Tapco167516821
Tapco 10/22 Muzzle Brake Slvr22 Lr$39.99
Availability: In Stock
The Tapco 10/22 Muzzle Brake is a compact, lightweight solution for shooters looking to reduce recoil and muzzle rise on rimfire rifles. Built from anodized aluminum in a distinctive gold finish, this muzzle brake threads directly onto your .22 LR barrel with standard 1/2"x28 threads, making it a straightforward add-on for any compatible 10/22 or similar platform. At just 2 inches long and 0.920 inches in diameter, it's proportionate to the modest profile of a .22 rifle while managing the minor impulse that even light cartridges produce on precision shooting or rapid-fire applications.
Muzzle brakes work by redirecting propellant gases outward and rearward, countering the upward flip that occurs when you fire. Even on a cartridge as gentle as the .22 LR, this benefit shows up most in fast shooting, low-light conditions, or when training new shooters who benefit from faster target reacquisition. The gold anodizing provides a clean, corrosion-resistant finish that stands up to field use and makes your rifle stand out on the range.
Installation is simple: verify your barrel's thread pitch (1/2"x28 is standard for most 10/22 variants), check that the brake seats properly, and you're ready to shoot. The compact design keeps your overall rifle length modest, so it won't interfere with handling or storage. Whether you're running a factory 10/22, a tactical trainer, or a customized rimfire platform, this Tapco brake is a practical choice for shooters who want a touch more control without bulk or complication.
| Brand | Tapco |
| Caliber | .22 LR |
| Material | Anodized Aluminum |
| Finish | Gold Anodized |
| Thread Pitch | 1/2"x28 |
| Overall Length | 2 inches |
| Diameter | 0.920 inches |
Yes, provided your barrel has standard 1/2"x28 threads. Most factory and aftermarket 10/22 barrels use this thread pitch. Check your barrel or consult your rifle's documentation if you're unsure.
The .22 LR is a low-recoil cartridge, so the absolute reduction is modest. The real benefit is faster muzzle rise recovery and easier target reacquisition during rapid fire or low-light shooting, where even small advantages in sight picture retention matter.
Yes. The gold anodize is a hard aluminum oxide coating that resists corrosion, wear, and weathering. It will develop a patina over time with field use, which adds character while maintaining protection.
The Tapco 10/22 Muzzle Brake is sold as the brake component only. Installation requires no special tools beyond a properly fitting wrench or spanner to tighten it onto your barrel threads.
SKU: 167516792 • Width: 1.3in • Height: 1.3in • Depth: 4in • Weight: 0.1oz
Availability: In Stock
The Tapco 10/22 Muzzle Brake is a compact, lightweight solution for shooters looking to reduce recoil and muzzle rise on rimfire rifles. Built from anodized aluminum in a distinctive gold finish, this muzzle brake threads directly onto your .22 LR barrel with standard 1/2"x28 threads, making it a straightforward add-on for any compatible 10/22 or similar platform. At just 2 inches long and 0.920 inches in diameter, it's proportionate to the modest profile of a .22 rifle while managing the minor impulse that even light cartridges produce on precision shooting or rapid-fire applications.
Muzzle brakes work by redirecting propellant gases outward and rearward, countering the upward flip that occurs when you fire. Even on a cartridge as gentle as the .22 LR, this benefit shows up most in fast shooting, low-light conditions, or when training new shooters who benefit from faster target reacquisition. The gold anodizing provides a clean, corrosion-resistant finish that stands up to field use and makes your rifle stand out on the range.
Installation is simple: verify your barrel's thread pitch (1/2"x28 is standard for most 10/22 variants), check that the brake seats properly, and you're ready to shoot. The compact design keeps your overall rifle length modest, so it won't interfere with handling or storage. Whether you're running a factory 10/22, a tactical trainer, or a customized rimfire platform, this Tapco brake is a practical choice for shooters who want a touch more control without bulk or complication.
| Brand | Tapco |
| Caliber | .22 LR |
| Material | Anodized Aluminum |
| Finish | Gold Anodized |
| Thread Pitch | 1/2"x28 |
| Overall Length | 2 inches |
| Diameter | 0.920 inches |
Yes, provided your barrel has standard 1/2"x28 threads. Most factory and aftermarket 10/22 barrels use this thread pitch. Check your barrel or consult your rifle's documentation if you're unsure.
The .22 LR is a low-recoil cartridge, so the absolute reduction is modest. The real benefit is faster muzzle rise recovery and easier target reacquisition during rapid fire or low-light shooting, where even small advantages in sight picture retention matter.
Yes. The gold anodize is a hard aluminum oxide coating that resists corrosion, wear, and weathering. It will develop a patina over time with field use, which adds character while maintaining protection.
The Tapco 10/22 Muzzle Brake is sold as the brake component only. Installation requires no special tools beyond a properly fitting wrench or spanner to tighten it onto your barrel threads.
SKU: 167516792 • Width: 1.3in • Height: 1.3in • Depth: 4in • Weight: 0.1oz