Strike Industries144597150
Si Ar-Cms-Saf-Fde Angled Grp Cable Mlok Fde$21.95
Loading...
Loading...
Loading...
Availability: In Stock
The Strike Industries angled grip with cable management system is an M-LOK compatible rail attachment designed to bring control and organization to your AR platform. Built at an 86-degree angle, this ergonomic grip gives your support hand a natural purchase on the handguard while you're running lights, lasers, or other cabled accessories—and it keeps those cables neat instead of dangling. Strike's proprietary Cable Management System (patent pending) routes wires alongside the rail, at 90 degrees, or in a U-shape loop, so excess cable stays stowed and out of the way. Whether you're shooting prone, standing, or moving through tight cover, a clean setup means faster transitions and fewer snags.
Built from Strike's SI Polymer Extreme material, this grip strikes the balance between lightweight and durable enough to handle whatever you throw at it. The textured palm and finger surfaces give you positive control in all conditions, while the flat sides keep your hand from rolling during manipulation. The modular design lets you stack the optional Strike Stacked Angled Grip Extension (sold separately) to dial in the exact length that suits your hand and shooting style—a genuine advantage if you're running different rigs or shooting with gloved hands in cold weather.
Installation is straightforward with the included hardware and Torx key. The package comes with everything you need to get it mounted: two screws, two nuts, threadlocker, and clear instructions. Just keep the torque under 20 in-lbs during installation and check everything periodically as part of routine maintenance—standard practice on any modular system.
| Brand | Strike Industries |
| Mount Type | M-LOK compatible |
| Grip Angle | 86 degrees |
| Material | SI Polymer Extreme |
| Included Hardware | 2 screws, 2 nuts, Torx key (T20), Loctite Blue 243, end plate, warning card |
| Torque Spec | Do not exceed 20 in-lbs (2.26 Nm) |
| Expandable | Yes, with optional Strike Stacked Angled Grip Extension (sold separately) |
The Strike angled grip mounts to any handguard with M-LOK slots. If your rail uses M-LOK—whether Magpul, Midwest Industries, or any other M-LOK standard—this grip will clamp on securely.
Yes. The base grip included here is stackable. By purchasing the optional Strike Stacked Angled Grip Extension separately, you can add length to customize the grip for your hand size or to adapt to different shooting techniques and scenarios.
The built-in Cable Management System stores excess cable from weapon lights or other cabled accessories. You can route wires alongside the handguard, bend them 90 degrees, or loop them in a U-shape—keeping everything organized and preventing snags during transitions or movement.
You get the Strike Stacked Angled Grip with Cable Management base unit, an end plate, two screws, two nuts, a T20 Torx key, Loctite threadlocker, and a warning card with installation details. You'll have everything needed to mount it—no additional hardware required for the base installation.
SKU: 144599740 • Width: 1.9in • Height: 1.8in • Depth: 4.7in • Weight: 0.11oz
Availability: In Stock
The Strike Industries angled grip with cable management system is an M-LOK compatible rail attachment designed to bring control and organization to your AR platform. Built at an 86-degree angle, this ergonomic grip gives your support hand a natural purchase on the handguard while you're running lights, lasers, or other cabled accessories—and it keeps those cables neat instead of dangling. Strike's proprietary Cable Management System (patent pending) routes wires alongside the rail, at 90 degrees, or in a U-shape loop, so excess cable stays stowed and out of the way. Whether you're shooting prone, standing, or moving through tight cover, a clean setup means faster transitions and fewer snags.
Built from Strike's SI Polymer Extreme material, this grip strikes the balance between lightweight and durable enough to handle whatever you throw at it. The textured palm and finger surfaces give you positive control in all conditions, while the flat sides keep your hand from rolling during manipulation. The modular design lets you stack the optional Strike Stacked Angled Grip Extension (sold separately) to dial in the exact length that suits your hand and shooting style—a genuine advantage if you're running different rigs or shooting with gloved hands in cold weather.
Installation is straightforward with the included hardware and Torx key. The package comes with everything you need to get it mounted: two screws, two nuts, threadlocker, and clear instructions. Just keep the torque under 20 in-lbs during installation and check everything periodically as part of routine maintenance—standard practice on any modular system.
| Brand | Strike Industries |
| Mount Type | M-LOK compatible |
| Grip Angle | 86 degrees |
| Material | SI Polymer Extreme |
| Included Hardware | 2 screws, 2 nuts, Torx key (T20), Loctite Blue 243, end plate, warning card |
| Torque Spec | Do not exceed 20 in-lbs (2.26 Nm) |
| Expandable | Yes, with optional Strike Stacked Angled Grip Extension (sold separately) |
The Strike angled grip mounts to any handguard with M-LOK slots. If your rail uses M-LOK—whether Magpul, Midwest Industries, or any other M-LOK standard—this grip will clamp on securely.
Yes. The base grip included here is stackable. By purchasing the optional Strike Stacked Angled Grip Extension separately, you can add length to customize the grip for your hand size or to adapt to different shooting techniques and scenarios.
The built-in Cable Management System stores excess cable from weapon lights or other cabled accessories. You can route wires alongside the handguard, bend them 90 degrees, or loop them in a U-shape—keeping everything organized and preventing snags during transitions or movement.
You get the Strike Stacked Angled Grip with Cable Management base unit, an end plate, two screws, two nuts, a T20 Torx key, Loctite threadlocker, and a warning card with installation details. You'll have everything needed to mount it—no additional hardware required for the base installation.
SKU: 144599740 • Width: 1.9in • Height: 1.8in • Depth: 4.7in • Weight: 0.11oz