Talley Manufacturing114462292
Talley Lightweight 2-Piece Scope Mount with Integral 30mm Rings, High - Browning X-Bolt Hell's Canyon$84.89
Availability: In Stock
The Talley Lightweight 2 Piece Scope Mount with Integral 1" Rings in High height is purpose-built for Browning X-Bolt rifles and engineered to deliver a rock-solid optics platform without the weight penalty of traditional steel bases and rings. Unlike conventional two-piece designs where the base and rings connect as separate components, Talley's unitized construction integrates the rings directly into the mount, eliminating the interface gap where alignment issues and loose connections can develop over time and recoil cycles.
The engineering advantage here is significant: by extruding 7000-series aluminum alloy—a material known for strength and durability—and then precision CNC machining the entire assembly as one piece, you get a mount system that's both lighter than comparable steel setups and genuinely more rigid. There's no joint to loosen, no ring-to-base misalignment to creep in after hard use. For hunters and shooters running quality glass on their X-Bolt, that means confidence that your zero will hold through the field or across the bench.
The Hell's Canyon finish on this 2-piece mount blends practical corrosion resistance with the aesthetic that's become standard on modern Browning rifles. High ring height accommodates larger objective lenses and clears most common bolt-action cheek risers and scope caps, making it a straightforward fit for hunting optics and mid-to-high magnification scopes. Whether you're glassing from a ridge or taking a precision shot, a solid mount foundation is your first line of repeatability.
| Ring Diameter | 1" |
| Ring Height | High |
| Material | 7000-series aluminum alloy |
| Configuration | 2-piece with integral rings |
| Finish | Hell's Canyon |
| Rifle Compatibility | Browning X-Bolt |
Yes. This Talley mount is specifically designed for Browning X-Bolt action rifles and uses the X-Bolt's standard drilled and tapped base pattern.
The key difference is the integral ring design. Rather than a base screwed to the rifle with separate rings that clamp onto it, Talley's unitized construction combines the rings and base into one rigid piece. This eliminates the joint where traditional two-piece systems can develop misalignment or looseness over time and shooting.
High rings are designed to clear larger objective lenses and most aftermarket cheek risers. For precise fit information, verify your specific scope's objective diameter and height with the scope's documentation, or contact us before ordering.
This 7000-series aluminum alloy is engineered for both strength and durability while delivering significant weight savings compared to steel. Because the entire mount is machined as one piece, you don't sacrifice rigidity—you gain it by eliminating the potential weak points where separate components join.
SKU: 114462335 • Width: 3.6in • Height: 1.8in • Depth: 7.8in • Weight: 0.2oz
Availability: In Stock
The Talley Lightweight 2 Piece Scope Mount with Integral 1" Rings in High height is purpose-built for Browning X-Bolt rifles and engineered to deliver a rock-solid optics platform without the weight penalty of traditional steel bases and rings. Unlike conventional two-piece designs where the base and rings connect as separate components, Talley's unitized construction integrates the rings directly into the mount, eliminating the interface gap where alignment issues and loose connections can develop over time and recoil cycles.
The engineering advantage here is significant: by extruding 7000-series aluminum alloy—a material known for strength and durability—and then precision CNC machining the entire assembly as one piece, you get a mount system that's both lighter than comparable steel setups and genuinely more rigid. There's no joint to loosen, no ring-to-base misalignment to creep in after hard use. For hunters and shooters running quality glass on their X-Bolt, that means confidence that your zero will hold through the field or across the bench.
The Hell's Canyon finish on this 2-piece mount blends practical corrosion resistance with the aesthetic that's become standard on modern Browning rifles. High ring height accommodates larger objective lenses and clears most common bolt-action cheek risers and scope caps, making it a straightforward fit for hunting optics and mid-to-high magnification scopes. Whether you're glassing from a ridge or taking a precision shot, a solid mount foundation is your first line of repeatability.
| Ring Diameter | 1" |
| Ring Height | High |
| Material | 7000-series aluminum alloy |
| Configuration | 2-piece with integral rings |
| Finish | Hell's Canyon |
| Rifle Compatibility | Browning X-Bolt |
Yes. This Talley mount is specifically designed for Browning X-Bolt action rifles and uses the X-Bolt's standard drilled and tapped base pattern.
The key difference is the integral ring design. Rather than a base screwed to the rifle with separate rings that clamp onto it, Talley's unitized construction combines the rings and base into one rigid piece. This eliminates the joint where traditional two-piece systems can develop misalignment or looseness over time and shooting.
High rings are designed to clear larger objective lenses and most aftermarket cheek risers. For precise fit information, verify your specific scope's objective diameter and height with the scope's documentation, or contact us before ordering.
This 7000-series aluminum alloy is engineered for both strength and durability while delivering significant weight savings compared to steel. Because the entire mount is machined as one piece, you don't sacrifice rigidity—you gain it by eliminating the potential weak points where separate components join.
SKU: 114462335 • Width: 3.6in • Height: 1.8in • Depth: 7.8in • Weight: 0.2oz