Availability: In Stock
The Strike Industries Cookie Cutter Compensator is a purpose-built muzzle brake for .308 Winchester and 7.62×51mm NATO AR-platform rifles designed to control recoil and muzzle rise during rapid fire. Built with a single-chamber design and large surface area, this black matte steel compensator works on the principle of redirecting gas to counteract vertical climb and pushback—critical advantages when shooting short-barrel rifles, AR pistols, or any setup where managing recoil matters. The 5/8"-24 threading makes it compatible with standard .308 AR uppers.
Fair warning: this is a muzzle brake, not a flash suppressor. You'll experience significant side concussion, so proper hand placement and awareness of nearby shooters is essential. The large reflecting surfaces that make it effective at taming recoil also mean loud, lateral blast—something to plan for at the range or in the field. That same robust design makes it durable and aggressive-looking, and Strike Industries notes it can even function as a glass breaker in a pinch.
At 1.57 inches overall length with a 0.26-inch bore diameter and 2.14-inch outer diameter, it's a compact addition to your .308 build that won't interfere with optic mounting or handguard clearance on most platforms. The black matte finish resists corrosion and pairs cleanly with modern rifle aesthetics.
| Brand | Strike Industries |
| Model | CCCOMP308 |
| Caliber/Cartridge | .308 Winchester, 7.62×51mm NATO |
| Thread Pattern | 5/8"-24 |
| Overall Length | 1.57" |
| Bore Diameter (ID) | 0.26" |
| Outer Diameter (OD) | 2.14" |
| Material | Steel |
| Finish | Black Matte |
| Platform | AR-15 Rifle Platform (.308 upper receivers) |
| Type | Muzzle Brake |
The Strike Industries Cookie Cutter Compensator is threaded for 5/8"-24 and is designed for .308 Winchester and 7.62×51mm NATO AR-platform rifles. Verify your upper receiver uses standard 5/8"-24 threads before purchasing.
At 1.57 inches overall length and 2.14 inches outer diameter, this is a compact muzzle device, but handguard clearance depends on your specific upper and rail system. Measure your available space from the barrel end to your handguard before installation.
No. The Cookie Cutter Compensator is a muzzle brake designed to reduce recoil and muzzle rise. It is not engineered as a flash suppressor.
This brake produces significant side concussion. You must be aware of hand placement and inform any shooters beside you. Proper ear protection and shooter spacing are essential when using this compensator.
SKU: 115861279 • Width: 2.3in • Height: 1.8in • Depth: 2.7in • Weight: 0.55oz
Availability: In Stock
The Strike Industries Cookie Cutter Compensator is a purpose-built muzzle brake for .308 Winchester and 7.62×51mm NATO AR-platform rifles designed to control recoil and muzzle rise during rapid fire. Built with a single-chamber design and large surface area, this black matte steel compensator works on the principle of redirecting gas to counteract vertical climb and pushback—critical advantages when shooting short-barrel rifles, AR pistols, or any setup where managing recoil matters. The 5/8"-24 threading makes it compatible with standard .308 AR uppers.
Fair warning: this is a muzzle brake, not a flash suppressor. You'll experience significant side concussion, so proper hand placement and awareness of nearby shooters is essential. The large reflecting surfaces that make it effective at taming recoil also mean loud, lateral blast—something to plan for at the range or in the field. That same robust design makes it durable and aggressive-looking, and Strike Industries notes it can even function as a glass breaker in a pinch.
At 1.57 inches overall length with a 0.26-inch bore diameter and 2.14-inch outer diameter, it's a compact addition to your .308 build that won't interfere with optic mounting or handguard clearance on most platforms. The black matte finish resists corrosion and pairs cleanly with modern rifle aesthetics.
| Brand | Strike Industries |
| Model | CCCOMP308 |
| Caliber/Cartridge | .308 Winchester, 7.62×51mm NATO |
| Thread Pattern | 5/8"-24 |
| Overall Length | 1.57" |
| Bore Diameter (ID) | 0.26" |
| Outer Diameter (OD) | 2.14" |
| Material | Steel |
| Finish | Black Matte |
| Platform | AR-15 Rifle Platform (.308 upper receivers) |
| Type | Muzzle Brake |
The Strike Industries Cookie Cutter Compensator is threaded for 5/8"-24 and is designed for .308 Winchester and 7.62×51mm NATO AR-platform rifles. Verify your upper receiver uses standard 5/8"-24 threads before purchasing.
At 1.57 inches overall length and 2.14 inches outer diameter, this is a compact muzzle device, but handguard clearance depends on your specific upper and rail system. Measure your available space from the barrel end to your handguard before installation.
No. The Cookie Cutter Compensator is a muzzle brake designed to reduce recoil and muzzle rise. It is not engineered as a flash suppressor.
This brake produces significant side concussion. You must be aware of hand placement and inform any shooters beside you. Proper ear protection and shooter spacing are essential when using this compensator.
SKU: 115861279 • Width: 2.3in • Height: 1.8in • Depth: 2.7in • Weight: 0.55oz