Talley Manufacturing114465151
Talley Lightweight 2-Piece Scope Mount with Integral 30mm Rings, Low Profile, Black Anodized for Marlin Model 336$42.09
Availability: In Stock
The Talley Lightweight 2-Piece Scope Mount with Integral 1" Rings is engineered for shooters who want a rock-solid hunting optic platform without the weight penalty. Built for the Marlin Model 336, this medium-height mount combines the base and ring into a unified structure—no separate ring/base joint to loosen or complicate zero. That integrated design isn't just clever engineering; it means a stronger, stiffer platform where it counts, and real weight savings that add up on a rifle you'll carry all day in the field.
Talley's approach to scope mounting starts with the principle that fewer parts and simpler geometry make a better gun. The integral 1" rings grip your scope with 5/8"-wide ring caps secured by four TORX screws, giving you four contact points to keep optics locked in place without shifting—critical on a lever gun where the action and stock work hard. Black anodized finish resists corrosion while maintaining the clean, understated look that works on a classic rifle like the Model 336.
If you run a traditional hunting optic on your Marlin and want a mount that prioritizes reliability and durability over complexity, Talley's integrated design delivers. Whether you're hunting deer in timber or running steel at distance, a lighter, stiffer scope platform helps you shoot better and carry easier. This is the kind of no-nonsense equipment that Mel Forbes, the designer behind Ultralight Arms, would put on his own rifle.
| Manufacturer | Talley Manufacturing |
| Ring Diameter | 1" |
| Ring Cap Width | 5/8" |
| Mount Height | Medium |
| Firearm Compatibility | Marlin Model 336 |
| Finish | Black Anodized |
| Fastener Type | TORX Screws (4 per ring cap) |
Yes—this Talley mount is specifically designed for the Marlin Model 336 platform and is offered in the medium height configuration for this rifle.
The integral rings are 1" diameter, so they are designed for 1" tube scopes, which are the standard for most hunting optics.
The product consists of the two-piece mount assembly with integrated 1" rings and all fasteners (TORX screws) needed for installation on your Marlin Model 336.
An integral mount is lighter, removes a potential alignment issue, and delivers a stiffer platform with fewer separate components to come loose. Talley's design prioritizes strength and simplicity—qualities that matter on a working hunting rifle.
SKU: 114465721 • Width: 3.8in • Height: 1.8in • Depth: 8in • Weight: 0.25oz
Availability: In Stock
The Talley Lightweight 2-Piece Scope Mount with Integral 1" Rings is engineered for shooters who want a rock-solid hunting optic platform without the weight penalty. Built for the Marlin Model 336, this medium-height mount combines the base and ring into a unified structure—no separate ring/base joint to loosen or complicate zero. That integrated design isn't just clever engineering; it means a stronger, stiffer platform where it counts, and real weight savings that add up on a rifle you'll carry all day in the field.
Talley's approach to scope mounting starts with the principle that fewer parts and simpler geometry make a better gun. The integral 1" rings grip your scope with 5/8"-wide ring caps secured by four TORX screws, giving you four contact points to keep optics locked in place without shifting—critical on a lever gun where the action and stock work hard. Black anodized finish resists corrosion while maintaining the clean, understated look that works on a classic rifle like the Model 336.
If you run a traditional hunting optic on your Marlin and want a mount that prioritizes reliability and durability over complexity, Talley's integrated design delivers. Whether you're hunting deer in timber or running steel at distance, a lighter, stiffer scope platform helps you shoot better and carry easier. This is the kind of no-nonsense equipment that Mel Forbes, the designer behind Ultralight Arms, would put on his own rifle.
| Manufacturer | Talley Manufacturing |
| Ring Diameter | 1" |
| Ring Cap Width | 5/8" |
| Mount Height | Medium |
| Firearm Compatibility | Marlin Model 336 |
| Finish | Black Anodized |
| Fastener Type | TORX Screws (4 per ring cap) |
Yes—this Talley mount is specifically designed for the Marlin Model 336 platform and is offered in the medium height configuration for this rifle.
The integral rings are 1" diameter, so they are designed for 1" tube scopes, which are the standard for most hunting optics.
The product consists of the two-piece mount assembly with integrated 1" rings and all fasteners (TORX screws) needed for installation on your Marlin Model 336.
An integral mount is lighter, removes a potential alignment issue, and delivers a stiffer platform with fewer separate components to come loose. Talley's design prioritizes strength and simplicity—qualities that matter on a working hunting rifle.
SKU: 114465721 • Width: 3.8in • Height: 1.8in • Depth: 8in • Weight: 0.25oz