Talley Manufacturing167524026
Talley Browning X-Bolt Scope Mounts 30Mm Med 20 Moa Long/Mag Smoked Bronze$99.36
Availability: In Stock
If you run a Browning X-Bolt and want to mount a 30mm scope with minimal hassle, the Talley Browning X-Bolt Scope Mounts deliver a no-fuss, one-piece solution that eliminates the weaknesses of traditional split-ring systems. Built by Talley Manufacturing—a maker with over 40 years in the precision scope-mounting business—these smoked bronze mounts combine integrated ring-and-base design with aircraft-grade aluminum construction and CNC precision, so your scope stays put and your zero stays true.
The standout here is the integrated one-piece design. Unlike conventional two-piece rings and bases, which introduce an extra interface and potential alignment headaches, Talley's approach machines the ring and base as a single unit. That means no loose connections, no shimming, and no lapping required—they're ready to shoot straight out of the box. The aluminum alloy is lighter than steel alternatives without sacrificing rigidity, and the smoked bronze finish resists corrosion while keeping weight down.
Built-in 20 MOA elevation is included, so if you're stretching your X-Bolt's reach beyond point-blank hunting distances or running a long-range load, you gain 20 minutes of extra elevation without dialing your turrets into the clouds. That's real utility for hunters and shooters who want flatter trajectories or table-top setup for extended ranges. For close-range work, the low ring height keeps you in a natural firing position with lower-power optics or traditional crosshairs.
American-made, fully CNC machined, and backed by Talley's reputation for tight tolerances and durability, these mounts are built to handle hard use and stay accurate season after season.
| Brand | Talley Manufacturing |
| Product Type | Scope Mounts |
| Rifle Compatibility | Browning X-Bolt |
| Tube Diameter | 30mm |
| Ring Height | Low |
| Built-in Elevation | 20 MOA |
| Finish | Smoked Bronze |
| Material | Aircraft-grade aluminum alloy |
| Design | Integrated one-piece ring and base |
| Lapping Required | No |
Yes, these Talley mounts are designed specifically for Browning X-Bolt rifles in long and magnum action lengths.
The mounts have 20 minutes of angle of elevation pre-tilted into the ring-and-base assembly. This gives you extra elevation room on your scope's turret, useful for long-range hunting or shooting when you need a flatter sight line without maxing out your scope's adjustment range.
No. Talley's integrated one-piece design and CNC precision mean they're ready to mount and shoot out of the box. Lapping is not required.
A single integrated casting eliminates the interface between a separate ring and base, removing potential sources of misalignment and loose connections that can creep over time with traditional two-piece systems. The result is a more rigid, durable mount that holds zero better.
SKU: 167523142 • Width: 4in • Height: 2in • Depth: 8in • Weight: 0.235oz
Availability: In Stock
If you run a Browning X-Bolt and want to mount a 30mm scope with minimal hassle, the Talley Browning X-Bolt Scope Mounts deliver a no-fuss, one-piece solution that eliminates the weaknesses of traditional split-ring systems. Built by Talley Manufacturing—a maker with over 40 years in the precision scope-mounting business—these smoked bronze mounts combine integrated ring-and-base design with aircraft-grade aluminum construction and CNC precision, so your scope stays put and your zero stays true.
The standout here is the integrated one-piece design. Unlike conventional two-piece rings and bases, which introduce an extra interface and potential alignment headaches, Talley's approach machines the ring and base as a single unit. That means no loose connections, no shimming, and no lapping required—they're ready to shoot straight out of the box. The aluminum alloy is lighter than steel alternatives without sacrificing rigidity, and the smoked bronze finish resists corrosion while keeping weight down.
Built-in 20 MOA elevation is included, so if you're stretching your X-Bolt's reach beyond point-blank hunting distances or running a long-range load, you gain 20 minutes of extra elevation without dialing your turrets into the clouds. That's real utility for hunters and shooters who want flatter trajectories or table-top setup for extended ranges. For close-range work, the low ring height keeps you in a natural firing position with lower-power optics or traditional crosshairs.
American-made, fully CNC machined, and backed by Talley's reputation for tight tolerances and durability, these mounts are built to handle hard use and stay accurate season after season.
| Brand | Talley Manufacturing |
| Product Type | Scope Mounts |
| Rifle Compatibility | Browning X-Bolt |
| Tube Diameter | 30mm |
| Ring Height | Low |
| Built-in Elevation | 20 MOA |
| Finish | Smoked Bronze |
| Material | Aircraft-grade aluminum alloy |
| Design | Integrated one-piece ring and base |
| Lapping Required | No |
Yes, these Talley mounts are designed specifically for Browning X-Bolt rifles in long and magnum action lengths.
The mounts have 20 minutes of angle of elevation pre-tilted into the ring-and-base assembly. This gives you extra elevation room on your scope's turret, useful for long-range hunting or shooting when you need a flatter sight line without maxing out your scope's adjustment range.
No. Talley's integrated one-piece design and CNC precision mean they're ready to mount and shoot out of the box. Lapping is not required.
A single integrated casting eliminates the interface between a separate ring and base, removing potential sources of misalignment and loose connections that can creep over time with traditional two-piece systems. The result is a more rigid, durable mount that holds zero better.
SKU: 167523142 • Width: 4in • Height: 2in • Depth: 8in • Weight: 0.235oz