Strike Industries152745401
Strike Brl Clmp 1301 Tac/A300 Ult$35.95
Availability: In Stock
The Strike Shotgun Barrel Clamp for 12-gauge is a lightweight aluminum accessory mount designed to reinforce magazine feed tubes while adding tactical functionality to your shotgun. Built from 6061-T6 aluminum and available in black anodized finish, this clamp gives you dual mounting options: a Picatinny rail on one side for weapon lights and optics, and a 360° free-swivel quick-detach socket on the other for fast sling attachment. You choose which configuration suits your setup—the rail and QD socket are reversible, so your gear stays where you want it.
Strike Industries engineered this clamp for shooters running common 12-gauge platforms like the Benelli M2, M4, and Remington 870. Installation is straightforward: the included set screws, hex tool, and threadlocker make it a field-friendly job. The free-swivel QD point means your sling moves naturally without binding, and the added rigidity to your magazine tube improves feeding reliability under heavy use. Whether you're running a tactical shotgun at 3-gun matches, home-defense drills, or hunting, this clamp lets you mount what you need without cutting into your gun's footprint.
Note that compatibility varies even within listed models—some specialty versions may not fit—so verify fit before committing. The aluminum construction keeps weight minimal, and the black finish blends seamlessly with most modern shotgun platforms. Like any metal-to-metal accessory, inspect your QD socket and clamp regularly for wear or finish damage, and always keep your weapon on safe when not firing.
| Brand | Strike Industries |
| Gauge | 12-Gauge |
| Material | 6061-T6 Aluminum |
| Finish | Black Anodized |
| Mount Type | Picatinny Rail & QD Socket (Reversible) |
| QD Socket | 360° Free-Swivel |
| Set Screws Included | M5x14mm (Qty. 2) |
| Threadlocker | Loctite Blue 243 |
The Strike Shotgun Barrel Clamp is designed for most common 12-gauge barrels and feed tubes. Officially tested models include the Benelli M2, M4, and Remington 870. Other 12-gauge shotguns may fit, though compatibility is not guaranteed. Note that some special-edition versions of listed models and Mossberg 500 and 930 models are not compatible. Always verify fit before purchase.
No. The clamp features one Picatinny rail on one side and one QD socket on the other. You mount the clamp with your preferred configuration, but you cannot use both simultaneously. The design is reversible, so you can swap which side gets which accessory during installation.
Each Strike Shotgun Barrel Clamp comes with one Picatinny rail side, one QD socket side, two M5x14mm set screws, a 4mm hex tool, Loctite Blue 243 threadlocker, and a warning card.
Because this is a metal-to-metal accessory, there is always a possibility of marring the finish or coating where it contacts your shotgun. Inspect the clamp and contact points before installation, and check regularly for wear during use.
SKU: 144597112 • Width: 2in • Height: 1.5in • Depth: 3.85in • Weight: 0.19oz
Availability: In Stock
The Strike Shotgun Barrel Clamp for 12-gauge is a lightweight aluminum accessory mount designed to reinforce magazine feed tubes while adding tactical functionality to your shotgun. Built from 6061-T6 aluminum and available in black anodized finish, this clamp gives you dual mounting options: a Picatinny rail on one side for weapon lights and optics, and a 360° free-swivel quick-detach socket on the other for fast sling attachment. You choose which configuration suits your setup—the rail and QD socket are reversible, so your gear stays where you want it.
Strike Industries engineered this clamp for shooters running common 12-gauge platforms like the Benelli M2, M4, and Remington 870. Installation is straightforward: the included set screws, hex tool, and threadlocker make it a field-friendly job. The free-swivel QD point means your sling moves naturally without binding, and the added rigidity to your magazine tube improves feeding reliability under heavy use. Whether you're running a tactical shotgun at 3-gun matches, home-defense drills, or hunting, this clamp lets you mount what you need without cutting into your gun's footprint.
Note that compatibility varies even within listed models—some specialty versions may not fit—so verify fit before committing. The aluminum construction keeps weight minimal, and the black finish blends seamlessly with most modern shotgun platforms. Like any metal-to-metal accessory, inspect your QD socket and clamp regularly for wear or finish damage, and always keep your weapon on safe when not firing.
| Brand | Strike Industries |
| Gauge | 12-Gauge |
| Material | 6061-T6 Aluminum |
| Finish | Black Anodized |
| Mount Type | Picatinny Rail & QD Socket (Reversible) |
| QD Socket | 360° Free-Swivel |
| Set Screws Included | M5x14mm (Qty. 2) |
| Threadlocker | Loctite Blue 243 |
The Strike Shotgun Barrel Clamp is designed for most common 12-gauge barrels and feed tubes. Officially tested models include the Benelli M2, M4, and Remington 870. Other 12-gauge shotguns may fit, though compatibility is not guaranteed. Note that some special-edition versions of listed models and Mossberg 500 and 930 models are not compatible. Always verify fit before purchase.
No. The clamp features one Picatinny rail on one side and one QD socket on the other. You mount the clamp with your preferred configuration, but you cannot use both simultaneously. The design is reversible, so you can swap which side gets which accessory during installation.
Each Strike Shotgun Barrel Clamp comes with one Picatinny rail side, one QD socket side, two M5x14mm set screws, a 4mm hex tool, Loctite Blue 243 threadlocker, and a warning card.
Because this is a metal-to-metal accessory, there is always a possibility of marring the finish or coating where it contacts your shotgun. Inspect the clamp and contact points before installation, and check regularly for wear during use.
SKU: 144597112 • Width: 2in • Height: 1.5in • Depth: 3.85in • Weight: 0.19oz