
Availability: In Stock
The TenPoint Acu-X Lighted RD carbon arrows are purpose-built for TenPoint's rail-less reverse-draw crossbows, combining precision engineering with shot-tracking convenience. These 20-inch arrows integrate a lighted snap-on nock that activates automatically when you fire—the bowstring fully engages the nock and powers the LED, giving you superior flight visibility out to extended range. The light stays active for roughly 24 hours of use, and you can deactivate it anytime by pulling the nock straight out with your fingers or a perfect puller (sold separately).
Built on a high-performance carbon shaft, each Acu-X RD arrow is manufactured using TenPoint's precision spine-indexing process, which aligns the arrow spine in the exact configuration proven to perform best with rail-less reverse-draw platforms. This consistency—combined with strict quality control (each arrow checked to .001" straightness and grain-matched within 1 grain per arrow)—delivers the accuracy and repeatability you need for hunting or target shooting at distance. The 16.5% front-of-center balance and industry-standard 2 Blazer vanes further enhance stability and shot-to-shot grouping.
The innovative snap-on nock design delivers an unmistakable audible click when it locks onto your bowstring, eliminating lateral nock travel during the shot cycle. This secure, repeatable engagement preserves your bowstring's serving life while maximizing precision. Each arrow ships with a 100-grain field point included, and the package arrives grain-matched and factory-inspected, ready to shoot.
| Length | 20 inches |
| Weight | 440 grains ±1 grain (with 100-grain field point) |
| Straightness | .001 inch |
| Vane | 2 Blazer |
| Front-of-Center (F.O.C.) | 16.5% |
| Nock Type | Acu-X Snap-On Lighted Nock (29 grains) |
| Insert | 92-grain brass |
| Inside Diameter | .297 inch |
| Outside Diameter | .344 inch |
| LED Light Duration | Approximately 24 hours when activated |
| Crossbow Compatibility | TenPoint rail-less reverse-draw crossbows only |
| Package | 36-pack |
No. The Acu-X Lighted RD arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. They use a precision spine-indexing process specific to those platforms and the snap-on nock is engineered for that bowstring engagement system.
The light activates automatically when you fire—the bowstring pushes the nock fully into the bushing and powers the LED. To deactivate it, simply grip the nock and pull it straight out with your fingers or a Bednar Perfect Puller (sold separately) until the light turns off. You can reactivate it anytime by reinserting the nock.
Each 36-pack of Acu-X Lighted RD arrows comes with a 100-grain field point on each arrow. The nock itself is the Acu-X Snap-On Lighted model with an integrated LED.
The LED light is rated for approximately 24 hours of active use. Since you activate and deactivate the light as needed, the actual lifespan depends on how much you use it during your shooting sessions.

SKU: 200187844 • Weight: 0.54oz





Availability: In Stock
The TenPoint Acu-X Lighted RD carbon arrows are purpose-built for TenPoint's rail-less reverse-draw crossbows, combining precision engineering with shot-tracking convenience. These 20-inch arrows integrate a lighted snap-on nock that activates automatically when you fire—the bowstring fully engages the nock and powers the LED, giving you superior flight visibility out to extended range. The light stays active for roughly 24 hours of use, and you can deactivate it anytime by pulling the nock straight out with your fingers or a perfect puller (sold separately).
Built on a high-performance carbon shaft, each Acu-X RD arrow is manufactured using TenPoint's precision spine-indexing process, which aligns the arrow spine in the exact configuration proven to perform best with rail-less reverse-draw platforms. This consistency—combined with strict quality control (each arrow checked to .001" straightness and grain-matched within 1 grain per arrow)—delivers the accuracy and repeatability you need for hunting or target shooting at distance. The 16.5% front-of-center balance and industry-standard 2 Blazer vanes further enhance stability and shot-to-shot grouping.
The innovative snap-on nock design delivers an unmistakable audible click when it locks onto your bowstring, eliminating lateral nock travel during the shot cycle. This secure, repeatable engagement preserves your bowstring's serving life while maximizing precision. Each arrow ships with a 100-grain field point included, and the package arrives grain-matched and factory-inspected, ready to shoot.
| Length | 20 inches |
| Weight | 440 grains ±1 grain (with 100-grain field point) |
| Straightness | .001 inch |
| Vane | 2 Blazer |
| Front-of-Center (F.O.C.) | 16.5% |
| Nock Type | Acu-X Snap-On Lighted Nock (29 grains) |
| Insert | 92-grain brass |
| Inside Diameter | .297 inch |
| Outside Diameter | .344 inch |
| LED Light Duration | Approximately 24 hours when activated |
| Crossbow Compatibility | TenPoint rail-less reverse-draw crossbows only |
| Package | 36-pack |
No. The Acu-X Lighted RD arrows are designed exclusively for TenPoint rail-less reverse-draw crossbows. They use a precision spine-indexing process specific to those platforms and the snap-on nock is engineered for that bowstring engagement system.
The light activates automatically when you fire—the bowstring pushes the nock fully into the bushing and powers the LED. To deactivate it, simply grip the nock and pull it straight out with your fingers or a Bednar Perfect Puller (sold separately) until the light turns off. You can reactivate it anytime by reinserting the nock.
Each 36-pack of Acu-X Lighted RD arrows comes with a 100-grain field point on each arrow. The nock itself is the Acu-X Snap-On Lighted model with an integrated LED.
The LED light is rated for approximately 24 hours of active use. Since you activate and deactivate the light as needed, the actual lifespan depends on how much you use it during your shooting sessions.
SKU: 200187844 • Weight: 0.54oz
