hard look.
The standout feature is the Federal Premium Firestick encapsulated powder charge system. Load the polymer-encased Hodgdon Triple Eight powder charge from the breech, seat your bullet at the muzzle, then fire with a standard 209 shotgun primer. It's faster than traditional loose powder, weather-sealed against moisture, and engineered to the same tolerances as factory ammunition. The Speed Load System centers the bullet perfectly in the rifling for consistent accuracy and makes unloading a non-event if you don't get a shot.
The NitroFire Pro adds three game-changing adjustments: an adjustable cheekpiece (turn a screw to dial height), adjustable length of pull (swap spacers to fit your frame), and a threaded barrel (ready for a muzzle brake). The 26-inch Chromoly steel barrel is fluted, tapered, and topped with premium Cerakote finish. A 1:24 VAPR twist rate stabilizes bullets and opens options beyond traditional conical loads. The Elite XT trigger breaks clean with a rebounding hammer and cross-block safety. Scope-ready and sight-ready from the factory with solid aluminum ramrod and Quick-T handle included.
Veil Alpine Camo delivers proven concealment in high-country terrain—sharp enough to break up your outline, subdued enough for most hunting situations. This is a .50 caliber rifle built for serious hunters who want modern convenience without gimmicks.
| Caliber | .50 |
| Ignition System | 209 shotgun primer |
| Barrel Length | 26 inches |
| Barrel Material | Chromoly steel, fluted and tapered |
| Barrel Finish | Premium Cerakote |
| Twist Rate | 1:24 VAPR |
| Trigger | Elite XT (rebounding hammer, cross-block safety) |
| Scope/Sight Mounting | Drilled and tapped |
| Adjustable Cheekpiece | Yes |
| Adjustable Length of Pull | Yes |
| Barrel Threading | Threaded for muzzle brake |
| Ramrod | Solid aluminum with Quick-T handle |
| Finish | Veil Alpine Camo |
The NitroFire Pro uses Federal Premium Firestick encapsulated powder charges loaded from the breech and bullets loaded from the muzzle. You'll also need 209 shotgun primers (not included). The 1:24 twist rate stabilizes a range of bullet options.
Yes. The adjustable cheekpiece can be raised or lowered with a simple screw adjustment, and the adjustable length of pull uses removable spacers to customize stock length. Both adjustments are designed to improve comfort and shooting position.
Yes. The threaded barrel is ready to accept a muzzle brake, which can help reduce recoil and improve control.
Yes. The receiver is drilled and tapped for a scope mount. It's also drilled and tapped for open sights if you prefer iron sight hunting.
SKU: 126512190
Availability: In Stock
The Traditions NitroFire Pro .50 Cal Muzzleloader in Veil Alpine Camo brings modern engineering to in-line muzzleloading. Built on the NitroFire platform that partnered Federal Premium and Hodgdon to reimagine the category, this rifle combines innovative ignition technology with a genuinely customizable fit. If you hunt elk, deer, or other big game and want a muzzleloader that loads faster, shoots cleaner, and adapts to your frame, this is worth a hard look.
The standout feature is the Federal Premium Firestick encapsulated powder charge system. Load the polymer-encased Hodgdon Triple Eight powder charge from the breech, seat your bullet at the muzzle, then fire with a standard 209 shotgun primer. It's faster than traditional loose powder, weather-sealed against moisture, and engineered to the same tolerances as factory ammunition. The Speed Load System centers the bullet perfectly in the rifling for consistent accuracy and makes unloading a non-event if you don't get a shot.
The NitroFire Pro adds three game-changing adjustments: an adjustable cheekpiece (turn a screw to dial height), adjustable length of pull (swap spacers to fit your frame), and a threaded barrel (ready for a muzzle brake). The 26-inch Chromoly steel barrel is fluted, tapered, and topped with premium Cerakote finish. A 1:24 VAPR twist rate stabilizes bullets and opens options beyond traditional conical loads. The Elite XT trigger breaks clean with a rebounding hammer and cross-block safety. Scope-ready and sight-ready from the factory with solid aluminum ramrod and Quick-T handle included.
Veil Alpine Camo delivers proven concealment in high-country terrain—sharp enough to break up your outline, subdued enough for most hunting situations. This is a .50 caliber rifle built for serious hunters who want modern convenience without gimmicks.
| Caliber | .50 |
| Ignition System | 209 shotgun primer |
| Barrel Length | 26 inches |
| Barrel Material | Chromoly steel, fluted and tapered |
| Barrel Finish | Premium Cerakote |
| Twist Rate | 1:24 VAPR |
| Trigger | Elite XT (rebounding hammer, cross-block safety) |
| Scope/Sight Mounting | Drilled and tapped |
| Adjustable Cheekpiece | Yes |
| Adjustable Length of Pull | Yes |
| Barrel Threading | Threaded for muzzle brake |
| Ramrod | Solid aluminum with Quick-T handle |
| Finish | Veil Alpine Camo |
The NitroFire Pro uses Federal Premium Firestick encapsulated powder charges loaded from the breech and bullets loaded from the muzzle. You'll also need 209 shotgun primers (not included). The 1:24 twist rate stabilizes a range of bullet options.
Yes. The adjustable cheekpiece can be raised or lowered with a simple screw adjustment, and the adjustable length of pull uses removable spacers to customize stock length. Both adjustments are designed to improve comfort and shooting position.
Yes. The threaded barrel is ready to accept a muzzle brake, which can help reduce recoil and improve control.
Yes. The receiver is drilled and tapped for a scope mount. It's also drilled and tapped for open sights if you prefer iron sight hunting.
SKU: 126512190