Availability: In Stock
The Strike Industries Venom Flash Hider is a four-prong muzzle device engineered to control muzzle flash on .223 Rem and 5.56x45mm NATO AR-platform rifles. Threaded 1/2"-28 TPI, it installs directly onto your barrel without any modifications—just torque it down to 15–20 ft-lbs and you're ready to shoot. The four-prong design does double duty: it helps manage the burning gases exiting your barrel while simultaneously protecting your muzzle crown from damage and wear. For shooters who run night-vision equipment or train in low-light conditions, effective flash reduction means faster follow-up shots and better situational awareness downrange.
Built from black steel and measuring 2.16" in overall length with a 0.862" diameter, the Venom FH strikes a balance between flash suppression and a compact profile that won't add excessive weight or length to your rifle. Strike Industries engineered the prong geometry to disperse gases efficiently, helping you stay off the visible light signature that draws attention in tactical or hunting scenarios. Whether you're working through a carbine course, hunting at dawn or dusk, or setting up an AR for duty or sport, a quality flash hider is a no-nonsense upgrade that actually improves your shooting.
Installation is straightforward for anyone comfortable with basic armorer-level work. The 1/2"-28 thread pattern is the standard on modern .223 and 5.56 AR uppers, so fitment is plug-and-play. If you're looking to pair this with additional muzzle devices or accessories, Strike Industries also offers combination kits that bundle compatible components—worth exploring if you want an integrated solution.
| Manufacturer | Strike Industries |
| Model | VENOMFH223 |
| Caliber | .223 Rem, 5.56x45mm NATO |
| Thread Pattern | 1/2"-28 TPI |
| Overall Length | 2.16" |
| Outer Diameter | 0.862" |
| Material | Black Steel |
| Recommended Torque | 15–20 ft-lbs |
Yes, if your upper receiver is chambered in .223 Rem or 5.56x45mm NATO and the barrel has a 1/2"-28 TPI muzzle thread, the Venom FH will install directly without modifications.
The Venom FH is designed to significantly reduce muzzle flash, which helps preserve your night-vision capability and situational awareness. Less visible flash means faster target reacquisition and better awareness of your surroundings in low-light shooting.
No. The Venom FH requires no modifications to your rifle. With a wrench and the recommended 15–20 ft-lbs of torque, installation is straightforward enough for most shooters with basic mechanical skill.
Strike Industries offers combination products and accessory compatibility options for the Venom FH—check the Strike Industries accessory lineup to see what integrates with this flash hider.
SKU: 115668353 • Width: 1.5in • Height: 1in • Depth: 3.4in • Weight: 0.25oz
Availability: In Stock
The Strike Industries Venom Flash Hider is a four-prong muzzle device engineered to control muzzle flash on .223 Rem and 5.56x45mm NATO AR-platform rifles. Threaded 1/2"-28 TPI, it installs directly onto your barrel without any modifications—just torque it down to 15–20 ft-lbs and you're ready to shoot. The four-prong design does double duty: it helps manage the burning gases exiting your barrel while simultaneously protecting your muzzle crown from damage and wear. For shooters who run night-vision equipment or train in low-light conditions, effective flash reduction means faster follow-up shots and better situational awareness downrange.
Built from black steel and measuring 2.16" in overall length with a 0.862" diameter, the Venom FH strikes a balance between flash suppression and a compact profile that won't add excessive weight or length to your rifle. Strike Industries engineered the prong geometry to disperse gases efficiently, helping you stay off the visible light signature that draws attention in tactical or hunting scenarios. Whether you're working through a carbine course, hunting at dawn or dusk, or setting up an AR for duty or sport, a quality flash hider is a no-nonsense upgrade that actually improves your shooting.
Installation is straightforward for anyone comfortable with basic armorer-level work. The 1/2"-28 thread pattern is the standard on modern .223 and 5.56 AR uppers, so fitment is plug-and-play. If you're looking to pair this with additional muzzle devices or accessories, Strike Industries also offers combination kits that bundle compatible components—worth exploring if you want an integrated solution.
| Manufacturer | Strike Industries |
| Model | VENOMFH223 |
| Caliber | .223 Rem, 5.56x45mm NATO |
| Thread Pattern | 1/2"-28 TPI |
| Overall Length | 2.16" |
| Outer Diameter | 0.862" |
| Material | Black Steel |
| Recommended Torque | 15–20 ft-lbs |
Yes, if your upper receiver is chambered in .223 Rem or 5.56x45mm NATO and the barrel has a 1/2"-28 TPI muzzle thread, the Venom FH will install directly without modifications.
The Venom FH is designed to significantly reduce muzzle flash, which helps preserve your night-vision capability and situational awareness. Less visible flash means faster target reacquisition and better awareness of your surroundings in low-light shooting.
No. The Venom FH requires no modifications to your rifle. With a wrench and the recommended 15–20 ft-lbs of torque, installation is straightforward enough for most shooters with basic mechanical skill.
Strike Industries offers combination products and accessory compatibility options for the Venom FH—check the Strike Industries accessory lineup to see what integrates with this flash hider.
SKU: 115668353 • Width: 1.5in • Height: 1in • Depth: 3.4in • Weight: 0.25oz