Standard Manufacturing120916796
Standard Manufacturing Dp12 12Ga 18.5 Blk Works Package #1$2,081.25
Availability: In Stock
Current Stock: Out of stock
The Standard Manufacturing DP-12 12 gauge shotgun is a dual-barrel pump-action design that delivers serious firepower in a compact tactical package. Built from aircraft-grade 7075 aluminum with a thermal-coated receiver, this 18.5" defense shotgun feeds two rounds per trigger pull from independent magazine tubes, cycling through a total capacity of 16 rounds (14 in tubes plus 2 in chambers). It's engineered for shooters who prioritize reliability and rapid follow-up shots in high-stress scenarios—home defense, professional security, or competition environments where speed and redundancy matter.
The Works Package #2 transforms the DP-12 into a fully configured tactical platform right out of the box. You get a red dot reflex sight, 45° offset flip-up backups, a high riser block, MOE rail segments, a two-point tactical sling, pressure-switch-activated flashlight, green laser module, and door-breaching chokes. This accessory suite removes the guesswork from setup and gets you running immediately. Assembly of some components is required, but the included instruction booklet walks you through it. The shotgun also ships with a choke tube wrench and heavy-duty lock for security and maintenance.
Ergonomics are central to the design: ambidextrous safety and pump-slide release accommodate both right and left-handed shooters, co-molded rubber grips reduce fatigue, and a dual-spring recoil pad absorbs felt impulse despite the gun's punch. The synthetic stock and composite forend keep weight at 9 lbs 12 oz unloaded—manageable for extended handling. Spreader choke tubes installed in both barrels concentrate shot pattern at close range (25 yards), ideal for dynamic shooting. Two Picatinny rails (a 7-slot bottom run near the foregrip and a 13-slot top run) plus integrated slots give you the platform to dial in exactly what you need.
Standard Manufacturing backs this shotgun with a warranty—fill out and register the included card to activate coverage. A QR code on the stock lets you scan and download the full manual and documentation on your phone or tablet anytime.
| Gauge | 12 gauge |
| Barrel Length | 18.5 inches |
| Barrel Configuration | Dual barrels (2 x 18 7/8 inch) |
| Overall Length | 29.5 inches |
| Weight (Unloaded) | 9 lbs 12 oz |
| Chamber | 2¾" and 3" shells |
| Magazine Capacity | 14 rounds |
| Chamber Capacity | 2 rounds |
| Total Capacity | 16 rounds |
| Action Type | Pump action with dual inline shell feeding |
| Receiver Material | Machined aircraft-grade 7075 aluminum with thermal coating |
| Safety | Ambidextrous |
| Pump Release | Ambidextrous |
| Grip | Co-molded non-slip rubber pistol grip with composite front vertical grip |
| Stock | Synthetic |
| Forend | Composite material with MOE rail slots |
| Recoil Pad | Rubber with dual spring shock-absorbing mechanism |
| Choke Tubes | Spreader choke tubes (Tru-Choke thread pattern) in both barrels |
| Rail System | 7-slot Picatinny (bottom foregrip area), 13.75-slot Picatinny (top) |
| Sling Points | Front sling attachment and swivel attachment on stock |
| Finish | Black |
| Included Accessories (Works Package #2) | Red dot reflex sight, 45° offset flip-up sights, high riser block, MOE rail set (4-piece), two-point tactical sling, swivel set, flashlight with pressure-switch kit, flashlight Picatinny mount, green laser, door-breaching chokes, front mounting rail, choke tube wrench, heavy-duty lock, instruction booklet, warranty card |
Both barrels are chambered for 2¾" or 3" 12 gauge shells, so you have flexibility in ammunition choice. The spreader choke tubes included are optimized for pattern density at 25 yards.
Yes. The 18.5" barrel length, 16-round capacity, and rapid dual-round-per-trigger functionality make it well-suited for home defense scenarios. The Works Package #2 arrives with a light, laser, backup sights, and tactical sling, all factory-installed or ready to install, so you can deploy it immediately. However, local firearms laws vary—always verify compliance with your jurisdiction before purchase and use.
The Works Package #2 includes a red dot reflex sight, 45° offset flip-up sights, a high riser block, a 4-piece MOE rail set, a two-point black tactical sling, a swivel set, a flashlight with pressure-switch kit and Picatinny mount, a green laser module, door-breaching chokes, a front mounting rail, choke tube wrench, heavy-duty lock, instruction booklet, and warranty card. Some assembly of accessories is required.
Yes. The shotgun features two Picatinny rails—a 7-slot rail along the bottom near the foregrip and a 13-slot rail on top—plus integrated slots in the composite forend for MOE rail sections. This gives you extensive platform flexibility to add optics, lights, lasers, grips, or other Picatinny-compatible gear beyond what the Works Package #2 includes.
The DP-12 features an ambidextrous safety and ambidextrous pump-slide release, making it accessible and efficient for both right and left-handed shooters.
SKU: 120918564 • Weight: 12.75oz
Availability: In Stock
Current Stock: Out of stock
The Standard Manufacturing DP-12 12 gauge shotgun is a dual-barrel pump-action design that delivers serious firepower in a compact tactical package. Built from aircraft-grade 7075 aluminum with a thermal-coated receiver, this 18.5" defense shotgun feeds two rounds per trigger pull from independent magazine tubes, cycling through a total capacity of 16 rounds (14 in tubes plus 2 in chambers). It's engineered for shooters who prioritize reliability and rapid follow-up shots in high-stress scenarios—home defense, professional security, or competition environments where speed and redundancy matter.
The Works Package #2 transforms the DP-12 into a fully configured tactical platform right out of the box. You get a red dot reflex sight, 45° offset flip-up backups, a high riser block, MOE rail segments, a two-point tactical sling, pressure-switch-activated flashlight, green laser module, and door-breaching chokes. This accessory suite removes the guesswork from setup and gets you running immediately. Assembly of some components is required, but the included instruction booklet walks you through it. The shotgun also ships with a choke tube wrench and heavy-duty lock for security and maintenance.
Ergonomics are central to the design: ambidextrous safety and pump-slide release accommodate both right and left-handed shooters, co-molded rubber grips reduce fatigue, and a dual-spring recoil pad absorbs felt impulse despite the gun's punch. The synthetic stock and composite forend keep weight at 9 lbs 12 oz unloaded—manageable for extended handling. Spreader choke tubes installed in both barrels concentrate shot pattern at close range (25 yards), ideal for dynamic shooting. Two Picatinny rails (a 7-slot bottom run near the foregrip and a 13-slot top run) plus integrated slots give you the platform to dial in exactly what you need.
Standard Manufacturing backs this shotgun with a warranty—fill out and register the included card to activate coverage. A QR code on the stock lets you scan and download the full manual and documentation on your phone or tablet anytime.
| Gauge | 12 gauge |
| Barrel Length | 18.5 inches |
| Barrel Configuration | Dual barrels (2 x 18 7/8 inch) |
| Overall Length | 29.5 inches |
| Weight (Unloaded) | 9 lbs 12 oz |
| Chamber | 2¾" and 3" shells |
| Magazine Capacity | 14 rounds |
| Chamber Capacity | 2 rounds |
| Total Capacity | 16 rounds |
| Action Type | Pump action with dual inline shell feeding |
| Receiver Material | Machined aircraft-grade 7075 aluminum with thermal coating |
| Safety | Ambidextrous |
| Pump Release | Ambidextrous |
| Grip | Co-molded non-slip rubber pistol grip with composite front vertical grip |
| Stock | Synthetic |
| Forend | Composite material with MOE rail slots |
| Recoil Pad | Rubber with dual spring shock-absorbing mechanism |
| Choke Tubes | Spreader choke tubes (Tru-Choke thread pattern) in both barrels |
| Rail System | 7-slot Picatinny (bottom foregrip area), 13.75-slot Picatinny (top) |
| Sling Points | Front sling attachment and swivel attachment on stock |
| Finish | Black |
| Included Accessories (Works Package #2) | Red dot reflex sight, 45° offset flip-up sights, high riser block, MOE rail set (4-piece), two-point tactical sling, swivel set, flashlight with pressure-switch kit, flashlight Picatinny mount, green laser, door-breaching chokes, front mounting rail, choke tube wrench, heavy-duty lock, instruction booklet, warranty card |
Both barrels are chambered for 2¾" or 3" 12 gauge shells, so you have flexibility in ammunition choice. The spreader choke tubes included are optimized for pattern density at 25 yards.
Yes. The 18.5" barrel length, 16-round capacity, and rapid dual-round-per-trigger functionality make it well-suited for home defense scenarios. The Works Package #2 arrives with a light, laser, backup sights, and tactical sling, all factory-installed or ready to install, so you can deploy it immediately. However, local firearms laws vary—always verify compliance with your jurisdiction before purchase and use.
The Works Package #2 includes a red dot reflex sight, 45° offset flip-up sights, a high riser block, a 4-piece MOE rail set, a two-point black tactical sling, a swivel set, a flashlight with pressure-switch kit and Picatinny mount, a green laser module, door-breaching chokes, a front mounting rail, choke tube wrench, heavy-duty lock, instruction booklet, and warranty card. Some assembly of accessories is required.
Yes. The shotgun features two Picatinny rails—a 7-slot rail along the bottom near the foregrip and a 13-slot rail on top—plus integrated slots in the composite forend for MOE rail sections. This gives you extensive platform flexibility to add optics, lights, lasers, grips, or other Picatinny-compatible gear beyond what the Works Package #2 includes.
The DP-12 features an ambidextrous safety and ambidextrous pump-slide release, making it accessible and efficient for both right and left-handed shooters.
SKU: 120918564 • Weight: 12.75oz