Strike Industries115663175
Strike Industries EMPP320 Enhanced Magazine Plate +5rd Extension for Sig P320, 9mm Luger, Black Polymer$18.95
Availability: In Stock
The Strike Industries EMPTG3 Enhanced Magazine Plate is a +5-round capacity extension for Taurus G3 9mm magazines that delivers both extra ammunition and practical shootability improvements. If you're running a Taurus G3 and want to maximize your on-board capacity without swapping platforms, this black polymer plate transforms your standard 15-round OEM magazine into a 20-round powerhouse while maintaining a clean, integrated look that complements the G3's aggressive lines.
What sets the EMPTG3 apart from basic capacity extensions is its design philosophy: the geometry is optimized for smooth magazine reloads with minimal drag or snag when seating rounds or reloading under pressure. The included steel locking plate adds mechanical security to the assembly, keeping everything locked down during hard use at the range or in competition. Installation comes with a steel locking plate set screw and hex tool, though Strike Industries emphasizes that the set screw should only be tightened until flush—not forced beyond that point, which can damage the product. All the hardware and an extended-length spring come in the box.
The black polymer construction is impact-resistant, so it handles the wear that comes with regular practice or match shooting. If you compete in USPSA 140mm Race Division, this plate stays within capacity limits. Just be aware that the EMPTG3 is engineered specifically for the Taurus G3 15-round magazine and is not compatible with the G3 17-round magazine or the G3c/G2c lines.
| Manufacturer | Strike Industries |
| Product | EMPTG3 Enhanced Magazine Plate |
| Caliber | 9mm Luger |
| Capacity Increase | +5 rounds |
| Material | Black polymer with steel locking plate |
| Compatibility | Taurus G3 15-round magazines only |
| Contents | Extended Magazine Plate, extended-length spring, steel locking plate, M4x0.07 set screw, hex tool |
Yes, the EMPTG3 is designed specifically for Taurus G3 15-round magazines. It is not compatible with the G3 17-round magazine, nor will it fit G3c or G2c models and their 10-round magazines.
Tighten the M4 set screw only until it is flush with the back of the EMP body. Do not over-tighten beyond that point, as excessive force can damage the polymer plate. Refer to Strike Industries' instructional video for visual guidance, or contact a gunsmith if you are unsure.
The package includes the extended magazine plate, an extended-length spring, a steel locking plate, a steel locking plate set screw (M4x0.07), and a hex tool for installation.
Yes, the EMPTG3 complies with USPSA 140mm Race Division capacity limits.
SKU: 115752127 • Width: 4.3in • Height: 1.3in • Depth: 11in • Weight: 0.1oz
Availability: In Stock
The Strike Industries EMPTG3 Enhanced Magazine Plate is a +5-round capacity extension for Taurus G3 9mm magazines that delivers both extra ammunition and practical shootability improvements. If you're running a Taurus G3 and want to maximize your on-board capacity without swapping platforms, this black polymer plate transforms your standard 15-round OEM magazine into a 20-round powerhouse while maintaining a clean, integrated look that complements the G3's aggressive lines.
What sets the EMPTG3 apart from basic capacity extensions is its design philosophy: the geometry is optimized for smooth magazine reloads with minimal drag or snag when seating rounds or reloading under pressure. The included steel locking plate adds mechanical security to the assembly, keeping everything locked down during hard use at the range or in competition. Installation comes with a steel locking plate set screw and hex tool, though Strike Industries emphasizes that the set screw should only be tightened until flush—not forced beyond that point, which can damage the product. All the hardware and an extended-length spring come in the box.
The black polymer construction is impact-resistant, so it handles the wear that comes with regular practice or match shooting. If you compete in USPSA 140mm Race Division, this plate stays within capacity limits. Just be aware that the EMPTG3 is engineered specifically for the Taurus G3 15-round magazine and is not compatible with the G3 17-round magazine or the G3c/G2c lines.
| Manufacturer | Strike Industries |
| Product | EMPTG3 Enhanced Magazine Plate |
| Caliber | 9mm Luger |
| Capacity Increase | +5 rounds |
| Material | Black polymer with steel locking plate |
| Compatibility | Taurus G3 15-round magazines only |
| Contents | Extended Magazine Plate, extended-length spring, steel locking plate, M4x0.07 set screw, hex tool |
Yes, the EMPTG3 is designed specifically for Taurus G3 15-round magazines. It is not compatible with the G3 17-round magazine, nor will it fit G3c or G2c models and their 10-round magazines.
Tighten the M4 set screw only until it is flush with the back of the EMP body. Do not over-tighten beyond that point, as excessive force can damage the polymer plate. Refer to Strike Industries' instructional video for visual guidance, or contact a gunsmith if you are unsure.
The package includes the extended magazine plate, an extended-length spring, a steel locking plate, a steel locking plate set screw (M4x0.07), and a hex tool for installation.
Yes, the EMPTG3 complies with USPSA 140mm Race Division capacity limits.
SKU: 115752127 • Width: 4.3in • Height: 1.3in • Depth: 11in • Weight: 0.1oz