Strike Industries144600563
Strike Industries Arcmscfgfde Cobra Fore Grip Fde Polymer$25.95
Availability: In Stock
Current Stock: Out of stock
The Strike Industries Cobra Fore Grip in black polymer is a lightweight, ergonomic handguard accessory built for shooters who demand comfort and control across different grip techniques and shooting positions. Unlike one-size-fits-all grips, the Cobra Fore Grip is engineered with multiple grip angle options so shooters of varying hand sizes can find a natural, unstrained hold—whether you're prone behind a rifle, standing at the range, or braced against barricade. The ridged face design anchors your grip against tables, walls, or other shooting surfaces, preventing slip during recoil and ensuring consistent weapon manipulation.
This Cobra Fore Grip leverages Strike Industries' patented SI LINK mounting system, making it compatible with both M-LOK and KeyMod rail slots found on most modern AR-pattern handguards. Installation is straightforward: the included screws, nuts, and Torx tool (T20) get you up and running in minutes. Torque the LINK fasteners to no more than 20 in/lbs during setup and periodically as part of routine maintenance.
A standout feature is the integrated SI Cable Management System (CMS), which solves a real-world problem: tangled wires from weapon lights and other rail-mounted accessories. Route excess cable alongside the handguard, across to the opposite side, at 90 degrees, or in a U-shape loop—keeping your setup clean and snag-free. The Cobra Fore Grip is molded from Strike Industries' custom SI Polymer Extreme material, delivering high-impact resistance in a design that won't add unnecessary weight to your rifle.
| Brand | Strike Industries |
| Model | Cobra Fore Grip (LINK) |
| Color | Black |
| Material | SI Polymer Extreme |
| Mount Type | M-LOK and KeyMod compatible |
| Max Torque (LINK Screws) | 20 in/lbs (2.26 Nm) |
| Included Hardware | 2 Screws, 2 Nuts, T20 Torx Key, Loctite Blue 243 Threadlocker, Warning Card |
Yes, if your handguard has M-LOK or KeyMod slots. The patented SI LINK mounting system works with both standards. The included screws and nuts will fit standard LINK-compatible rail slots.
The Cobra Fore Grip is designed with multiple ergonomic grip options built into its shape, allowing shooters of different hand sizes and preferences to find a natural hold without strain. The ridged face also aids barricade shooting.
The SI Cable Management System (CMS) allows you to route excess wires from weapon lights or other cabled accessories in multiple directions—alongside the handguard, across to the other side, at 90 degrees, or in a U-shape. This keeps cables organized and prevents snagging.
The package includes 2 screws, 2 nuts, a T20 Torx key, Loctite Blue 243 threadlocker, and a warning card. Do not exceed 20 in/lbs (2.26 Nm) when torquing the LINK screws. Check fasteners regularly as part of preventive maintenance.
SKU: 144599736 • Width: 1.8in • Height: 1.3in • Depth: 4.2in • Weight: 0.1oz
Availability: In Stock
Current Stock: Out of stock
The Strike Industries Cobra Fore Grip in black polymer is a lightweight, ergonomic handguard accessory built for shooters who demand comfort and control across different grip techniques and shooting positions. Unlike one-size-fits-all grips, the Cobra Fore Grip is engineered with multiple grip angle options so shooters of varying hand sizes can find a natural, unstrained hold—whether you're prone behind a rifle, standing at the range, or braced against barricade. The ridged face design anchors your grip against tables, walls, or other shooting surfaces, preventing slip during recoil and ensuring consistent weapon manipulation.
This Cobra Fore Grip leverages Strike Industries' patented SI LINK mounting system, making it compatible with both M-LOK and KeyMod rail slots found on most modern AR-pattern handguards. Installation is straightforward: the included screws, nuts, and Torx tool (T20) get you up and running in minutes. Torque the LINK fasteners to no more than 20 in/lbs during setup and periodically as part of routine maintenance.
A standout feature is the integrated SI Cable Management System (CMS), which solves a real-world problem: tangled wires from weapon lights and other rail-mounted accessories. Route excess cable alongside the handguard, across to the opposite side, at 90 degrees, or in a U-shape loop—keeping your setup clean and snag-free. The Cobra Fore Grip is molded from Strike Industries' custom SI Polymer Extreme material, delivering high-impact resistance in a design that won't add unnecessary weight to your rifle.
| Brand | Strike Industries |
| Model | Cobra Fore Grip (LINK) |
| Color | Black |
| Material | SI Polymer Extreme |
| Mount Type | M-LOK and KeyMod compatible |
| Max Torque (LINK Screws) | 20 in/lbs (2.26 Nm) |
| Included Hardware | 2 Screws, 2 Nuts, T20 Torx Key, Loctite Blue 243 Threadlocker, Warning Card |
Yes, if your handguard has M-LOK or KeyMod slots. The patented SI LINK mounting system works with both standards. The included screws and nuts will fit standard LINK-compatible rail slots.
The Cobra Fore Grip is designed with multiple ergonomic grip options built into its shape, allowing shooters of different hand sizes and preferences to find a natural hold without strain. The ridged face also aids barricade shooting.
The SI Cable Management System (CMS) allows you to route excess wires from weapon lights or other cabled accessories in multiple directions—alongside the handguard, across to the other side, at 90 degrees, or in a U-shape. This keeps cables organized and prevents snagging.
The package includes 2 screws, 2 nuts, a T20 Torx key, Loctite Blue 243 threadlocker, and a warning card. Do not exceed 20 in/lbs (2.26 Nm) when torquing the LINK screws. Check fasteners regularly as part of preventive maintenance.
SKU: 144599736 • Width: 1.8in • Height: 1.3in • Depth: 4.2in • Weight: 0.1oz