Talley Manufacturing197559278
Talley Manufacturing Mauser 98, Blue$31.64
Availability: In Stock
If you're mounting a scope on a classic Mauser 98 with a large ring, the Talley Manufacturing 1'' Low Scope Mount offers a clean, rigid alternative to the traditional two-piece base-and-ring setup. This one-piece scope mount integrates the ring and base into a single unit, engineered by renowned gunsmith Mel Forbes of New Ultralight Arms. That unified construction delivers real advantages: it cuts parasitic weight without sacrificing rigidity, and it eliminates the potential weak point where a separate ring meets a base.
The design centers on robust ring caps that span 5/8 inch wide and are secured with four TORX screws, providing plenty of clamping force to lock down larger optics and prevent the drift and shift that can accumulate through recoil and handling. The low mounting height positions your scope as close to the bore axis as practical, which can improve sight radius and reduce the apparent jump between your scope picture and iron sights—useful for hunters who like a backup aiming reference or prefer a lower, snappier sight picture.
This is purpose-built gear for shooters who understand their rifle's platform and want a mount that matches the precision and durability of a quality Mauser action. Whether you're setting up a hunting rifle, a target gun, or a scout-rifle-style setup, a one-piece mount from a maker with deep experience in ultralight and precision rifles deserves serious consideration.
| Manufacturer | Talley Manufacturing |
| Rifle Platform | Mauser 98 Large Ring |
| Tube Diameter | 1 inch |
| Mount Height | Low |
| Construction | One-piece (integrated ring and base) |
| Ring Cap Width | 5/8 inch |
| Fastener Type | TORX screws (four per ring cap) |
This mount is designed specifically for Mauser 98 actions with large rings. Verify your rifle's ring size before ordering—small ring Mauser 98s require a different mount.
No. This mount is designed for 1-inch scope tubes only. If your scope has a 30mm tube, you'll need a different mount.
A one-piece design eliminates the joint where a separate ring connects to the base, which is a potential source of movement. It also reduces overall weight while maintaining or improving rigidity compared to a two-piece system.
The product details don't specify torque values. Contact Talley Manufacturing or consult your rifle's manual for the recommended fastener tension to avoid over-tightening or under-clamping your scope.
SKU: 197559259 • Weight: 0.05oz
Availability: In Stock
If you're mounting a scope on a classic Mauser 98 with a large ring, the Talley Manufacturing 1'' Low Scope Mount offers a clean, rigid alternative to the traditional two-piece base-and-ring setup. This one-piece scope mount integrates the ring and base into a single unit, engineered by renowned gunsmith Mel Forbes of New Ultralight Arms. That unified construction delivers real advantages: it cuts parasitic weight without sacrificing rigidity, and it eliminates the potential weak point where a separate ring meets a base.
The design centers on robust ring caps that span 5/8 inch wide and are secured with four TORX screws, providing plenty of clamping force to lock down larger optics and prevent the drift and shift that can accumulate through recoil and handling. The low mounting height positions your scope as close to the bore axis as practical, which can improve sight radius and reduce the apparent jump between your scope picture and iron sights—useful for hunters who like a backup aiming reference or prefer a lower, snappier sight picture.
This is purpose-built gear for shooters who understand their rifle's platform and want a mount that matches the precision and durability of a quality Mauser action. Whether you're setting up a hunting rifle, a target gun, or a scout-rifle-style setup, a one-piece mount from a maker with deep experience in ultralight and precision rifles deserves serious consideration.
| Manufacturer | Talley Manufacturing |
| Rifle Platform | Mauser 98 Large Ring |
| Tube Diameter | 1 inch |
| Mount Height | Low |
| Construction | One-piece (integrated ring and base) |
| Ring Cap Width | 5/8 inch |
| Fastener Type | TORX screws (four per ring cap) |
This mount is designed specifically for Mauser 98 actions with large rings. Verify your rifle's ring size before ordering—small ring Mauser 98s require a different mount.
No. This mount is designed for 1-inch scope tubes only. If your scope has a 30mm tube, you'll need a different mount.
A one-piece design eliminates the joint where a separate ring connects to the base, which is a potential source of movement. It also reduces overall weight while maintaining or improving rigidity compared to a two-piece system.
The product details don't specify torque values. Contact Talley Manufacturing or consult your rifle's manual for the recommended fastener tension to avoid over-tightening or under-clamping your scope.
SKU: 197559259 • Weight: 0.05oz