Sig Sauer167513816
Sig Sauer 8901267 Mcx/Mpx Polymer Black Skeletonized$36.25
Loading...
Loading...
Loading...
Availability: In Stock
Current Stock: Out of stock
If you run a Sig Sauer MCX or MPX, you already know these platforms reward hands-on maintenance and customization. The Fix It Sticks Tool Kit for Sig Sauer MCX & MPX puts the essential gunsmithing tools you'll actually reach for into one compact, organized package. This isn't a drawer full of random bits—it's a purpose-built kit that covers field adjustments, component replacement, and routine maintenance without forcing you to hunt through your toolbox.
The kit centers on precision and control. A ratcheting T-way wrench with locking hex drive gives you leverage on stubborn fasteners, while the all-in-one torque driver (15–65 inch-lbs) lets you apply the right force without guessing or over-tightening and damaging your gun. The locking hex extension reaches into tight spaces, and the 1/2" socket and bit adapter expands your options. When you need non-marring impact work, the brass hammer head protects your finish. Six steel pin punches (1/16" through 1/4") and three roll pin punches (1/16", 1/8", 5/64") handle both standard and roll pin removal and installation with precision.
Fastener variety matters, and this kit acknowledges it: eleven 1/4" bits cover Torx (T10, T15, T25, T27), hex (0.050", 1/8", 5/32"), Phillips (P1, P2), and slotted (3/32", 3/16") heads. A magnetic patch corrals small screws and springs during disassembly so nothing disappears into the shop floor. Everything lives in a soft carrying case sized for the range or field, and you get an MCX/MPX patch for the gear bag.
This is the kind of kit that earns a permanent spot in your range bag or truck—small and light enough to carry, complete enough that you won't improvise with the wrong tool.
| Brand | Fix It Sticks |
| Designed For | Sig Sauer MCX & MPX |
| Torque Driver Range | 15–65 inch-lbs |
| Included Bits | Eleven 1/4" (Torx, hex, Phillips, slotted) |
| Pin Punches | Six steel (1/16"–1/4"), three roll pin (1/16", 1/8", 5/64") |
| Case Length | 6.5" |
| Case Width | 3.75" |
| Case Height | 2.0" |
| Weight | 1.188 lbs |
Yes. The Fix It Sticks Tool Kit for Sig Sauer MCX & MPX is designed to handle maintenance and adjustments on both platforms.
The kit comes with eleven 1/4" bits: Torx (T10, T15, T25, T27), hex (0.050", 1/8", 5/32"), Phillips (P1, P2), and slotted (3/32", 3/16"). This covers the fasteners you'll encounter on field stripping, optic mounting, and component adjustments.
Both. The soft carrying case is sized for portability, making it easy to take to the range or keep in your truck or pack. The compact dimensions (6.5" × 3.75" × 2.0") and 1.188 lb weight make it practical for fieldwork.
The all-in-one torque driver handles 15–65 inch-lbs, giving you precision control across the fasteners you'll encounter on MCX and MPX builds and maintenance.
SKU: 167528582 • Weight: 1.31oz
Availability: In Stock
Current Stock: Out of stock
If you run a Sig Sauer MCX or MPX, you already know these platforms reward hands-on maintenance and customization. The Fix It Sticks Tool Kit for Sig Sauer MCX & MPX puts the essential gunsmithing tools you'll actually reach for into one compact, organized package. This isn't a drawer full of random bits—it's a purpose-built kit that covers field adjustments, component replacement, and routine maintenance without forcing you to hunt through your toolbox.
The kit centers on precision and control. A ratcheting T-way wrench with locking hex drive gives you leverage on stubborn fasteners, while the all-in-one torque driver (15–65 inch-lbs) lets you apply the right force without guessing or over-tightening and damaging your gun. The locking hex extension reaches into tight spaces, and the 1/2" socket and bit adapter expands your options. When you need non-marring impact work, the brass hammer head protects your finish. Six steel pin punches (1/16" through 1/4") and three roll pin punches (1/16", 1/8", 5/64") handle both standard and roll pin removal and installation with precision.
Fastener variety matters, and this kit acknowledges it: eleven 1/4" bits cover Torx (T10, T15, T25, T27), hex (0.050", 1/8", 5/32"), Phillips (P1, P2), and slotted (3/32", 3/16") heads. A magnetic patch corrals small screws and springs during disassembly so nothing disappears into the shop floor. Everything lives in a soft carrying case sized for the range or field, and you get an MCX/MPX patch for the gear bag.
This is the kind of kit that earns a permanent spot in your range bag or truck—small and light enough to carry, complete enough that you won't improvise with the wrong tool.
| Brand | Fix It Sticks |
| Designed For | Sig Sauer MCX & MPX |
| Torque Driver Range | 15–65 inch-lbs |
| Included Bits | Eleven 1/4" (Torx, hex, Phillips, slotted) |
| Pin Punches | Six steel (1/16"–1/4"), three roll pin (1/16", 1/8", 5/64") |
| Case Length | 6.5" |
| Case Width | 3.75" |
| Case Height | 2.0" |
| Weight | 1.188 lbs |
Yes. The Fix It Sticks Tool Kit for Sig Sauer MCX & MPX is designed to handle maintenance and adjustments on both platforms.
The kit comes with eleven 1/4" bits: Torx (T10, T15, T25, T27), hex (0.050", 1/8", 5/32"), Phillips (P1, P2), and slotted (3/32", 3/16"). This covers the fasteners you'll encounter on field stripping, optic mounting, and component adjustments.
Both. The soft carrying case is sized for portability, making it easy to take to the range or keep in your truck or pack. The compact dimensions (6.5" × 3.75" × 2.0") and 1.188 lb weight make it practical for fieldwork.
The all-in-one torque driver handles 15–65 inch-lbs, giving you precision control across the fasteners you'll encounter on MCX and MPX builds and maintenance.
SKU: 167528582 • Weight: 1.31oz