Talley Manufacturing114463992
Talley Lightweight 2-Piece Scope Mount with Integral 30mm Rings, Low Profile, Black Anodized for Winchester Model 70 (.860)$42.09
Loading...
Loading...
Loading...
Availability: In Stock
The Talley Lightweight 2-Piece Scope Mount with Integral 1" Rings is purpose-built for Winchester Model 70 rifles and delivers the kind of no-nonsense engineering that serious hunters and precision shooters depend on. This low-profile mount combines minimal weight with rigid stability—a critical balance when you're glassing for elk at altitude or settling in behind a rifle that needs to shoot exactly where you point it. The integrated 1-inch rings eliminate the extra hardware and potential shift that separate ring systems can introduce, while the two-piece design keeps disassembly straightforward if you ever need to swap optics or service your rifle.
Talley machines these mounts from aluminum alloy, choosing materials and tolerances that prioritize durability without unnecessary bulk. The black anodized finish resists corrosion in the field and won't catch glint in rough country. The low-profile geometry keeps your sight picture natural and lets you mount glass suited to your actual hunting range—not limited by a mount that sits too high. Winchester Model 70 owners looking for a genuine lightweight solution that doesn't sacrifice rigidity or return-to-zero reliability will find this mount does exactly what it claims: it gets out of the way and stays put.
If you're building or upgrading a hunting rifle and weight matters—whether you're packing into alpine terrain or simply prefer a rifle that doesn't fatigue your arms after a long day of glassing—a quality scope mount is where that philosophy begins. This Talley mount respects that priority while maintaining the precision alignment your optics need to deliver.
| Manufacturer | Talley Manufacturing |
| Mount Type | 2-Piece with Integral Rings |
| Ring Size | 1 inch |
| Profile | Low Profile |
| Finish | Black Anodized |
| Rifle Compatibility | Winchester Model 70 (.860 ring height) |
Yes—this mount is engineered specifically for the Winchester Model 70 platform. The .860 dimension refers to the ring height specification for that action, so compatibility is direct.
The 1-inch rings are built into the mount itself rather than being separate components. This simplifies assembly, reduces weight, and eliminates any play or shift between ring and base that can occur with two-piece ring systems.
The low-profile design keeps the sight line relatively close to the action. Specific clearance depends on your scope model and turret configuration—we'd recommend verifying your scope's objective bell diameter and turret height before ordering.
You're receiving the 2-piece Talley mount with integral 1-inch rings and black anodize finish, ready to attach to your Winchester Model 70. Mounting hardware and instructions are included.
SKU: 114463372 • Width: 3.5in • Height: 1.5in • Depth: 5.1in • Weight: 0.25oz
Availability: In Stock
The Talley Lightweight 2-Piece Scope Mount with Integral 1" Rings is purpose-built for Winchester Model 70 rifles and delivers the kind of no-nonsense engineering that serious hunters and precision shooters depend on. This low-profile mount combines minimal weight with rigid stability—a critical balance when you're glassing for elk at altitude or settling in behind a rifle that needs to shoot exactly where you point it. The integrated 1-inch rings eliminate the extra hardware and potential shift that separate ring systems can introduce, while the two-piece design keeps disassembly straightforward if you ever need to swap optics or service your rifle.
Talley machines these mounts from aluminum alloy, choosing materials and tolerances that prioritize durability without unnecessary bulk. The black anodized finish resists corrosion in the field and won't catch glint in rough country. The low-profile geometry keeps your sight picture natural and lets you mount glass suited to your actual hunting range—not limited by a mount that sits too high. Winchester Model 70 owners looking for a genuine lightweight solution that doesn't sacrifice rigidity or return-to-zero reliability will find this mount does exactly what it claims: it gets out of the way and stays put.
If you're building or upgrading a hunting rifle and weight matters—whether you're packing into alpine terrain or simply prefer a rifle that doesn't fatigue your arms after a long day of glassing—a quality scope mount is where that philosophy begins. This Talley mount respects that priority while maintaining the precision alignment your optics need to deliver.
| Manufacturer | Talley Manufacturing |
| Mount Type | 2-Piece with Integral Rings |
| Ring Size | 1 inch |
| Profile | Low Profile |
| Finish | Black Anodized |
| Rifle Compatibility | Winchester Model 70 (.860 ring height) |
Yes—this mount is engineered specifically for the Winchester Model 70 platform. The .860 dimension refers to the ring height specification for that action, so compatibility is direct.
The 1-inch rings are built into the mount itself rather than being separate components. This simplifies assembly, reduces weight, and eliminates any play or shift between ring and base that can occur with two-piece ring systems.
The low-profile design keeps the sight line relatively close to the action. Specific clearance depends on your scope model and turret configuration—we'd recommend verifying your scope's objective bell diameter and turret height before ordering.
You're receiving the 2-piece Talley mount with integral 1-inch rings and black anodize finish, ready to attach to your Winchester Model 70. Mounting hardware and instructions are included.
SKU: 114463372 • Width: 3.5in • Height: 1.5in • Depth: 5.1in • Weight: 0.25oz