Strike Industries115697996
Strike Industries Polymer Magwell for Glock 19/23 Gen 3 - Black$16.95
Availability: In Stock
The Strike Industries Polymer Magwell for Glock 19/23 Gen 5 is a practical upgrade for shooters looking to tighten up their reload speed without sacrificing the slim, carry-friendly profile of the stock pistol. This flared magwell funnel makes magazine insertion faster and more reliable when you're running drills at the range or training for defensive scenarios—those fractions of a second add up. The funnel geometry cuts down on fumbled reloads while the reinforced front lip gives your grip hand a solid reference point, especially helpful if you're using an aggressive grip or shooting under stress.
Built from high-strength polymer, it's lightweight and won't bog down your carry gun. Installation is straightforward—the magwell attaches via a single M4 set screw (included, along with the hex key) and plays well with most aftermarket magazine base plates and extensions. If you're already running a Strike Industries Extended Magazine Plate (EMP), the magwell is designed to complement it seamlessly. The modest added material keeps the gun comfortable in the holster and won't print through your cover garment.
Keep one important thing in mind during installation: don't overtighten that set screw. Strike Industries warns that cranking it down too hard will throw off alignment and can damage both the magwell and the firearm itself. If you're uncertain about install technique, contact their support team or consult a gunsmith. The magwell is designed for Gen 5 Glock 19/23 with or without the half-moon cut and is built around the factory +0 backstrap; larger factory or aftermarket backstraps may require modification to fit. It is not compatible with the Glock 19X.
| Brand | Strike Industries |
| Fits | Glock 19/23 Gen 5 (with and without half-moon cut) |
| Material | High-strength polymer |
| Color | Black |
| Backstrap Compatibility | Factory +0 backstrap |
| Package Contents | Magwell, M4 set screw, 2.5mm hex key |
| Not Compatible With | Glock 19X |
Yes, the Strike Industries Polymer Magwell is designed for Glock 19 Gen 5 models, both with and without the half-moon cut. It is not compatible with the 19X variant. It's also compatible with Glock 23 Gen 5.
You get the magwell itself, one M4 set screw for attachment, and a 2.5mm hex key for installation. Everything you need to bolt it on.
The magwell is compatible with most aftermarket magazine base plates and extensions. It's especially designed to work well with the Strike Industries Extended Magazine Plate (EMP) for the Glock 19.
Overtightening the set screw will throw the magwell's alignment off and can damage both the magwell and your firearm. Install it snugly but don't force it. If you're unsure about proper installation technique, contact Strike Industries customer support or consult a local gunsmith.
SKU: 115746395 • Width: 1.5in • Height: 1.4in • Depth: 3.7in • Weight: 0.06oz
Availability: In Stock
The Strike Industries Polymer Magwell for Glock 19/23 Gen 5 is a practical upgrade for shooters looking to tighten up their reload speed without sacrificing the slim, carry-friendly profile of the stock pistol. This flared magwell funnel makes magazine insertion faster and more reliable when you're running drills at the range or training for defensive scenarios—those fractions of a second add up. The funnel geometry cuts down on fumbled reloads while the reinforced front lip gives your grip hand a solid reference point, especially helpful if you're using an aggressive grip or shooting under stress.
Built from high-strength polymer, it's lightweight and won't bog down your carry gun. Installation is straightforward—the magwell attaches via a single M4 set screw (included, along with the hex key) and plays well with most aftermarket magazine base plates and extensions. If you're already running a Strike Industries Extended Magazine Plate (EMP), the magwell is designed to complement it seamlessly. The modest added material keeps the gun comfortable in the holster and won't print through your cover garment.
Keep one important thing in mind during installation: don't overtighten that set screw. Strike Industries warns that cranking it down too hard will throw off alignment and can damage both the magwell and the firearm itself. If you're uncertain about install technique, contact their support team or consult a gunsmith. The magwell is designed for Gen 5 Glock 19/23 with or without the half-moon cut and is built around the factory +0 backstrap; larger factory or aftermarket backstraps may require modification to fit. It is not compatible with the Glock 19X.
| Brand | Strike Industries |
| Fits | Glock 19/23 Gen 5 (with and without half-moon cut) |
| Material | High-strength polymer |
| Color | Black |
| Backstrap Compatibility | Factory +0 backstrap |
| Package Contents | Magwell, M4 set screw, 2.5mm hex key |
| Not Compatible With | Glock 19X |
Yes, the Strike Industries Polymer Magwell is designed for Glock 19 Gen 5 models, both with and without the half-moon cut. It is not compatible with the 19X variant. It's also compatible with Glock 23 Gen 5.
You get the magwell itself, one M4 set screw for attachment, and a 2.5mm hex key for installation. Everything you need to bolt it on.
The magwell is compatible with most aftermarket magazine base plates and extensions. It's especially designed to work well with the Strike Industries Extended Magazine Plate (EMP) for the Glock 19.
Overtightening the set screw will throw the magwell's alignment off and can damage both the magwell and your firearm. Install it snugly but don't force it. If you're unsure about proper installation technique, contact Strike Industries customer support or consult a local gunsmith.
SKU: 115746395 • Width: 1.5in • Height: 1.4in • Depth: 3.7in • Weight: 0.06oz