Sinclair International197558869
Sinclair International Primer Pocket Uniformer Kit, Premium, With Case, Carbide$187.49
Availability: In Stock
Current Stock: Out of stock
The Sinclair International Case Preparation Power Center is a motorized case prep unit built for reloaders who want to reclaim hours lost to hand case preparation. Instead of the repetitive, hand-numbing work of uniforming primer pockets, deburring flash holes, cleaning case necks, and turning case necks by hand, this compact unit handles the heavy lifting with a quiet, low-RPM motor that won't fatigue you or your equipment. Whether you're prepping brass for precision rifle loads, competition rounds, or high-volume hunting ammunition, the Power Center turns a tedious bottleneck into a manageable, consistent operation.
At the heart of the system is a carefully selected motor paired with a gearhead that delivers 200 RPM and 43 inch-pounds of torque—enough power to work thick case necks without overheating or bogging down during extended use. The motor and gearhead are fully enclosed in a vented housing, keeping all electronics protected and out of sight. A top-mounted on/off switch sits exactly where your hand naturally rests, which is critical when you're doing frequent stops during neck-turning operations. The large platform base provides ample clamping surface, and a standard 6-foot grounded power cord keeps you mobile on the bench.
The 3/8-inch keyless chuck accepts nearly every Sinclair case prep tool in the lineup, making it a versatile centerpiece for your reloading workflow. For neck-turning work, Sinclair recommends pairing the Power Center with their Case Drivers to secure cases firmly during the operation. This is the kind of equipment that pays for itself in time saved and consistency gained, especially if you're processing brass in volume or working with tight case-neck tolerances.
| Motor Speed | 200 RPM |
| Torque Rating | 43 inch-pounds |
| Chuck Capacity | 3/8 inch keyless chuck |
| Power Cord Length | 6 feet (grounded plug) |
| Motor Housing | Fully enclosed, vented |
| Control | Top-mounted on/off switch |
The 3/8-inch keyless chuck accepts nearly every Sinclair case prep tool, including primer pocket uniformers, flash hole deburring tools, inside case neck cleaners, and chamfering/deburring tools. For neck-turning operations, Sinclair recommends using their Case Drivers to hold cases securely in the chuck.
Yes. The motor produces 43 inch-pounds of torque at 200 RPM—enough to handle thick case necks without overheating or stalling during extended prep sessions. The low RPM design also gives you precise control during finishing operations.
Absolutely. The enclosed motor and gearhead are designed to run continuously without overheating, and the ergonomic top-mounted switch makes it easy to load, unload, and restart cases. The large platform provides stable mounting for your tools and cases.
You receive the motorized prep unit with the 3/8-inch keyless chuck and 6-foot grounded power cord. Case prep tools (uniformers, deburring tools, etc.) are sold separately.
SKU: 167527997 • Weight: 7.28oz
Availability: In Stock
Current Stock: Out of stock
The Sinclair International Case Preparation Power Center is a motorized case prep unit built for reloaders who want to reclaim hours lost to hand case preparation. Instead of the repetitive, hand-numbing work of uniforming primer pockets, deburring flash holes, cleaning case necks, and turning case necks by hand, this compact unit handles the heavy lifting with a quiet, low-RPM motor that won't fatigue you or your equipment. Whether you're prepping brass for precision rifle loads, competition rounds, or high-volume hunting ammunition, the Power Center turns a tedious bottleneck into a manageable, consistent operation.
At the heart of the system is a carefully selected motor paired with a gearhead that delivers 200 RPM and 43 inch-pounds of torque—enough power to work thick case necks without overheating or bogging down during extended use. The motor and gearhead are fully enclosed in a vented housing, keeping all electronics protected and out of sight. A top-mounted on/off switch sits exactly where your hand naturally rests, which is critical when you're doing frequent stops during neck-turning operations. The large platform base provides ample clamping surface, and a standard 6-foot grounded power cord keeps you mobile on the bench.
The 3/8-inch keyless chuck accepts nearly every Sinclair case prep tool in the lineup, making it a versatile centerpiece for your reloading workflow. For neck-turning work, Sinclair recommends pairing the Power Center with their Case Drivers to secure cases firmly during the operation. This is the kind of equipment that pays for itself in time saved and consistency gained, especially if you're processing brass in volume or working with tight case-neck tolerances.
| Motor Speed | 200 RPM |
| Torque Rating | 43 inch-pounds |
| Chuck Capacity | 3/8 inch keyless chuck |
| Power Cord Length | 6 feet (grounded plug) |
| Motor Housing | Fully enclosed, vented |
| Control | Top-mounted on/off switch |
The 3/8-inch keyless chuck accepts nearly every Sinclair case prep tool, including primer pocket uniformers, flash hole deburring tools, inside case neck cleaners, and chamfering/deburring tools. For neck-turning operations, Sinclair recommends using their Case Drivers to hold cases securely in the chuck.
Yes. The motor produces 43 inch-pounds of torque at 200 RPM—enough to handle thick case necks without overheating or stalling during extended prep sessions. The low RPM design also gives you precise control during finishing operations.
Absolutely. The enclosed motor and gearhead are designed to run continuously without overheating, and the ergonomic top-mounted switch makes it easy to load, unload, and restart cases. The large platform provides stable mounting for your tools and cases.
You receive the motorized prep unit with the 3/8-inch keyless chuck and 6-foot grounded power cord. Case prep tools (uniformers, deburring tools, etc.) are sold separately.
SKU: 167527997 • Weight: 7.28oz