Availability: In Stock
The SureFire 3P Eliminator flash hider for 5.56 NATO is purpose-built to crush muzzle flash on AR-platform rifles without requiring a suppressor. Precision-machined from US mill-certified, heat-treated stainless steel and finished in black nitride, this standalone muzzle device delivers over 98% flash reduction compared to a bare muzzle when shooting SAAMI-spec MIL Standard ammunition. For shooters who need fast target reacquisition in low light, reduced signature on the range, or simply want to keep their shooting position concealed, the 3P Eliminator works hard without the regulatory or financial commitment of a suppressor.
The engineering here is classically SureFire: high-precision single-point cut threads ensure a rock-solid interface with your barrel, and a blind pilot hole lets you pin and weld the device if your barrel length and local laws demand it. At 2.60" overall length, it adds manageable mass to your muzzle while keeping your rifle's balance and handling intact. Installation is straightforward—no permanent modifications to your rifle are required unless you choose to permanently mount it.
Made in the USA and compatible with any 5.56 NATO barrel threaded 1/2"-28, the 3P Eliminator is the answer for shooters who want flash control without the complexity or cost of a suppressor system. Whether you're running a precision rifle at the range, a duty gun in low-light scenarios, or a hunting rifle where muzzle flash matters, this is serious flash management from a company that knows the business.
| Caliber | 5.56 NATO |
| Thread Size | 1/2"-28 |
| Overall Length | 2.60" |
| Material | Heat-treated stainless steel (US mill-certified) |
| Finish | Black nitride |
| Flash Reduction | Over 98% reduction vs. bare muzzle (SAAMI-spec MIL Standard ammunition) |
| Type | Standalone muzzle device (not a suppressor adapter) |
| Made | USA |
Yes, provided your barrel is chambered in 5.56 NATO and threaded 1/2"-28. This is the standard threading for most AR-15 rifles. Always verify your barrel's thread pitch and caliber before purchase.
Yes. The 3P Eliminator includes a blind pilot hole that allows you to pin and weld the device to your barrel for permanent installation. Pin and weld is a common way to permanently attach a muzzle device and may be relevant depending on your local regulations and barrel length. Professional installation by a gunsmith is recommended.
The 3P Eliminator reduces muzzle flash by over 98% compared to a bare muzzle when firing SAAMI-spec MIL Standard ammunition. Real-world results depend on ammunition type, powder burn rate, and lighting conditions.
No. The 3P Eliminator is a standalone flash hider designed to reduce visible muzzle flash. It is not a suppressor and does not reduce sound. While SureFire makes suppressor adapters with similar flash reduction capability, this device functions only as a muzzle device.
SKU: 115709787 • Width: 1.7in • Height: 1in • Depth: 2.9in • Weight: 0.31oz
Availability: In Stock
The SureFire 3P Eliminator flash hider for 5.56 NATO is purpose-built to crush muzzle flash on AR-platform rifles without requiring a suppressor. Precision-machined from US mill-certified, heat-treated stainless steel and finished in black nitride, this standalone muzzle device delivers over 98% flash reduction compared to a bare muzzle when shooting SAAMI-spec MIL Standard ammunition. For shooters who need fast target reacquisition in low light, reduced signature on the range, or simply want to keep their shooting position concealed, the 3P Eliminator works hard without the regulatory or financial commitment of a suppressor.
The engineering here is classically SureFire: high-precision single-point cut threads ensure a rock-solid interface with your barrel, and a blind pilot hole lets you pin and weld the device if your barrel length and local laws demand it. At 2.60" overall length, it adds manageable mass to your muzzle while keeping your rifle's balance and handling intact. Installation is straightforward—no permanent modifications to your rifle are required unless you choose to permanently mount it.
Made in the USA and compatible with any 5.56 NATO barrel threaded 1/2"-28, the 3P Eliminator is the answer for shooters who want flash control without the complexity or cost of a suppressor system. Whether you're running a precision rifle at the range, a duty gun in low-light scenarios, or a hunting rifle where muzzle flash matters, this is serious flash management from a company that knows the business.
| Caliber | 5.56 NATO |
| Thread Size | 1/2"-28 |
| Overall Length | 2.60" |
| Material | Heat-treated stainless steel (US mill-certified) |
| Finish | Black nitride |
| Flash Reduction | Over 98% reduction vs. bare muzzle (SAAMI-spec MIL Standard ammunition) |
| Type | Standalone muzzle device (not a suppressor adapter) |
| Made | USA |
Yes, provided your barrel is chambered in 5.56 NATO and threaded 1/2"-28. This is the standard threading for most AR-15 rifles. Always verify your barrel's thread pitch and caliber before purchase.
Yes. The 3P Eliminator includes a blind pilot hole that allows you to pin and weld the device to your barrel for permanent installation. Pin and weld is a common way to permanently attach a muzzle device and may be relevant depending on your local regulations and barrel length. Professional installation by a gunsmith is recommended.
The 3P Eliminator reduces muzzle flash by over 98% compared to a bare muzzle when firing SAAMI-spec MIL Standard ammunition. Real-world results depend on ammunition type, powder burn rate, and lighting conditions.
No. The 3P Eliminator is a standalone flash hider designed to reduce visible muzzle flash. It is not a suppressor and does not reduce sound. While SureFire makes suppressor adapters with similar flash reduction capability, this device functions only as a muzzle device.
SKU: 115709787 • Width: 1.7in • Height: 1in • Depth: 2.9in • Weight: 0.31oz